NOYAFA CCTV IPC Tester NF-IPC716ADHS PRO User Manual

1. Introduction and Overview

The NOYAFA NF-IPC716ADHS PRO is a 7-inch IPS touch screen IP camera tester designed for the maintenance and installation of IP, analog, and HD coaxial cameras, as well as other security equipment. Its 1280x800 resolution allows for high-resolution display of network HD and analog cameras. This versatile unit supports various ONVIF PTZ and analog PTZ controls, and includes additional functions such as TDR cable testing, digital multi-meter capabilities, UTP cable testing, and cable scanning. By consolidating multiple testing tools into one device, the NF-IPC716ADHS PRO enhances safety and productivity for CCTV installers.

Typical Applications:

• CCTV system installation and maintenance
• Network cabling project installation and maintenance
• Dome camera, IP TVI CVI AHD SDI 8K H.265 camera testing
• Video transmission channel testing
• PTZ controller operations

2. Key Features

• Display: 7-inch IPS touch screen with 1280x800 resolution.
• Video Decoding: Supports 8K H.265 video display via mainstream.
• Camera Compatibility: Tests 8MP CVI/TVI/AHD/EX-SDI, HD-SDI, and 3G-SDI cameras.
• IP Camera Support: Compatible with ONVIF, Dahua, Hikvision, Axis, and other IP cameras.
• HDMI: HDMI input 4K 30FPS, HDMI output 4K 60FPS.
• VGA: VGA input supports 1920x1080P.
• Power Output: DC24V 2A, DC12V 3A, and 48V PoE power output (max 30W).
• Network: Features brand new dual gigabit Ethernet ports.
• Cable Testing: Includes UTP cable test, RJ45 cable TDR test, and cable quality test.
• Remote Control: TesterPlay function supports remote control and voice intercom.
• Usability: Backlight buttons for easier operation in low-light conditions.

3. Package Contents

Please verify that all items listed below are included in your package:

• NOYAFA NF-IPC716ADHS PRO Tester Unit
• Network Cable Tester
• DC12V 2A Power Adapter
• 8GB SD Card
• Polymer Lithium-ion Battery (7.6V DC 7800mAh) - Pre-installed
• Color Box / Tool Bag
• DC Power Cable
• BNC Cable
• RS485 Cable
• Audio Cable
• Safety Cord
• SC, ST Connector
• Multi-meter Test Leads (one pair of red and black)
• TDR Alligator Clip
• User Manual

4. Setup Guide

4.1 Initial Charging

Before first use, fully charge the device using the provided DC12V 2A power adapter. The built-in 7.6V 7800mAh lithium polymer battery takes approximately 3.5 hours for a fast charge, providing up to 16 hours of normal working time.

4.2 Powering On/Off

• Power On: Press and hold the power button (usually located on the side or top panel) until the screen illuminates.
• Power Off: Press and hold the power button until a shutdown prompt appears, then confirm.

4.3 Connecting Cameras

The IPC Tester offers various ports for different camera types. Refer to the port diagrams for correct connections.

4.3.1 Coaxial HD Cameras (CVI, TVI, AHD)

Connect your CVI, TVI, or AHD camera to the 'AHD CVI TVI CVBS IN' port using a BNC cable. The tester supports resolutions up to 8MP. For camera OSD menu control, ensure the coaxial cable is properly connected.

4.3.2 IP Cameras

Connect the IP camera to one of the 'LAN' ports (LAN1 or LAN2) using an Ethernet cable. If the camera supports PoE, you can power it directly from the tester using the 'PSE IN' port. Navigate to the 'IP Camera Test' application on the main screen.

4.3.3 HDMI Input

Connect an HDMI source (e.g., NVR, DVR) to the 'HDMI IN' port to view its output on the tester's screen. The tester supports 4K 30FPS HDMI input.

5. Operating Instructions

5.1 Main Interface Navigation

The tester features a touch screen interface with various application icons. Tap on an icon to launch the corresponding function.

5.2 IP Camera Test

Select 'IP Camera Test' from the main menu. This application allows you to:

• IP Discovery: Scan the network for IP cameras.
• ONVIF Test: Connect and control ONVIF-compliant cameras.
• Specific Protocols: Test cameras using Dahua, Hikvision, Axis, and other proprietary protocols.
• PoE Power Output: Provide power to PoE cameras directly from the tester.
• Video Display: View live video streams, take snapshots, record, and playback footage.
• PTZ Control: Control camera pan, tilt, and zoom functions.

5.3 CVBS & HD Camera Test

Select 'CVBS & HD Camera' from the main menu. This function supports:

• Analog (CVBS) Test: Connect and test traditional analog cameras.
• HD Coaxial Test: Test CVI, TVI, AHD, EX-SDI, HD-SDI, and 3G-SDI cameras up to 8MP resolution.
• Coaxial OSD Menu: Access and control the camera's On-Screen Display menu via coaxial cable.
• Snapshot & Record: Capture images and record video from connected cameras.

5.4 Cable Tester

Select 'Cable Tester' to perform various cable diagnostics.

• UTP Cable Test: Check the continuity and wiring sequence of UTP cables.
• RJ45 TDR Test: Measure cable length and identify fault locations in RJ45 cables.
• Cable Quality Test: Assess the overall quality and performance of network cables.

5.5 Other Tools and Functions

The 'Tools' application provides access to additional utilities:

• Digital Multimeter: For electrical measurements.
• Optical Power Meter: To measure optical fiber power.
• Red Light Source: For visual fault location in fiber optic cables.
• TDR Cable Fault Location: Advanced cable fault detection.
• Coaxial HD Level Test: Measures signal levels for coaxial HD systems.
• Line Finder: Helps locate cables in bundles.
• Media Player: Play recorded video files.
• Update: For system software updates.

6. Maintenance

• Battery Care: To prolong battery life, avoid fully discharging the device frequently. Recharge when the battery level is low. If storing for extended periods, charge the battery to about 50% and store in a cool, dry place.
• Cleaning: Use a soft, dry cloth to clean the screen and exterior. Do not use abrasive cleaners or solvents. For stubborn dirt, a slightly damp cloth can be used, ensuring no moisture enters the ports.
• Storage: Store the device in its protective tool bag when not in use to prevent damage from dust, impacts, and extreme temperatures.
• Software Updates: Regularly check for and install software updates to ensure optimal performance and access to new features.

7. Troubleshooting

7.1 No Video Signal on Screen

• Check Connections: Ensure all video cables (BNC, HDMI, Ethernet) are securely connected to the correct input/output ports on both the tester and the camera/source.
• Power Supply: Verify that the camera/source is powered on. If using PoE, ensure the PoE function is enabled on the tester and the camera is PoE compatible.
• Camera Settings: Confirm the camera's video output format (e.g., AHD, TVI, CVI, IP) matches the selected test mode on the tester.
• Resolution Compatibility: While the tester supports high resolutions, ensure the camera's output resolution is within the tester's supported range for the specific input type.
• Cable Integrity: Use the 'Cable Tester' function to check for faults in video or network cables.

7.2 Network Connectivity Issues

• Ethernet Cable: Ensure the Ethernet cable is properly connected to the 'LAN' port. Check cable integrity with the 'Cable Tester'.
• IP Address: Verify the IP address settings of the tester and the IP camera are compatible (e.g., in the same subnet). Use the IP Discovery tool.
• Network Configuration: If connecting to a network, ensure DHCP is enabled or static IP settings are correctly configured.

7.3 Cable Test Failures

• Correct Cable Type: Ensure you have selected the correct cable test mode (e.g., UTP, TDR).
• Proper Connection: For UTP tests, ensure both ends of the cable are correctly inserted into the main unit and the remote unit (if applicable).
• Cable Damage: The test results will indicate if there are open circuits, short circuits, or miswires. Replace damaged cables.

7.4 Device Not Responding / Freezing

• Soft Reset: Press and hold the power button for about 10 seconds to force a restart.
• Factory Reset: If issues persist, a factory reset might be necessary (refer to the 'Settings' menu). Note that this will erase all user data and settings.

8. Specifications

9. User Tips

• Keep Software Updated: Regularly check for firmware updates to ensure compatibility with the latest camera technologies and to benefit from performance improvements.
• Use Correct Cables: Always use high-quality, appropriate cables for each connection type (BNC for coaxial, Ethernet for IP, HDMI for video input/output) to avoid signal loss or incorrect readings.
• Battery Management: For prolonged field use, consider carrying a portable power bank or spare battery if available, especially for long testing sessions or when using power-intensive functions like PoE output.
• Screen Protection: Utilize a screen protector to prevent scratches on the touch screen, which is crucial for clear viewing and accurate touch input.
• Familiarize with Menus: Spend some time navigating through the different applications and settings to become proficient with the device's capabilities before critical field work.

10. Warranty and Support

NOYAFA products are designed for reliability and performance. This product is certified original, ensuring quality and authenticity.

For technical support, service, or warranty inquiries, please contact NOYAFA customer service or your authorized dealer. Please have your product model and serial number ready when contacting support.