1. Introduction
This manual provides comprehensive instructions for the Philips HX685T electric toothbrush host, designed as a replacement handle for the HX685 series. It covers essential information regarding its features, operation, maintenance, and specifications to ensure optimal performance and longevity of your device.
The package includes one (1) electric toothbrush host, which contains the circuit board and battery.
2. Product Features
- Adjustable Strength: Features three levels of brushing intensity.
- Multiple Modes: Offers three distinct brushing modes for varied dental needs:
- Cleaning Mode
- Brightening Mode
- Gum Care Mode
- Compatibility: Designed as a replacement handle for Philips HX685 series electric toothbrushes.
3. Setup
Before first use, ensure the toothbrush handle is fully charged. While the package includes the host with a battery, a separate charger (not included) may be required. Attach a compatible Philips HX685 series brush head (not included) firmly onto the metal shaft of the host.
4. Operating Instructions
- Prepare the Brush: Wet the brush head bristles and apply a small amount of toothpaste.
- Position the Brush: Place the brush head bristles on your teeth at a slight angle, ensuring they are aligned with your gum line.
- Start Brushing: Press the power button (usually the top button) to start the acoustic vibration toothbrush.
- Select Mode and Intensity: Use the second button (below the power button) to cycle through the available modes (Clean, White, Gum Care) and adjust the brushing intensity. The illuminated indicators on the handle will show the currently selected mode.
- Brush Your Teeth: Gently move the brush head slowly across all surfaces of your teeth in small, controlled motions. Allow the toothbrush to do most of the work.
- Finish Brushing: After brushing for the recommended duration (typically 2 minutes), press the power button again to turn off the toothbrush.
5. Maintenance
- After Each Use: Rinse the brush head thoroughly under running water. Wipe the handle with a damp cloth to remove any toothpaste residue.
- Regular Cleaning: Periodically clean the entire handle, especially around the buttons and the shaft, to prevent buildup. Do not submerge the handle in water for extended periods.
- Charging: Charge the toothbrush when the battery indicator shows low power. Ensure the charging base (if applicable, not included) is dry before placing the handle on it.
- Storage: Store the toothbrush in a dry place when not in use.
6. Troubleshooting
- Toothbrush not turning on: Ensure the battery is charged. If the issue persists, contact customer support.
- Reduced brushing power: This may indicate a low battery. Charge the toothbrush fully.
- Unusual noise or vibration: Check if the brush head is properly attached. If the problem continues, discontinue use and contact support.
7. Specifications
| Attribute | Detail |
|---|---|
| Product Type | Electric Toothbrush Parts |
| Model | HX685T (Suitable for HX685 series) |
| Origin | Mainland China (Manufactured in Indonesia) |
| High-concerned chemical | None |
| Package Length | 20 cm |
| Package Width | 12 cm |
| Package Height | 10 cm |
| Package Weight | 0.2 kg |
8. User Tips
- Authenticity: The handle is confirmed to be Philips branded, ensuring compatibility and quality within the HX685 series.
- Brush Head Compatibility: Always use genuine Philips Sonicare brush heads for the best performance and to avoid damage to the handle.
- Gentle Brushing: Electric toothbrushes are designed to clean effectively with minimal pressure. Avoid pressing too hard, as this can wear down bristles and potentially harm gums.
9. Warranty and Support
For any warranty claims, technical support, or inquiries regarding your Philips HX685T electric toothbrush host, please contact the original seller or Philips customer service directly. Keep your purchase receipt as proof of purchase.
