1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Atermiter X99 D4 Motherboard. Designed to support LGA2011-3 Intel Xeon E5 V3/V4 processors and DDR4 REG ECC memory, this motherboard offers robust performance for various computing scenarios including gaming, audio/video production, office work, and server applications.
2. Safety Information
- Static Electricity: Always handle the motherboard and components on an anti-static mat and wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage.
- Power Supply: A powerful power supply is required for this platform. Ensure your power supply is at least 500W from a reputable brand to ensure stable operation.
- Handling: Inspect the motherboard immediately upon receipt. Do not install the motherboard into a computer case if any damage is observed, as installation in the case is considered artificial damage and may affect warranty claims.
- Battery Removal: The CR2032 battery for the CMOS will be removed from the motherboard before shipping due to shipping regulations. You will need to install a new CR2032 battery upon receipt.
3. Package Contents
Verify that all items are present in your package:
- Atermiter X99 D4 Motherboard
- I/O Shield
- SATA Cable
- CPU Cooler Mounting Bracket and Screws
Figure 1: Motherboard and Included Accessories
4. Product Overview
Familiarize yourself with the layout and components of the Atermiter X99 D4 Motherboard:
Figure 2: Motherboard Component Layout
- CPU Socket: LGA 2011-3 for Intel Xeon E5 V3/V4 processors.
- DDR4 RAM Slots: Four slots supporting up to 64GB (4x16GB) of DDR4 2133/2400/2666MHz non-ECC, REG ECC, or ECC memory.
- PCIe x16 Slot: For graphics cards.
- NVME M.2 Slots: For high-speed NVME SSDs.
- SATA Ports: Four SATA ports for traditional storage devices.
- USB 3.0 Ports: High-speed USB connectivity.
- USB 2.0 Ports: Standard USB connectivity.
- Audio Interface: 3 x Audio Jacks for 2.1 channel audio.
- Gigabit Ethernet: 1x RJ45 port for network connection.
- PS/2 Combo Port: For legacy keyboard/mouse.
- Power Connectors: 24-pin Main Power Connector and 4+4 Pin Power for CPU.
5. Specifications
| Feature | Specification |
|---|---|
| Brand Name | Atermiter |
| Socket Type | LGA 2011-3 |
| Application | Server |
| Chipset | Intel Others (Q87/Q85/Z87/H87/H81/B85, sent randomly) |
| CPU Compatibility | Intel Xeon E Series (V3, V4) |
| Form Factor | Micro-ATX, CeB |
| Maximum RAM Capacity | 64 GB |
| Memory Type Supported | DDR4 (non-ECC/REG ECC/ECC) |
| Number Of Memory Slots | 4 |
| Memory Channel | Double |
| PCI - E standards | PCI-E 3.0 |
| Number of PCIe x16 | 1 |
| Number of PCIe x1 | 1 |
| Number of M.2 | 1 |
| Number of SATA Ports | 4 |
| Storage Interface Type | SATA, SATA 3 |
| Back I/O Ports | 1x RJ45, PS/2 Combo, 3 x Audio Jacks |
| Ports | USB 3.0 |
| Support USB Type | USB 2.0, USB 3.0 |
| Max LAN Speed | 100Mbps |
| Audio Channels | 2.1 |
| RAID Supported | No |
| With CPU | No |
| Battery Included | No (CR2032 battery removed for shipping) |
| Quality Certification | CE |
6. Setup Guide
Follow these steps to assemble your computer system with the Atermiter X99 D4 Motherboard.
6.1. CPU Installation
- Carefully open the LGA 2011-3 CPU socket retention mechanism.
- Align the CPU with the socket, ensuring the gold triangle on the CPU matches the triangle on the socket.
- Gently place the CPU into the socket without forcing it.
- Close the retention mechanism to secure the CPU.
- Apply thermal paste to the CPU and install the CPU cooler.
6.2. Memory (RAM) Installation
The motherboard supports DDR4 memory. For optimal performance and stability, follow the recommended installation priority:
Figure 3: RAM Installation Priority
- All RAM should be installed in slot #1 and slot #4 (green slots) first.
- When using 1 RAM module: Install in slot #1 or slot #4.
- When using 2 RAM modules: Install in slot #1 and slot #4.
- When using 3 RAM modules: Install in slot #1, slot #4, and either slot #2 or slot #3.
- When using 4 RAM modules: Install in all slots (#1, #2, #3, #4).
- Important Note: The black RAM slots (#2 and #3) cannot function alone. Always populate green slots (#1 and #4) first.
6.3. Graphics Card Installation
- Locate the PCI-E X16 slot on the motherboard.
- Align your graphics card with the slot and press firmly until it clicks into place.
- Secure the graphics card with a screw to the computer case.
6.4. Storage Device Installation
- NVME M.2 SSD: Insert the M.2 SSD into the M.2 slot and secure it with the provided screw.
- SATA Drives: Connect your SATA SSDs or HDDs to the SATA ports using SATA data cables. Connect power from your power supply to the drives.
6.5. Power Connections
- Connect the 24-pin ATX power cable from your power supply to the main 24-pin power connector on the motherboard.
- Connect the 4+4 pin (8-pin) CPU power cable from your power supply to the CPU power connector near the CPU socket.
6.6. Initial Boot and OS Installation
After connecting all components, you can proceed with the initial boot and operating system installation. The following video demonstrates a system test and boot process:
Video 1: Motherboard CPU Memory Installation and Test
7. Operating Instructions
Once your system is assembled and the operating system is installed, you can begin using your computer. Ensure all drivers for your components are installed for optimal performance. Refer to your operating system's documentation for specific usage instructions.
8. Maintenance
- Cleaning: Regularly clean dust from your computer case and components using compressed air. Ensure the system is powered off and unplugged before cleaning.
- Handling: Always handle the motherboard by its edges. Avoid touching components or circuit traces directly.
- Water Stains: The motherboard is brand new, but it is possible to have minor water stains from the manufacturing process. This is normal and does not affect functionality.
Figure 4: Example of minor water stain on motherboard (normal)
9. Troubleshooting
- No Boot/No Display: Ensure all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected. Verify RAM modules are correctly seated in the recommended slots. Check that the graphics card is properly installed.
- Chipset Variation: Due to different production batches, the motherboard may come with various Intel chipsets (e.g., H81, B85, Q85, Q87, Z87, H87). This is normal and does not affect compatibility with the advertised CPU and memory types.
- Inaccurate Temperature Readings: The motherboard does not have a dedicated temperature control chip for software monitoring. Software-reported temperatures (e.g., 110°-120°C) are virtual readings. The actual temperature can be measured with a physical thermometer, and normal operating temperature should not exceed 50°C.
- LED Backlight: For improved stability, future versions of the motherboard may omit the LED backlight. This is a design change and not an indication of a fault.
Figure 5: Motherboard Testing Process
10. User Tips
- Memory Channels: This motherboard supports dual-channel memory configuration. When installing two RAM modules, ensure they are placed in slots #1 and #4 for optimal dual-channel performance.
- TPM 2.0: Based on available specifications, this motherboard does not explicitly support TPM 2.0. If TPM functionality is critical for your use case, please verify compatibility with the seller before purchase.
11. Warranty and Support
The Atermiter X99 D4 Motherboard comes with a 1-year warranty from the date of purchase. For any technical support, warranty claims, or further inquiries, please contact the seller directly through the platform where you made your purchase. Provide your order details and a clear description of the issue to facilitate a quick resolution.