IRALAN SM-65

Contents

IRALAN Modern LED Ceiling Light

Model: SM-65 | Brand: IRALAN

Introduction

Thank you for purchasing the IRALAN Modern LED Ceiling Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.

Important Safety Instructions

  • Always turn off the main power supply at the circuit breaker before beginning any electrical work.
  • Installation should be performed by a qualified electrician or a competent person.
  • Ensure the mounting surface can support the weight of the fixture.
  • Do not connect the fixture to an ungrounded electrical system.
  • Do not attempt to modify the fixture in any way.
  • Keep packaging materials out of reach of children.
  • This fixture is designed for indoor use only.

Package Contents

Please check that all parts are present and undamaged before installation:

  • LED Ceiling Light Fixture (with integrated LED chips and acrylic lampshade)
  • Mounting Hardware (screws, wall anchors)
  • Remote Control
  • Instruction Manual (this document)

Note: Bulbs are integrated LED and are not included as separate items.

Specifications

FeatureDetail
Brand NameIRALAN
Model NumberSM-65
Item TypeChandeliers
Installation MethodAssembly
Installation TypeFlush Mount
Power SourceAC
Voltage90 - 260 V
Is DimmableYes
Switch TypeREMOTE CONTROL
Body MaterialAluminium Alloy
Shade TypeShadeless (Acrylic Lampshade)
Shade DirectionUp & Down
Luminous Flux2000-82000 LM (Varies by wattage)
Color Rendering Index (CRI)Up to 80
Color Temperature Range3000K (Warm White) - 6500K (Cool White)
Dimensions (Approx.)Diameter: 60cm, Height: 9cm
Power Consumption (Typical)40W or 50W (depending on model variant)
Applicable Area5-15 m²
Warranty3 years
CertificationCE

Note: Specific lumen output and wattage may vary slightly between different product variants (e.g., 40W model: 3600LM; 50W model: 4000LM).

Installation Guide

This fixture is designed for flush mount installation. Professional installation is recommended.

Components Overview

Diagram showing the components of the ceiling light: Metal Chassis, Acrylic Lampshade, and LED Light Strip.

Image: Key components of the IRALAN LED Ceiling Light. The metal chassis provides support and heat dissipation, the acrylic lampshade ensures bright and non-dazzling light, and the LED light strip consists of 192 LED chips.

General Installation Steps

  1. Prepare for Installation: Turn off power at the circuit breaker. Ensure the mounting surface is clean, dry, and structurally sound.
  2. Mount the Bracket: Attach the mounting bracket (part of the metal chassis) to the ceiling junction box using the provided screws. Ensure it is securely fastened.
  3. Electrical Connection: Connect the household electrical wires to the fixture's wires. Typically, connect live (black/brown) to live, neutral (white/blue) to neutral, and ground (green/yellow) to ground. Use wire nuts to secure connections.
  4. Secure the Fixture: Carefully lift the light fixture and align it with the mounting bracket. Secure the fixture to the bracket using the provided screws.
  5. Final Check: Ensure all connections are secure and the fixture is firmly attached to the ceiling. Restore power at the circuit breaker.

Always consult local electrical codes and a qualified electrician if you are unsure about any step.

Operating Instructions

Your IRALAN LED Ceiling Light is controlled via the included remote control.

Remote Control Functions

  • Power On/Off: Press the power button to turn the light on or off.
  • Brightness Adjustment (Dimming): Use the brightness control buttons (often marked with '+' and '-') to adjust the light intensity from 10% to 100%.
Diagram showing dimming brightness from 100% to 10% and color temperature range from 3000K to 6500K.

Image: Illustration of dimming capabilities and color temperature range. The light can be adjusted from 10% to 100% brightness and from 3000K (warm) to 6500K (cool).

  • Color Temperature Adjustment: Adjust the color temperature to suit your preference.
    • Warm Light (3000K): Creates a cozy and inviting atmosphere.
    • Neutral Light (4500K): Balanced light, suitable for general tasks.
    • White Light (6500K): Bright, cool light, ideal for focused activities.
Four panels showing different light effects: White Light (6500K), Neutral Light (4500K), Warm Light (3000K), and Light Off effect.

Image: Visual representation of the different color temperature settings: Warm (3000K), Neutral (4500K), and White (6500K), along with the light off state.

Pairing the Remote Control (if necessary)

If your remote control does not immediately operate the light, it may need to be paired. Typically, this involves:

  1. Ensure the light fixture is powered off at the wall switch.
  2. Turn the light on at the wall switch.
  3. Within 5 seconds of turning on the light, press and hold the "Pair" or "Setup" button on the remote control (refer to your specific remote's markings).
  4. The light fixture should blink or change color to indicate successful pairing.

Exact pairing procedures may vary. Consult the remote control's specific instructions if available.

Care and Maintenance

  • Cleaning: Always turn off the power before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or polishes as they may damage the finish or acrylic.
  • LED Longevity: The integrated LED chips are designed for long life and do not require replacement under normal use.
  • Inspection: Periodically check the fixture for any signs of damage or loose connections.

Troubleshooting

ProblemPossible Cause / Solution
Light does not turn on.
  • Check if the power supply is on at the circuit breaker and wall switch.
  • Ensure electrical connections are secure.
  • Verify the remote control batteries are working and correctly inserted.
  • Try re-pairing the remote control with the light fixture.
Remote control is not working.
  • Replace remote control batteries.
  • Ensure there are no obstructions between the remote and the light.
  • Re-pair the remote control with the light fixture.
Light flickers or dims unexpectedly.
  • Check for loose wiring connections.
  • Ensure the voltage supply is stable and within the specified range (90-260V).
  • If using a wall dimmer, ensure it is compatible with LED dimmable fixtures. (Note: This fixture is remote-controlled dimmable, not necessarily wall-dimmer compatible unless specified).
Light does not retain last setting (no memory function).
  • Some models may not have a memory function and will default to a specific setting (e.g., white light, 100% brightness) when powered off and on via a wall switch. Use the remote to set desired preferences after turning on.

User Tips

  • Optimize Lighting: Experiment with different color temperatures (3000K for relaxation, 4500K for general use, 6500K for task lighting) and brightness levels to find the perfect ambiance for any occasion.
  • Energy Efficiency: Utilize the dimming feature to reduce power consumption when full brightness is not required, extending the life of the LEDs and saving energy.
  • Placement: The fixture is suitable for areas between 5-15 square meters, making it ideal for bedrooms, dining rooms, and living rooms.

Warranty and Support

This IRALAN LED Ceiling Light comes with a 3-year warranty from the date of purchase, covering manufacturing defects and material faults under normal use.

For technical support, warranty claims, or any questions regarding your product, please contact your retailer or the manufacturer directly with your purchase details and model number (SM-65).

© 2023 IRALAN. All rights reserved.

This manual is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.