JIKONG JK BMS Active Balancer

Contents

JIKONG Smart JK BMS Active Balancer Instruction Manual

Models: B4A24S, B5A24S, B10A24S, B2A16S, B2A24S, B2A24S-CAN, B2A24S-485

1. Product Overview

The JIKONG Smart JK BMS Active Balancer is an advanced battery management system designed for 2-24 cell battery packs, including Li-ion, LiFePO4, and LTO types. It features active energy transfer balancing, ensuring cell voltage consistency with high precision. Integrated Bluetooth functionality allows for convenient monitoring and control via a mobile application on both Android and iOS devices.

This manual provides essential information for the safe and efficient operation of your JK BMS Active Balancer.

Video: Unboxing and initial connection overview of the JK Smart B10A24S Balancer.

2. Safety Information

Always observe the following safety precautions to prevent injury or damage to the device and battery pack:

  • Ensure all connections are correct and secure before powering on the device.
  • Do not short-circuit the battery terminals or balancer connections.
  • Operate within the specified voltage and temperature ranges.
  • Avoid exposing the device to moisture, extreme temperatures, or corrosive environments.
  • Only use with compatible battery types (Li-ion, LiFePO4, LTO).
  • If any abnormal behavior is observed, disconnect the device immediately.

3. Package Contents

Verify that all items are present in your package:

  • JK Smart Active Balancer Unit (e.g., B4A24S, B10A24S)
  • Balance Wires / Harnesses
  • Adapter Board (if applicable to your model)
  • User Manual (this document)
JK-B10A24S Full Set in case

Image: JK-B10A24S Full Set including the balancer unit, balance wires, and adapter board, neatly packed in a protective case.

4. Setup and Installation

Follow these steps carefully for proper installation:

4.1 Wiring Connections

  1. **Prepare the Battery Pack**: Ensure your battery pack is disconnected from any loads or chargers.
  2. **Connect Balance Wires**: Connect the balance wires to the corresponding cell terminals on your battery pack. Ensure the black line (B-) is connected to the negative terminal of the first cell, and subsequent wires are connected in sequence to the positive terminals of each cell (B1+, B2+, etc.).
  3. **Connect to Balancer Unit**: Insert the balance wire connectors into the designated ports on the JK BMS Active Balancer unit. Pay close attention to the orientation and ensure they are fully seated.
  4. **Power Supply**: The balancer can be self-powered by the battery pack (40-100V) or an external power supply within the specified range.
Connection Diagram for JK BMS

Image: Detailed connection diagram showing wiring for 24S, 20S, 17S, 13S, and a step-up module connection (3S sample). This diagram illustrates how to connect the balance wires to the battery cells and the balancer unit. Note the specific B- and B+ connections for different cell counts.

Application method of active equalization module

Image: Application method of active equalization module. Usage 1: Pull out the battery pack protection board cable that needs to be balanced, and use the adapter board to connect the active equalization module for temporary repair equalization. Steps include patch cord connection, converter connection, and equipment patch cord connection.

4.2 Adapter Board (if included)

If your package includes an adapter board, it is typically used for temporary repair equalization or specific wiring configurations. Refer to the diagram for correct connection:

Adapter board and its cables

Image: An adapter board with its associated cables, used for specific wiring configurations or temporary equalization.

5. Operating Instructions

5.1 Bluetooth APP Connection

The JK BMS features built-in Bluetooth for monitoring and control via a mobile application.

  1. **Download the APP**: Download the specified Bluetooth application for JK BMS from your mobile device's app store (Android/iOS).
  2. **Activate Bluetooth**: Ensure Bluetooth is enabled on your mobile device.
  3. **Connect to BMS**: Open the Bluetooth application, search for the relevant serial number of your BMS, and connect.
  4. **Monitor Status**: Once connected, you can monitor cell voltages, balancing current, battery pack status, and other parameters in real-time.
Mobile APP interface for JK BMS

Image: Screenshot of the mobile APP interface showing real-time battery cell voltage, balance current, and other parameters. Available in both English and Chinese versions.

5.2 Active Balancing Principle

The JK BMS uses an active energy transfer equalization technology. This means it actively moves energy from higher voltage cells to lower voltage cells, ensuring all cells are balanced efficiently, whether the battery is charging, discharging, or in standby mode. This process helps prolong battery life and optimize performance.

Diagram illustrating JK BMS active balance principle

Image: Diagram illustrating the active balancing principle. Energy is transferred between cells to maintain a safe voltage range, ensuring all cells are fully charged or discharged evenly.

6. Specifications

Key technical specifications for the JIKONG Smart JK BMS Active Balancer:

FeatureSpecification
Model NumbersJK BALANCER (B1A16S, B2A16S, B1A24S, B2A24S, BA524S, B10A24S)
Accessory TypeBattery Accessories
CertificationCE
Equalizing Current1A/2A/5A/10A (set independently within 0.1-1A range)
Strings Supported2~16S, 2-24S
Balanced Cascade24S Supported (for more than 16 battery packs)
Other InterfacesCAN/RS485 Supported (Optional)
Power Supply Range40~100V
Power Supply ModeBattery pack self-powered or external power supply
Equalizing ModeNon-energy consumption, energy transfer active equalization technology
Cell Voltage Range1V ~ 5V, Accuracy ± 5mV
Applicable Battery TypeLi-ion; LiFePO4; LTO
Communication FunctionBuilt-in Bt, support Android/IOS APP
Working Temperature-20°C~70°C
Power ConsumptionBalanced state 10mA@100V, Unbalanced state 6mA@100V
Product Size (B4A24S)Front: 15.5*12.8*2.4cm, Back extension spacer: 17.7*12.8*2.4cm
Net Weight (B4A24S)549g
Product Size (B2A24S)Front: 13.5*9.9*1.9cm, Back extension spacer: 15.8*9.9*1.9cm
Net Weight (B2A24S)371g
Dimensions and weights for B4A24S and B2A24S models

Image: Comparison of B4A24S and B2A24S models, showing their dimensions and net weights.

7. Protection Features

The JK BMS Active Balancer incorporates multiple security protections to safeguard your battery pack:

  • **Over Charge Protection**: Prevents over-charging, extending battery life.
  • **Short Circuit Protection**: Automatic protection in case of a short circuit.
  • **Over Discharge Protection**: Prevents the battery from running out completely.
  • **Over Current Protection**: Prevents current from exceeding the battery's safe range.
  • **All-in Protection**: Prevents cable drop or poor contact.
  • **Over Temperature Protection**: Prevents the battery from overheating.
Six Security Protection features diagram

Image: Diagram illustrating the six security protection features of the JK BMS: Over charge, Short circuit, Over discharge, Over current, All-in (cable drop/poor contact), and Over temperature protection.

8. Troubleshooting

  • **Connection Issues**: If the device does not power on or connect via Bluetooth, double-check all wiring connections. The "Balan-Wire resistance detection" feature can help identify wiring errors.
  • **Balancing Not Occurring**: Verify that the battery pack voltage is within the operating range (40-100V). Check the APP for any error messages or abnormal cell voltages.
  • **APP Connectivity**: Ensure your mobile device's Bluetooth is on and the APP has necessary permissions. Try restarting the APP and the BMS unit.

9. User Tips

  • **APP Compatibility**: The JK BMS APP supports both Android and iOS systems. Ensure you download the correct version for your device.
  • **Wiring Verification**: Before initial power-up, always perform a thorough check of all balance wire connections to prevent damage. The "Balan-Wire resistance detection" feature is crucial for this.
  • **Monitoring**: Regularly check the cell voltages and overall battery health through the mobile APP to ensure optimal performance and early detection of any issues.

10. Maintenance

The JK BMS Active Balancer is designed for low maintenance. Follow these guidelines:

  • **Keep Clean**: Keep the unit free from dust and debris. Use a soft, dry cloth for cleaning.
  • **Environmental Conditions**: Store and operate the device within the specified temperature range (-20°C to 70°C) and avoid high humidity.
  • **Connection Integrity**: Periodically inspect all wiring and connectors for signs of wear, corrosion, or loose connections.

11. Warranty and Support

This product is manufactured by JIKONG and comes with a CE certification, ensuring quality and compliance. Each product is tested and guaranteed to be brand new and authentic.

For technical support or inquiries, please contact the seller or manufacturer directly. Contact information may be available on the product packaging or through your purchase platform.

JIKONG Smart BMS Balancer with branding

Image: JIKONG Smart BMS Balancer unit, showcasing the product branding and design.

Manufacturer/Seller Contact: Zhengzhou Youzai Youqu E-commerce Technology Co., Ltd.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.