Taidacent XKT-R03

Contents

Taidacent XKT-R03 Inductive Charging Receiver Chip User Manual

Model: XKT-R03

Brand: Taidacent

1. Introduction

The Taidacent XKT-R03 is a compact inductive charging receiver chip designed for wireless power transfer applications. This integrated circuit (IC) efficiently receives power wirelessly, converting it into a usable DC voltage and current for various electronic devices. Its small SOT23-6 package makes it suitable for space-constrained designs requiring a reliable wireless power reception solution.

Taidacent XKT-R03 Inductive Charging Receiver Chip

Figure 1: Taidacent XKT-R03 Inductive Charging Receiver Chip

2. Key Features

  • Dedicated wireless power reception capability
  • Compact SOT23-6 package for space-efficient designs
  • Maximum output current of 150mA
  • Maximum withstand voltage of 25V
  • Designed for integration into various electronic circuits

3. Specifications

ParameterValue
Model Numberwireless charge receiving chip (XKT-R03)
Accessory TypeCharger Accessories
Output Voltage and CurrentMax 25V, 0-150mA
Continuous Output Current1 to 150mA
Maximum Limit Current0.4A
Package TypeSOT23-6
Maximum Withstand Voltage25V
Charger IncludedNo
OriginMainland China

4. Setup and Integration

The XKT-R03 is a receiver chip designed for integration into a custom wireless power receiver circuit. It does not function as a standalone device. A typical setup involves several external components to form a complete wireless power reception system.

4.1 Basic Circuit Components

  • Receiving Coil (L1): This inductive coil couples with a transmitting coil to capture electromagnetic energy.
  • Rectifier Diode (D1): Converts the alternating current (AC) voltage induced in the receiving coil into pulsating direct current (DC).
  • Filter Capacitor (C1): Smooths the pulsating DC voltage from the rectifier, providing a more stable input to the XKT-R03 IC.
  • XKT-R03 IC: The core receiver chip, which regulates and outputs the received power.
  • Load/Battery (BT1): The electronic device or battery that will be powered or charged by the received energy.

4.2 Integration Guidance

Due to the nature of an IC, precise pinout and component values are critical for proper operation. Always refer to the official datasheet provided by Taidacent for the XKT-R03 for detailed pin configurations, recommended external component values, and example application circuits. General steps for integration include:

  1. Connect the receiving coil to the input of the rectifier circuit.
  2. Connect the output of the rectifier and filter capacitor to the appropriate input pins of the XKT-R03.
  3. Connect the ground pin of the XKT-R03 to the circuit's common ground.
  4. Connect the output pin(s) of the XKT-R03 to your intended load or battery charging circuit.
  5. Ensure all connections are secure and properly soldered to prevent intermittent operation or damage.

Warning: Incorrect wiring or exceeding maximum voltage/current ratings can damage the chip and connected components.

5. Operation

Once the XKT-R03 is correctly integrated into a functional wireless power receiver circuit, its operation is largely automatic. When the receiving coil is brought within the magnetic field generated by a compatible transmitting coil, the chip will begin to receive and process power. The regulated output will then supply the connected load or charge the battery.

5.1 Optimal Performance

  • Coil Alignment: For optimal power transfer efficiency, ensure proper alignment between the transmitting and receiving coils. Misalignment can significantly reduce the amount of power received.
  • Distance: Maintain an appropriate distance between the coils as specified by your overall wireless power system design. Excessive distance will reduce efficiency and output power.
  • Load Management: Ensure the connected load does not draw current exceeding the continuous output current of 150mA to prevent chip stress or damage.

6. Maintenance

As an integrated circuit, the XKT-R03 requires minimal maintenance. Adhering to good electronic design and handling practices will ensure its longevity and reliable performance.

  • Environmental Conditions: Ensure the operating environment is free from excessive moisture, dust, and corrosive substances.
  • Temperature: Operate the chip within its specified temperature range. Extreme temperatures can affect performance and lifespan.
  • Physical Handling: Avoid mechanical stress on the chip and its soldered connections during assembly, testing, and operation.
  • Cleaning: If cleaning is necessary, use appropriate electronic-grade cleaning solutions and methods. Avoid harsh chemicals or abrasive materials.

7. Troubleshooting

If you encounter issues with your XKT-R03 based wireless charging receiver circuit, consider the following troubleshooting steps:

7.1 No Power Output

  • Transmitter Check: Verify that the wireless power transmitting coil is powered on and functioning correctly.
  • Coil Alignment/Distance: Check the alignment and distance between the transmitting and receiving coils. Adjust for optimal coupling.
  • Circuit Connections: Inspect all circuit connections, including soldering points, for proper continuity and absence of short circuits.
  • Input Voltage: Measure the DC voltage at the input pins of the XKT-R03 (after rectification and filtering). Ensure it is within the chip's operational range.
  • Component Integrity: Test external components (coil, diode, capacitor) for proper functionality.

7.2 Low Power Output

  • Coil Optimization: Improve coil alignment and reduce the distance between the transmitting and receiving coils.
  • Impedance Mismatch: Check for any impedance mismatches in the receiving coil circuit that might reduce power transfer efficiency.
  • Load Current: Verify that the connected load current does not exceed the chip's continuous output current (150mA). High loads can cause voltage sag.

7.3 Overheating

  • Load Current: Ensure the load current does not exceed the maximum limit current (0.4A) or the continuous output current (150mA) for extended periods.
  • Short Circuits: Check for any short circuits in the output stage or connected load.
  • Input Voltage: Verify that the input voltage to the XKT-R03 does not exceed its maximum withstand voltage (25V).
  • Heat Dissipation: Ensure adequate heat dissipation for the chip, especially if operating at higher power levels or in enclosed spaces.

8. User Tips

  • Datasheet is Key: Always consult the complete manufacturer's datasheet for the XKT-R03 for detailed pinout diagrams, recommended application circuits, and specific operating parameters. This is crucial for successful integration.
  • Coil Design: For optimal performance, design your receiving coil and select associated components (rectifier, filter capacitor) to be compatible with the frequency and power characteristics of your chosen wireless power transmitter.
  • Protection Circuits: Consider incorporating additional overcurrent, overvoltage, and reverse polarity protection circuits into your design, especially when charging sensitive devices or batteries, to enhance overall system reliability and safety.
  • Testing: Thoroughly test your integrated circuit at various load conditions and coil alignments to ensure stable and efficient operation.

9. Warranty and Support

For detailed technical support, access to the latest datasheets, and information regarding product warranty, please contact Taidacent directly or refer to the official product page where this component was purchased. As an electronic component, warranty typically covers manufacturing defects under normal operating conditions. Please retain your purchase records for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.