1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Xprinter XP-Q90EC 58MM Auto-cutter Thermal Receipt/Bill Printer. This high-speed thermal printer is designed for efficient receipt and bill printing, featuring an auto-cutter and multiple interface options including USB, Ethernet, and Bluetooth.

2. Package Contents
Please check the contents of your package upon unboxing. The standard package should include the following items:
- Printer: 1 pcs
- Data Cable: 1 pcs
- Power Adapter: 1 pcs
- Power Cord: 1 pcs
- Test Paper Roll: 1 pcs
- English Manual: 1 pcs

3. Setup
3.1. Connecting the Printer
Follow these steps to connect your printer:
- Connect the AC power cord to the power adapter.
- Connect the DC power cord from the adapter to the printer's power input.
- Connect the printer to your computer or tablet using the appropriate data cable (USB, Ethernet).
- If applicable, connect a cash drawer to the printer's cash drawer output port.

3.2. Loading Paper Roll
The printer uses 58mm thermal paper rolls. The recommended outside diameter of the paper roll is 60mm.
- Open the top cover of the printer.
- Drop the paper roll into the paper compartment.
- Pull the leading edge of the paper through the paper holder.
- Close the top cover firmly.
- Perform a self-test print (see Section 4.2) to ensure the paper is correctly installed.

3.3. Driver Installation
To use the printer with a computer, you may need to install the appropriate drivers. Drivers can be downloaded from the Xprinter website:
- Xprinter Website: www.xprinter.net
- Windows OS Driver: https://www.xprinter.net/companyfile/41.html
- Linux OS Driver: https://www.xprinter.net/companyfile/46.html
- For Mac systems, please contact Xprinter support for driver assistance.
Note on Bluetooth: Bluetooth connectivity is primarily for mobile POS applications and does not support direct connection to a PC via Bluetooth.
4. Operating Instructions
4.1. Button Functions and Indicator Lights
- FEED button: Press to manually feed paper.
- Paper indicator (LED light): A blue and red light indicates a lack of paper. No light means everything is normal.
- Power indicator: Light is on when the printer is connected to power properly.
- Error button: This indicator twinkles when there is an out-of-paper condition, cutter error, or printing head overheat.
4.2. Self-Test
To perform a self-test and print printer settings:
- Ensure the printer is connected to power.
- Turn off the printer.
- Press and hold the FEED button.
- Turn on the printer while still holding the FEED button.
- After approximately 2 seconds, release the FEED button. A completed self-test printout will be generated.
4.3. Hexadecimal Mode
To enter hexadecimal dump mode:
- Ensure the printer is connected to power.
- Press and hold the FEED button.
- Turn on the printer while still holding the FEED button.
- Continue holding the FEED button for approximately 10 seconds.
- Release the FEED button. The printer will print "Hexadecimal Dump" on the paper, indicating it has entered this mode.
4.4. Printing via Port Directly
For direct printing without driver installation, you can choose the appropriate port (USB, LAN, Serial, Parallel) in your software. The printer integrates ESC/POS commands directly for control.
5. Maintenance
5.1. Cutter Stuck Maintenance
If the auto-cutter becomes stuck:
- Turn off the printer and then restart it.
- If the issue persists, gently turn the gear on the printing head to return the cutter to its original position.
Note: To avoid damage to the printing head and automatic paper cutter, do not open the cutter and mechanism violently.
5.2. Cleaning Print Head
Clean the print head if you observe any of the following:
- Printing is not clear.
- Any vertical column is not clear.
- Paper feeds noisily.
Print head cleaning steps:
- Turn off the printer, release the power cord, and open the top cover. Remove the paper roll.
- Wait for the printing head to cool down if it has just finished printing.
- Clean the printing head completely using a swab moistened with alcohol (without water).
- Wait until the alcohol has completely volatilized, then close the top cover.
- Connect the power cord again and print a self-test to check if the print quality has improved.
Important Notices for Cleaning:
- Always ensure the printer is powered off when performing maintenance.
- Do not touch or scratch the printing head surface, roller, and sensors.
- Avoid using gas, acetone, or other organic solvents.
- Wait until alcohol is completely volatilized before closing the cover and reconnecting power.
6. Troubleshooting
- Printer not responding: Check power connections, data cable connections, and ensure the printer is turned on. Perform a self-test.
- Poor print quality (faint, unclear, missing lines): Clean the print head as described in Section 5.2. Ensure you are using high-quality thermal paper.
- Paper jam or cutter error: Refer to Section 5.1 for cutter maintenance. Check for any obstructions in the paper path. The Error LED will twinkle.
- Paper not feeding: Check if the paper roll is installed correctly and if there is enough paper. Press the FEED button to manually feed.
- Driver issues: Ensure the correct driver for your operating system is installed from the official Xprinter website.
7. Specifications
| Feature | Specification |
|---|---|
| Printing method | Direct line thermal |
| Print width | 48 mm |
| Print density | 384 points / line |
| Printing speed | 120 mm / S |
| Print paper width | 57.5 ± 0.5 mm |
| Outside diameter of printing paper | 60 mm |
| Print paper thickness | 0.06 ~ 0.08 mm |
| Row spacing | 3.75 mm |
| Interface | USB / USB + LAN / USB + Bluetooth |
| Character size | ANK character, font A: 1.5 * 3.0mm; Simple / traditional: 3.0 * 3.0mm |
| Extended character table | PC347 (Standard Europe), Katakana, PC850 (Multilingual), PC860 (Portuguese), PC863 (Canadian-French), PC865 (Nordic), West Europe, Greek, Hebrew, East Europe, Iran, WPC1252, PC866 (Cyrillic#2), PC852 (Latin2), PC858, IranII, Latvian, Arabic, PT151 (1251) |
| Barcode Type | UPC-A/UPC-E/JAN13 (EAN13)/JAN8 (EAN8)/CODE39/ITF/CODABAR/CODE93/CODE128 |
| Input buffer | 128KB |
| NV flash buffer | 4MB |
| Power adapter | DC 12V 2.6A |
| Cash drawer output | DC 12V/1A |
| Net weight | 0.8kg |
| Product dimension (L×W×H) | 169.95 × 120 × 119.92mm |
| Work environment | Temperature: 0 ~ 45 ℃, humidity: 10 ~ 80% |
| Storage environment | Temperature: -10 ~ 60 ℃, humidity: 10 ~ 90% |
| Operating environment | Windows/Linux/Android/iOS |
| Print command | Compatible with ESC / POS commands |
| Print head life | 50km |

8. User Tips
- Connectivity: While the printer offers Bluetooth, remember it's primarily for mobile POS applications and does not support direct Bluetooth connection to a PC. For PC connections, use USB or Ethernet.
- Print Quality: If printouts appear faded or unclear, a simple cleaning of the print head often resolves the issue. Always ensure the printer is off before cleaning.
- Paper Type: Always use thermal paper for this printer. Using incorrect paper will result in blank prints.
9. Warranty and Support
The Xprinter XP-Q90EC printer comes with National Joint Guarantees for after-sale service. For specific warranty details, service requests, or technical support, please refer to the official Xprinter website or contact your local distributor.
A comprehensive user manual in PDF format is also available for download: Xprinter XP-Q90EC User Manual (PDF)