Hti GW256

Contents

GOYOJO GW256 Handheld Thermal Imager Instruction Manual

Model: GW256

1. Introduction

The GOYOJO GW256 is a high-resolution handheld thermal imager designed for various inspection and detection tasks. It features a 256x192 infrared resolution, a wide temperature measurement range, and multiple color palettes for clear thermal imaging. This manual provides essential information for the safe and effective use of your device.

2. Package Contents

  • GOYOJO GW256 Thermal Imager
  • Protective Pouch
  • USB Charging Cable (Micro USB)
  • Instruction Manual

3. Device Overview

The thermal imager is designed for comfortable handheld use, featuring an ergonomic grip and intuitive button layout.

GOYOJO GW256 Handheld Thermal Imager with key features highlighted
Figure 1: GOYOJO GW256 Handheld Thermal Imager with key features and specifications.

Key Features:

  • High/Low Temperature Alarm
  • PC Software Analysis Support
  • Photo & Video Capture
  • 3G Built-in Storage (4G eMMC, approx. 3G user available)
  • 256x192 Infrared Resolution
  • -20°C ~ 550°C Temperature Range
  • 25Hz Frame Rate
  • 56° x 42° Field of View
  • 2200mAh Rechargeable Battery
  • Auto Power-Off Functionality

4. Setup

4.1 Charging the Device

  1. Locate the Micro USB port on the side of the thermal imager.
  2. Connect the provided USB charging cable to the device and a compatible USB power adapter (not included) or computer.
  3. The device uses a dedicated removable rechargeable lithium battery with a capacity of 2200mAh.
  4. The device supports power configuration for 5 minutes / 20 minutes / no automatic shutdown, which can be adjusted in settings.

4.2 Initial Power On and Language Selection

  1. Press and hold the power button to turn on the device.
  2. Upon first use or after a reset, you may be prompted to select a language. The device supports English, Chinese, Italian, and German.
  3. Navigate using the arrow keys and confirm your selection with the 'Enter' button.

5. Operating Instructions

5.1 Basic Controls

  • Power Button: Press and hold to turn on/off. Short press for certain menu functions.
  • MENU Button: Access the main menu for settings and options.
  • SELECT Button: Used to select options within menus.
  • ENTER Button: Confirm selections or actions.
  • Arrow Keys (Up, Down, Left, Right): Navigate through menus and adjust settings.

5.2 Thermal Imaging Modes and Color Palettes

The GW256 supports various display modes and 6 thermal palettes to enhance visualization of temperature differences.

GOYOJO GW256 Thermal Imager displaying different color palettes
Figure 2: Available color palettes including White Hot, Black Hot, Rainbow, Ironbow, Red Hot, and Fusion.
  • Image Display Mode: Infrared, visible light, or dual light fusion.
  • Color Palettes: Rainbow, Ironbow, Red Hot, Cold Color, Black & White, White & Black. Select the palette that best highlights the temperature anomalies for your specific application.

5.3 Temperature Measurement

The device offers precise temperature measurement and tracking features.

  • Temperature Range: -20℃ to +550℃ (-4℉ to 1022℉).
  • Measurement Accuracy: ±2℃ or ±2% for -15℃ to 550℃; ±4℃ for -20℃ to -15℃.
  • Measurement Resolution: 0.1℃.
  • Measurement Mode: Center point, hot spot tracking, and cold spot tracking.
  • Emissivity Setting: Adjustable from 0.01 to 1.00 to ensure accurate readings for different materials.

5.4 Photo and Video Capture

Capture thermal images and videos for documentation and analysis.

  1. Point the thermal imager at the target area.
  2. Press the designated button (often 'Enter' or a dedicated capture button) to take a photo or start/stop video recording.
  3. Images are saved in JPG format and videos in MP4 format to the built-in 4G eMMC storage (approximately 3G user available).

5.5 Data Transfer and Analysis

Transfer captured data to a computer for further analysis using dedicated PC software.

  • Export Method: Connect the device to a computer via the Micro USB cable to export images and videos.
  • Offline Analysis: The device supports offline analysis using PC software, allowing for detailed examination of thermal data.

5.6 High/Low Temperature Alarm

The device can be configured to trigger an alarm when temperatures exceed or fall below predefined thresholds, aiding in quick detection of critical anomalies.

6. Maintenance

6.1 Battery Care

  • Ensure the device is fully charged before extended use.
  • Avoid completely draining the battery to prolong its lifespan.
  • Store the device with a partial charge if not used for long periods.

6.2 Cleaning

  • Use a soft, dry cloth to clean the device body.
  • For the lens and screen, use a specialized lens cleaning cloth and solution to avoid scratches.
  • Do not use abrasive cleaners or solvents.

6.3 Storage

  • Store the thermal imager in its protective pouch when not in use.
  • Keep the device in a dry environment with a storage temperature between -20℃ to +60℃.
  • Maintain relative humidity between 10% to 85%RH (non-condensing).

7. Troubleshooting

7.1 Device Not Powering On

  • Ensure the battery is sufficiently charged. Connect the device to a power source using the Micro USB cable and allow it to charge for at least 30 minutes before attempting to power on again.

7.2 Auto Shutdown

  • The device has an automatic shutdown feature to conserve battery. Check the power configuration settings to adjust the auto-shutdown time (5 minutes, 20 minutes, or no automatic shutdown).

7.3 Unclear Thermal Images

  • Ensure the lens is clean and free from dust or smudges.
  • Adjust the focus mode if available (GW256 features free focus).
  • Experiment with different color palettes to find the best contrast for your environment.

8. Specifications

FeatureSpecification
Infrared Detector TypeVanadium Oxide Uncooled Infrared Focal Plane
Infrared Resolution256x192
Infrared Response Band8 to 14μm
Cell Size12μm
NETD≤50mK @25℃, @F/1.1
Lens Focal Length3.2mm
IFOV3.75mrad
Field Angle56°×42°
Focus ModeFree focus
Temperature Measurement Range-20℃ to +550℃ (-4℉ to 1022℉)
Measurement Accuracy-15℃ to 550℃ ±2℃ or 2%; -20℃ to -15℃ ±4℃
Temperature Measurement Resolution0.1℃
Temperature Measurement ModeCenter point/hot and cold spot tracking
Color PaletteRainbow, iron oxide red, cold color, black & white, white & black
Emissivity SettingAdjustable from 0.01 to 1.00
Thermal Imaging Frame Rate≤25Hz
Visible Light Resolution640x480
Display Size3.2-inch (240x320)
Device StorageBuilt-in 4G eMMC (user available storage space is about 3G)
Storage Image/Video FormatJPG/MP4
Image/Video Export MethodUSB connection to computer export
Image Analysis FunctionSupport offline analysis on PC
Menu LanguageEnglish, Chinese, Italian, German
Battery TypeDedicated removable rechargeable lithium battery
Battery Capacity2200mAh
Working Time2 to 3 hours
Power InterfaceMicro USB
Power Configuration5 minutes / 20 minutes / no automatic shutdown
Work Temperature-10℃ to +50℃
Storage Temperature-20℃ to +60℃
Relative Humidity10% to 85%RH (non-condensing)
Product Weight389g
Product Size90mm×105mm×223mm
Is Smart DeviceNo
Power TypeCharger
StyleHandheld
CertificationCE, RoHS

9. User Tips

  • The device uses a Micro USB for charging, which is a common standard.
  • The GW256 offers a higher resolution (256x192) and features like auto-focus and multiple temperature points, providing better detail and functionality compared to some older, more expensive thermal imagers.
  • Utilize the various color palettes to optimize the visualization of temperature differences for specific inspection scenarios.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

11. Product Application Examples

The GOYOJO GW256 thermal imager is suitable for a wide range of applications, including:

Various applications of the thermal imager including electrical, boiler, HVAC, house maintenance, and circuit board inspections.
Figure 3: Wide range of applications for the thermal imager.
  • Electrical Inspections
  • Boiler Inspections
  • Electrical Power Monitoring
  • HVAC Inspections
  • House Maintenance (e.g., water pipe leak detection)
  • Circuit Board Inspections
  • Car Engine Overhaul
  • Transformer Room Line Maintenance
  • Air Conditioner Repair

12. Visual Demonstrations

Watch the official product video for a visual guide on unboxing, features, and comparison with other thermal imagers.

Video 1: Unboxing and comparison of the HTI thermal imager with other models, demonstrating its features and performance in various scenarios.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.