1. Introduction
The Myuet ME102 Smart Wifi Electric Heating Temperature Controller is designed for efficient and convenient control of floor heating systems. Featuring a 3.5-inch color touch screen, it offers advanced functionalities including weekly programming, power-off memory, and smart control via a mobile application. It also supports voice control through Amazon Alexa and Google Assistant, providing a modern solution for managing your home's heating.

Myuet ME102 Smart Wifi Thermostat in a modern living room setting.
Video: Overview of Myuet ME102 Smart Thermostat features and operation, including touch screen, programming, and app control.
2. Package Contents
Upon opening the package, please verify that all items are present and in good condition:
- 1 x Myuet ME102 Thermostat
- 1 x 3m Sensor Cable
- 2 x Mounting Screws
- 1 x English Instruction Manual

Contents of the Myuet ME102 Thermostat package.
3. Installation and Wiring
ATTENTION: Installation should be performed by a qualified professional to ensure safety and proper functionality.
3.1 Dimensions
The thermostat has a compact design suitable for standard wall mounting. Refer to the diagram below for precise measurements.

Dimensions of the Myuet ME102 Thermostat: 86mm (H) x 86mm (W) with a visible depth of 15mm.
3.2 Wiring Diagram
Ensure correct wiring according to your specific model (ME102H.16 or ME102H.03) and local electrical codes. The sensor is R25℃=10KΩ, β=3950.

Wiring diagrams for ME102H.16 (16A) and ME102H.03 (3A) models.
For ME102H.16 (16A model):
- Terminals 1 & 2: Sensor (R25℃=10KΩ, β=3950)
- Terminal L: Live input
- Terminal N: Neutral input
- Terminal N1: Neutral output to heating load
- Terminal L1: Live output to heating load (Max 16A)
For ME102H.03 (3A model):
- Terminals 1 & 2: Sensor (R25℃=10KΩ, β=3950)
- Terminal L: Live input
- Terminal N: Neutral input
- Terminal NO: Normally Open contact for heating load (Max 3A)
- Terminal NC: Normally Closed contact for heating load (Max 3A)
4. Operating Instructions
4.1 Touch Screen Interface
The ME102 features a 3.5-inch color touch screen for easy operation. The main display shows current temperature, set temperature, time, and various mode indicators.

Key display elements and their functions on the ME102 thermostat.
- Power Key: Turns the thermostat on/off.
- Week/Time: Displays current day and time.
- Heating Icon: Indicates active heating.
- Away Mode: Sets the thermostat to an energy-saving mode when you are away.
- Hold Mode: Maintains a set temperature indefinitely.
- Floor Temperature: Displays the current floor temperature (if external sensor is used).
- Anti-frozen Icon: Indicates anti-freeze protection is active.
- WiFi Icon: Shows WiFi connection status.
- Lock Key: Child lock function.
- Up/Down Keys: Adjust temperature settings.
- Temperature Setting: Displays the target temperature.
- Mode Switch: Cycles through different operating modes.
- Retention Time: Displays duration for temporary settings.
4.2 Menu Navigation
Slide the screen to switch between different menu pages. Tap on an icon to access its settings.
- Time Settings: Adjust current time and date.
- BackLight: Control display backlight settings.
- Temperature Limit: Set maximum and minimum temperature limits.
- Schedule: Configure weekly heating programs (Weekday/Weekend).
- Floor Temperature Limit: Set limits for the floor sensor.
- Away: Activate or deactivate away mode.
- Defrost: Enable or disable defrost function.
- Sensor Selection: Choose between built-in, external, or both sensors.
- Holiday: Set holiday mode for extended periods away.
- Hold: Activate or deactivate hold mode.
- Standby Screen: Configure standby display options.
4.3 Weekly Programmable Thermostat
The ME102 allows for weekly programming, enabling you to set different temperature schedules for weekdays and weekends to optimize comfort and energy savings.
4.4 Power-off Memory Function
The thermostat retains all settings, including time and programmed schedules, even after a power outage, ensuring continuous operation without re-configuration.
4.5 Smart Control via Mobile App (WiFi Connection)
Connect your ME102 thermostat to your home WiFi network to control it remotely using a dedicated mobile application. This allows for intelligent temperature control from anywhere, anytime.

Remote control of the thermostat via the mobile app.
4.6 Voice Control Integration
The ME102 thermostat is compatible with Amazon Alexa and Google Assistant, allowing you to adjust settings using voice commands for hands-free convenience.

Voice control functionality with Amazon Alexa and Google Assistant.
4.7 Energy Saving Mode
Utilize the energy-saving mode to reduce power consumption and environmental impact, especially during periods of low occupancy.

The thermostat supports energy-saving modes.
5. Maintenance
To ensure optimal performance and longevity of your Myuet ME102 thermostat, follow these simple maintenance guidelines:
- Cleaning: Gently wipe the screen and exterior with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the device.
- Dust Removal: Periodically remove any dust accumulation around the thermostat's vents to ensure proper air circulation and sensor accuracy.
- Avoid Moisture: Keep the thermostat away from excessive moisture or direct water exposure.
6. Troubleshooting
If you encounter any issues with your Myuet ME102 thermostat, please refer to the following common troubleshooting steps:
- No Power: Check the circuit breaker and ensure the thermostat is correctly wired to the power supply.
- Heating Not Activating: Verify that the thermostat is in heating mode and the set temperature is higher than the current room temperature. Check wiring connections to the heating system.
- Inaccurate Temperature Reading: Ensure the sensor is properly installed and not obstructed. If using an external floor sensor, check its connection.
- WiFi Connection Issues: Confirm your home WiFi network is active and the password is correct. Try restarting your router and the thermostat. Ensure the thermostat is within range of your WiFi signal.
- Screen Unresponsive: Try restarting the thermostat by turning off and on the power. If the issue persists, contact customer support.
For more complex issues, please consult a qualified technician or contact customer support.
7. Specifications
Detailed technical specifications for the Myuet ME102 Thermostat:
| Feature | Specification |
|---|---|
| Voltage | 110-230V AC, 50/60Hz |
| Power Consumption | <2W |
| Current Loading | 16A |
| Temperature Setting Range | 5-95℃ |
| Temperature Limitation Range | 5-60℃ (factory setting: 60℃) |
| Switching Differential | ±1℃ |
| Ambient Temperature | -5-50℃ |
| Protective Housing | IP20 |
| Housing Material | Anti-flammable PC, V-0 |
| Sensor | Built-in sensor and floor sensor |
| Application | Floor heating system |
| Dimension (H/W/D) | 86/86/38mm |
| Model Number | ME10216 |
| Floor Heating Part Type | Floor Heating Thermostats |
| Type | Floor Heating Parts |
| Power (W) | 100w/m2 |
| Certification | CE |
Note: The 'Power (W)' specification of 100w/m2 likely refers to the heating system capacity the thermostat is designed to control, not the thermostat's own power consumption.
8. User Tips
- Optimize Schedules: Take advantage of the weekly programming feature to set different temperatures for various times of the day and week, aligning with your occupancy patterns to save energy.
- Remote Access: Download the companion mobile app and connect your thermostat to WiFi for convenient remote control, allowing you to adjust heating before you arrive home or check status while away.
- Voice Commands: Integrate with Amazon Alexa or Google Assistant for hands-free temperature adjustments, especially useful when your hands are full.
- Child Lock: Use the child lock feature to prevent accidental changes to settings, maintaining your desired heating schedule.
- Sensor Selection: Experiment with the sensor selection (built-in, external, or both) to find the most accurate and comfortable temperature sensing for your specific room and floor heating setup.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the MYUET Official Store or your local distributor. Keep your purchase receipt as proof of purchase.
Manufacturer: Shenzhen Myuet Energy Saving Equipment Co., LTD
Origin: Mainland China