Recordio GAX-EQ215S

Contents

Recordio GAX-EQ215S Graphic Equalizer User Manual

Model: GAX-EQ215S

Brand: Recordio

1. Introduction

Thank you for choosing the Recordio GAX-EQ215S Active Balanced Dual 15 Band Graphic Equalizer. This device is designed to provide precise control over your audio frequency spectrum, enhancing sound quality and allowing for acoustic optimization in various professional audio environments. Please read this manual thoroughly before operating the unit to ensure proper use and to maximize its performance and longevity.

2. Key Features

  • Dual 15-band graphic equalizer for precise frequency control.
  • Active balanced inputs and outputs for superior signal integrity.
  • Individual channel controls for range, EQ, and signal level.
  • High-Pass Filter (HPF) for low-frequency cut-off.
  • Dedicated Woofer Output with adjustable level and frequency.
  • Robust construction suitable for professional use.
Front view of the Recordio GAX-EQ215S Graphic Equalizer, highlighting its dual 15-band design.
Front view of the GAX-EQ215S, showcasing its dual 15-band controls.

3. Setup and Connections

3.1 Unpacking

Carefully unpack the GAX-EQ215S unit and check for any signs of damage. Ensure all components are present:

  • GAX-EQ215S Graphic Equalizer unit
  • Power cable
  • User manual
Contents of the GAX-EQ215S package, including the equalizer unit, power cable, and manual.
Included items: Equalizer unit, power cable, and user manual.

3.2 Power Connection

Connect the provided power cable to the AC INPUT on the rear panel of the equalizer and then to a suitable power outlet. The unit supports both 110V and 220V AC power (50-60Hz). Ensure the power switch is in the 'OFF' position before connecting to power.

3.3 Audio Connections

The GAX-EQ215S features balanced XLR and 1/4" Phone Jack (TRS) connectors for both input and output. Use high-quality balanced cables for optimal performance.

  1. Input: Connect your audio source (e.g., mixer, preamplifier) to the CHANNEL 1 INPUT and CHANNEL 2 INPUT using XLR or 1/4" TRS cables.
  2. Output: Connect the CHANNEL 1 OUTPUT and CHANNEL 2 OUTPUT to your amplifier or next audio device in the signal chain using XLR or 1/4" TRS cables.
  3. Woofer Output: If using a subwoofer, connect the WOOFER OUTPUT to your subwoofer amplifier. This output provides a summed mono signal with an adjustable low-pass filter.
Rear panel of the GAX-EQ215S showing XLR and 1/4 inch TRS inputs and outputs, woofer output, and power input.
Rear panel connections: Channel 1 & 2 Inputs/Outputs, Woofer Output, and AC Input.
Close-up of the rear panel connections with cables inserted, showing XLR and 1/4 inch TRS connections for Channel 1 and 2, and the Woofer Output.
Detailed view of connected audio cables on the rear panel.

4. Operating Instructions

4.1 Front Panel Controls

Front panel controls of the GAX-EQ215S, showing sliders for each frequency band, range buttons, EQ bypass, signal level meters, and input/output buttons.
Front panel controls for each channel.
  • Frequency Sliders (25Hz - 16KHz): Adjust the gain (+12dB to -12dB) for each of the 15 frequency bands per channel.
  • RANGE Button: Toggles the adjustment range of the frequency sliders between ±6dB and ±12dB.
  • EQ Button: Engages or bypasses the equalizer for the respective channel. When bypassed, the signal passes through unaffected.
  • SIGNAL dB Meter: LED indicators display the output signal level, including a CLIP indicator for overload.
  • LEVEL Knob: Adjusts the overall output level for the channel.
  • IN/OUT Button: Toggles the input/output signal path.
  • HPF (High-Pass Filter) Knob: Adjusts the cut-off frequency for the high-pass filter (20Hz - 250Hz).

4.2 Rear Panel Controls (Woofer Output)

  • WOOFER LEVEL Knob: Adjusts the output level of the dedicated subwoofer output.
  • WOOFER FREQ Knob: Adjusts the low-pass filter frequency for the subwoofer output (50Hz - 250Hz).

4.3 Basic Operation

  1. Ensure all connections are secure and the power switch is OFF.
  2. Turn on your audio source and amplifier.
  3. Switch the GAX-EQ215S power ON.
  4. Set all frequency sliders to the 0dB (center) position.
  5. Set the LEVEL knobs to the 0dB position.
  6. Press the EQ button to engage the equalizer.
  7. Play audio through the system. Adjust the individual frequency sliders to shape the sound to your preference or to compensate for room acoustics.
  8. Monitor the SIGNAL dB meters to avoid clipping (red CLIP LED). If clipping occurs, reduce the input level from your source or the LEVEL knob on the equalizer.
  9. Experiment with the RANGE button to see if a wider or narrower adjustment range suits your needs.
  10. If using a subwoofer, adjust the WOOFER LEVEL and WOOFER FREQ knobs on the rear panel to integrate the subwoofer with your main speakers.
Video demonstrating the operation of the GAX-EQ215S controls and connections.

5. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the exterior of the unit. Do not use liquid cleaners or solvents.
  • Ventilation: Ensure adequate ventilation around the unit to prevent overheating. Do not block ventilation openings.
  • Environment: Keep the unit away from direct sunlight, heat sources, dust, and moisture.
  • Power Off: Always power off the unit and disconnect it from the power supply before cleaning or if it will be unused for an extended period.

6. Troubleshooting

Problem Possible Cause Solution
No power Power cable disconnected; power switch OFF; faulty power outlet. Check power cable connection; ensure power switch is ON; try a different power outlet.
No sound output Incorrect audio connections; EQ bypassed; LEVEL knob too low; source device issues. Verify all audio cables are correctly connected; ensure EQ button is engaged; increase LEVEL knob; check your audio source device.
Distorted sound Input signal too high (clipping); output level too high; faulty cables. Reduce input level from source; lower the LEVEL knob on the equalizer; check for CLIP LED activity; try different audio cables.
Hum or noise Ground loop; unshielded cables; interference from other equipment. Use balanced cables; ensure proper grounding; separate audio cables from power cables; try a ground loop isolator if necessary.

7. Specifications

Parameter Value
Model Number GAX-EQ215S
Input Impedance 22K Ω
Output Impedance 200 Ω
Frequency Response 20Hz~20KHz ± 1dB
Balanced Segments Dual 15 segments
Balanced Gain ±12dB / ±12dB (Range switchable)
Total Resonant Wave Distortion 0.05% (1KHz)
Signal to Noise Ratio >90dB
Signal Control IN/OUT and LOW OUT
Working Voltage AC110V/AC220V (50-60Hz)
Power 12W
Max Level +23dBu
Connectors 1/4" Phone Jack (TRS), XLR Output
Min Load Impedance 200Ω
Dimension (L x W x H) 48 x 10.5 x 4.5 cm
Single Gross Weight 2.700 kg

8. User Tips

  • Start Flat: When beginning to equalize, always start with all sliders at the 0dB (center) position. This provides a neutral starting point.
  • Subtractive EQ: Often, it's more effective to cut (reduce) problematic frequencies rather than boost others. This can help maintain headroom and reduce noise.
  • Listen Carefully: Make small adjustments and listen to the overall impact on the sound. Avoid extreme settings unless absolutely necessary.
  • Room Acoustics: Use the equalizer to compensate for deficiencies in your listening environment, such as excessive bass or harsh treble.
  • Dependability: Users have noted this equalizer is simple to use and very dependable, making it a solid choice for consistent performance.

9. Warranty and Support

The Recordio GAX-EQ215S Graphic Equalizer comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or warranty inquiries, please contact Recordio customer service through your retailer or the official Recordio website.

Important: Do not attempt to disassemble or repair the unit yourself, as this will void the warranty. Any unauthorized tampering may also pose a risk of electric shock.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.