Lemorele G57

Contents

Lemorele G57 1080P HDMI Wireless Transmitter and Receiver User Manual

Model: G57 | Brand: Lemorele

1. Introduction

The Lemorele G57 is a 1080P HDMI Wireless Transmitter and Receiver kit designed to extend video signals wirelessly. This device is compatible with various display equipment such as TVs, monitors, and projectors that feature an HDMI interface. It supports both screen mirroring and projection modes for a seamless viewing experience.

Lemorele G57 Wireless HDMI Transmitter and Receiver units
Lemorele G57 Wireless HDMI Transmitter (TX) and Receiver (RX) units.

Key Features:

  • Supports Apple/Android mobile phones and personal computers for screen mirroring/projection without manual switching.
  • Offers a 'same screen' mode for synchronized display without requiring a router or data network.
  • Features a 'screen projection (push)' mode allowing users to exit the playback interface on the source device for other operations, without affecting the large screen display. This mode also conserves mobile phone data and power.
  • Delivers high-definition 1080P image quality with clear pictures and sharp details.
  • Supports DLNA (push) function.
  • Compatible with Google Chrome screen projection and Google Home App.
  • Equipped with 5G/2.4G dual-band WIFI for stable and fast video transmission, with easy WIFI networking setup via buttons.
  • Supports online firmware upgrades.

2. What's in the Box

Upon unboxing your Lemorele G57 kit, you should find the following components:

  • 1 x Lemorele Wireless HD Transmitter (TX)
  • 1 x Lemorele Wireless HD Receiver (RX)
  • 2 x USB Power Cables
  • 1 x HDMI Extension Cable (19.6 inches)
  • 1 x User Manual
Contents of the Lemorele G57 Wireless HD Transmitter & Receiver Kit
All components included in the Lemorele G57 package.

3. Setup Guide

The Lemorele G57 is designed for plug-and-play functionality, requiring no complex software installation or network configuration for basic operation.

3.1 Connection Diagram

The system consists of a Transmitter (TX) and a Receiver (RX). The TX unit connects to your source device, and the RX unit connects to your display device.

Connection diagram showing TX input from PC, Laptop, Camera, Set-top Box and RX output to TV Set, Monitor, Projector
TX Input sources and RX Output displays.

3.2 Step-by-Step Installation

  1. Connect the Transmitter (TX): Plug the TX unit into the HDMI output port of your source device (e.g., PC, laptop, camera, set-top box).
  2. Connect the Receiver (RX): Plug the RX unit into the HDMI input port of your display device (e.g., TV, monitor, projector).
  3. Power the Devices: Connect the provided USB power cables to both the TX and RX units, and then plug the other end into a USB power source (e.g., a USB port on your device, a USB wall adapter). Ensure both units receive stable power.
  4. Select Input Source: On your display device, select the correct HDMI input source to which the RX unit is connected.
  5. Automatic Connection: The TX and RX units should automatically pair and establish a wireless connection. The display from your source device should appear on your screen.
Laptop connected to TX unit, wirelessly displaying to a projector via RX unit, illustrating plug and play functionality with no setup required.
Plug and Play: Connect and display without complex setup.

4. Operating Instructions

4.1 Screen Mirroring (Same Screen Mode)

In this mode, the content on your source device's screen is directly mirrored onto the large display. This is ideal for presentations or sharing content in real-time. No router or internet connection is required for this basic mirroring functionality.

4.2 Screen Projection (Push Mode)

For compatible applications and devices (e.g., those supporting DLNA or Google Chrome screen projection), you can 'push' content to the large screen. Once the content is playing on the large screen, you can use your source device for other tasks, turn off its screen, or even disconnect it without interrupting the playback on the large display. This mode is efficient as it does not consume mobile phone data or power for the duration of the projection.

4.3 Multi-Transmitter Support

The Lemorele G57 system allows for multiple transmitters to be paired with a single receiver, enabling quick switching between different source devices. Up to 8 TX units can be paired with 1 RX unit.

Diagram showing 8 laptops (TX units) connected wirelessly to a single large display (RX unit), demonstrating multi-transmitter capability.
Multiple Transmitters (TX) can be paired with one Receiver (RX).

4.4 Wi-Fi Networking (for Advanced Features)

For features like DLNA, Google Chrome screen projection, or Google Home App integration, the device utilizes its 5G/2.4G dual-band Wi-Fi. You can set up Wi-Fi networking through the device's buttons, making it simpler than other similar devices.

4.5 Product Demonstration Video

A short video demonstrating the features and usage of the Lemorele G57 Wireless HDMI Transmitter and Receiver.

5. Maintenance

5.1 General Care

  • Keep the devices dry and away from extreme temperatures.
  • Clean the units with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
  • Ensure proper ventilation around the devices during operation.

5.2 Firmware Updates

The Lemorele G57 supports online upgrades. Periodically check for and install available firmware updates to ensure optimal performance and access to new features. Specific instructions for initiating an online upgrade will be provided through the device's interface or accompanying software, if applicable.

6. Troubleshooting

If you encounter issues with your Lemorele G57, please refer to the following common problems and solutions:

6.1 No Signal / Blank Screen

  • Check Connections: Ensure both the TX and RX units are securely plugged into their respective HDMI ports and are receiving power via the USB cables.
  • Correct Input Source: Verify that your display device is set to the correct HDMI input channel.
  • Power Cycle: Disconnect and reconnect power to both the TX and RX units, then restart your source device.
  • Compatibility: Confirm that your source device and display device are compatible with HDMI output/input.

6.2 Image/Audio Latency or Delay

  • Distance: Ensure the TX and RX units are within the recommended operating range (up to 50 meters / 164 feet).
  • Obstructions: Minimize physical obstructions (walls, furniture, etc.) between the TX and RX units, as these can degrade signal quality and increase latency.
  • Interference: Other wireless devices operating on similar frequencies (2.4GHz or 5GHz) can cause interference. Try to move other wireless devices away or change Wi-Fi channels if possible.

6.3 Wi-Fi Network Disconnection / Interference

  • Channel Conflict: If the device is causing your main Wi-Fi network to disconnect, it might be due to channel conflict. Try adjusting the Wi-Fi channel on your main router or the Lemorele G57 if the option is available.
  • Distance: Ensure the device is not too close to your main Wi-Fi router if experiencing interference.

6.4 Device Not Working with Specific Equipment (e.g., TV Box, Gaming Console)

  • HDMI Version: Some devices may have specific HDMI version requirements or HDCP restrictions. Check the specifications of your source device and ensure compatibility.
  • Power Requirements: Ensure the device is receiving sufficient power. Some source devices' USB ports may not provide enough power, requiring an external USB power adapter.

7. Specifications

FeatureSpecification
Model NumberG57
Brand NameLemorele
Item TypeTV stick
ConnectorsHDMI-Compatible
Resolution1080P (Full-HD)
Decode Ability1080P (Full-HD)
Wi-Fi Frequency5GHz (also supports 2.4GHz)
Wi-Fi Range / Transmission DistanceUp to 50m (164ft)
Antenna TypeInternal
FunctionMultiple-Input Single-Output (8 TXs to 1 RX)
CertificationCE, RoHS
Package Length27 cm
Package Width17 cm
Package Height4 cm
Package Weight0.247 kg

8. Warranty and Support

8.1 Warranty Information

The Lemorele G57 comes with a 1-year warranty from the date of purchase, covering manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

8.2 Customer Support

For any technical assistance, troubleshooting, or warranty inquiries, please contact Lemorele customer support. Solutions and detailed responses are typically provided within 24 hours on business days.

Warranty and Service information: 7 days return, 1 year warranty, shopping help with 24-hour response.
Warranty and Service details.

9. User Tips

  • Reduce Cable Clutter: This wireless extender is excellent for setups where you want to minimize cables, especially for projectors or wall-mounted TVs.
  • Portability: The compact design and potential for battery operation (if your source device provides sufficient power via USB) make it convenient for mobile presentations or temporary setups.
  • Check Device Compatibility: Before use, especially with non-standard devices like certain TV boxes or gaming consoles, verify their HDMI output compatibility to avoid issues.
  • Optimal Performance: For the best experience, ensure a clear line of sight between the transmitter and receiver, and keep them within the recommended operating distance.
  • Internet for Advanced Features: While direct screen mirroring doesn't require internet, features like DLNA, Google Chrome casting, or Google Home App integration will need an active internet connection.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.