lilygo T-PCIE-SIM

Contents

LILYGO® TTGO T-PCIE A7670X 4G ESP32-WROVER-B Development Board User Manual

Comprehensive guide for setup, operation, and maintenance of your LILYGO T-PCIE A7670X module.

1. Introduction

The LILYGO® TTGO T-PCIE A7670X is a versatile development board module designed for a wide range of applications, including mobile computing, IoT devices, and remote information processing. It integrates the ESP32-WROVER-B master chip with a PCIE-A7670X SIM module, offering robust 4G LTE Cat 1 connectivity alongside Wi-Fi and Bluetooth capabilities.

The A7670X module supports multiple frequency bands, including LTE-FDD, LTE-TDD, and GSM, making it adaptable to various global regions. This product is intended for verification test experiments and development purposes. Users must ensure compliance with local wireless management regulations and select appropriate frequency bands for their region.

LILYGO T-PCIE A7670X module and development board combination

Figure 1: LILYGO T-PCIE A7670X module and development board combination.

2. Key Features

  • Master Chip: ESP32-WROVER-B for powerful processing.
  • Wireless Connectivity: Integrated Wi-Fi (802.11 b/g/n) and Bluetooth (V4.2 BR/EDR and BLE).
  • 4G LTE Cat 1 Module: Supports LTE-FDD, LTE-TDD, and GSM networks.
  • Global Navigation Satellite System (GNSS): Optional BeiDou/GPS/GLONASS support for A7670E variant.
  • Extensive Protocol Support: TCP/IP, IPv4/IPv6, Multi-PDP, FTP/FTPS, HTTP/HTTPS, DNS.
  • Broad OS Compatibility: USB drivers for Microsoft Windows 7/8/10, Linux, and Android.
  • Software Features: Supports TLS/File System/LBS/FOTA/WWAN (RNDIS)/ECM.
  • Android RIL Support: Compatible with Android versions 5.0 through 9.0.
  • Modular Design: Compatible with LILYGO T-PCIE, T-Internet-COM, and T-SIMCAM development boards.

3. Specifications

3.1. T-PCIE Development Board Parameters

ParameterValue
MCUESP32-WROVER-E
Clock Speed240MHz
Flash4/16MB
AntennaOn-board
PSRAM8MB
Wireless ConnectivityWi-Fi: 802.11 b/g/n, Bluetooth: V4.2 BR/EDR and BLE
Peripheral InterfacesI2C/SPI/UART/SDIO/I2S/CAN

3.2. PCIE-A7670X Module Parameters

ParameterValue
GNSS (Optional)BeiDou/GPS/GLONASS
Dimensions (mm)24*24*2.6
Supply Voltage (V)3.4-4.2
SIM Card1.8V/3.0V
InterfacesSIM Card/UART/USB/ADC/GPIO/I2C

3.3. Software Features

FeatureDetails
ProtocolTCP/IP, IPv4/IPv6, Multi-PDP, FTP/FTPS, HTTP/HTTPS, DNS
USB DriverMicrosoft Windows 7/8/10, Linux, Android
SupportTLS/File System/LBS/FOTA/WWAN (RNDIS)/ECM
Android RILAndroid 5.0/6.0/7.0/8.0/9.0

3.4. Power Consumption & Data Transfer

CategoryParameterValue
Power Consumption (mA)LTE(mA)3.8
GSM(mA)3.5
Data TransferLTE(Mbps)10(DL)/5(UL)
GPRS/EDGE(Kbps)236.8(DL)/236.8(UL)

3.5. Frequency Band Reference

The A7670X module comes in different regional variants with specific frequency band support:

ProductRegionFrequency Bands
LTE-FDDGSM
A7670EEurope, Southeast Asia, South AmericaB1/B3/B5/B7/B8/B20900/1800MHz
A7670SASouth America, New Zealand, AustraliaB1/B2/B3/B4/B5/B7/B8/B28/B66850/900/1800/1900MHz
Frequency Band Reference table for A7670E and A7670SA

Figure 2: Frequency Band Reference table for A7670E and A7670SA.

3.6. Physical Dimensions

  • Dimensions (WxHxD): 11 x 2.2 x 3.5 cm
  • Weight: 9g
Detailed dimensional drawing of the T-PCIE board

Figure 3: Detailed dimensional drawing of the T-PCIE board.

4. Package Contents

The contents of your package will vary depending on the specific option purchased:

4.1. T-PCIE 4/16MB Option (4.0H)

  • 1 x T-PCIE Board (SIM module not included)
  • 1 x Charging Cable
  • 2 x Pin Headers
Shipping list for T-PCIE 4/16MB Option (4.0H)

Figure 4: Contents of the T-PCIE 4/16MB Option (4.0H) package.

4.2. T-PCIE A7670E With GPS Option

  • 1 x PCIE A7608E-H Module (T-PCIE Board not included)
  • 1 x SIM Antenna
  • 1 x GPS Antenna
  • 2 x Screws
Shipping list for T-PCIE A7670E With GPS Option

Figure 5: Contents of the T-PCIE A7670E With GPS Option package.

4.3. T-PCIE A7608E/SA Without GPS Option

  • 1 x PCIE A7608SA-H Module (T-PCIE Board not included)
  • 1 x SIM Antenna
  • 2 x Screws
Shipping list for T-PCIE A7608E/SA Without GPS Option

Figure 6: Contents of the T-PCIE A7608E/SA Without GPS Option package.

5. Setup Instructions

5.1. Module Compatibility

The PCIE-A7670X module is specifically designed for use with LILYGO's T-PCIE, T-Internet-COM, and T-SIMCAM development boards. It is not recommended for use with other PCIE driver boards to ensure proper functionality and avoid potential damage.

Diagram illustrating the modularity of PCIE-SIM7600X with T-PCIE, T-Internet-COM, and T-SIMCAM boards

Figure 7: Modular compatibility with LILYGO development boards.

5.2. Installing the SIM Module

  1. Carefully align the PCIE-A7670X module with the corresponding PCIE slot on your LILYGO development board (e.g., T-PCIE board).
  2. Gently push the module into the slot until it is securely seated.
  3. If your package includes screws, use them to fasten the module to the development board for added stability.
  4. Insert your SIM card into the designated SIM card slot. Note that the TF card slot has been upgraded to a push-push mechanism for easier insertion and removal.
  5. Connect the SIM antenna to the appropriate connector on the A7670X module.
  6. If you have the A7670E variant and require GPS functionality, connect the GPS antenna to its designated connector.
  7. If using the T-PCIE board, connect the provided charging cable to the board and a power source.
Image showing the T-PCIE development board with a SIM module inserted, and a separate SIM module

Figure 8: SIM module installation on the T-PCIE development board.

5.3. Pin Map Reference

For detailed pin assignments and connections, refer to the T-PCIE A7670SA & E 4G LTE Cat 1 Pin Map diagram:

T-PCIE A7670SA & E 4G LTE Cat 1 Pin Map, showing GPIOs, power pins, and module connections

Figure 9: T-PCIE A7670SA & E 4G LTE Cat 1 Pin Map.

6. Operating Instructions

  1. Power On: Once the module is securely installed and powered, the development board should initialize.
  2. Connect to PC: Connect the development board to your computer using a USB cable.
  3. Driver Installation: Ensure that the necessary USB drivers are installed on your operating system (Windows, Linux, or Android). These drivers facilitate communication between your computer and the development board.
  4. Development Environment: Set up your preferred development environment (e.g., Arduino IDE, PlatformIO) and configure it for the ESP32-WROVER-B chip.
  5. Firmware Upload: Upload your custom firmware or example code to the development board.
  6. Network Configuration: Configure the A7670X module for network access using AT commands or a suitable library in your code. Ensure the selected frequency bands comply with local regulations.
  7. Testing: Test Wi-Fi, Bluetooth, and 4G LTE connectivity as per your application requirements.

For detailed programming guides, examples, and the latest firmware, please refer to the official LILYGO Github repository: https://github.com/Xinyuan-LilyGO/LilyGo-T-PCIE.

7. Maintenance

  • Cleaning: Keep the development board and module clean and free from dust and debris. Use a soft, dry brush or compressed air for cleaning. Avoid using liquids or solvents.
  • Storage: Store the module in a dry, cool environment, away from direct sunlight and extreme temperatures.
  • Handling: Handle the board with care to prevent physical damage to components, connectors, or antennas. Avoid static discharge by using appropriate ESD precautions.
  • Firmware Updates: Regularly check the official LILYGO Github repository for firmware updates. Keeping your firmware up-to-date can provide performance improvements, bug fixes, and new features.

8. Troubleshooting

  • Module Not Detected: Ensure the PCIE-A7670X module is correctly and firmly seated in its slot on the development board. Verify that the development board is powered on.
  • No Power/LEDs Off: Check the power supply connection. If using a charging cable, ensure it is properly connected and the power source is active.
  • USB Connectivity Issues: Confirm that the USB cable is functional and properly connected to both the board and your computer. Install or update the necessary USB drivers for your operating system.
  • Network Connection Failure:
    • Verify that the SIM card is correctly inserted and activated with a valid data plan.
    • Check the SIM antenna connection.
    • Ensure that the frequency bands configured in your firmware match the bands supported by your regional A7670X module variant and your local network provider. Refer to the Frequency Band Reference table in Section 3.5.
  • GPS Not Functioning (A7670E): Ensure the GPS antenna is securely connected. If GPS is still not working, verify that the firmware loaded onto your module has GPS functionality enabled. Consult the LILYGO Github repository for specific firmware versions or configuration instructions related to GPS.

9. User Tips

  • GPS Activation: For users of the A7670E module, if you encounter issues with GPS functionality, it's important to check if GPS is enabled within the firmware you are using. Some firmware versions might have GPS disabled by default. Refer to the official LILYGO Github for guidance on enabling or configuring GPS in your firmware.

10. Warranty and Support

For the most up-to-date documentation, technical resources, code examples, and community support, please visit the official LILYGO Github repository:

https://github.com/Xinyuan-LilyGO/LilyGo-T-PCIE

For product-specific inquiries, technical assistance, or to report issues, please contact the LILYGO Official Store customer service directly.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.