1. Introduction
The Retroflag Classic 2.4G Controller-M is a versatile wireless gamepad designed for an authentic retro gaming experience with modern compatibility. It features a classic design with additional L, R, and SELECT buttons, offering both wireless 2.4G and wired connectivity options. This controller is compatible with a range of platforms including Nintendo Switch, Windows PCs, MD Mini/Mini 2 consoles, and Raspberry Pi.
Key features include a built-in rechargeable battery, turbo function, and button swapping capabilities to enhance your gaming sessions.
2. Package Contents
Please check the package for the following items:
- Retroflag Classic 2.4G Controller-M
- 2.4G USB Receiver
- USB Charging Cable
3. Specifications
| Feature | Detail |
|---|---|
| Model Number | Retroflag Classic 2.4G Controller-M |
| Size | 140 x 74 x 30 mm |
| Weight | 104 g |
| Input | 5V 500mA |
| Battery | 3.7V 480mAh (Rechargeable) |
| Interface Type | 2.4G Wireless / USB Wired |
| Compatible Platforms | Nintendo Switch, PC (Windows), Raspberry Pi, Mega Drive Mini / Mini 2 |
| Joystick Sensor Module | ALPS |
| Trigger Button Type | Non-Linear |
| Certification | CE, FCC, RoHS |
| Software Configuration Support | No |
4. Setup
4.1. Charging the Controller
Before first use, ensure the controller is fully charged. Connect the supplied USB charging cable to the USB-C port on the front of the controller and plug the other end into a USB power source (e.g., a computer USB port, USB wall adapter).
4.2. Wireless Connection (2.4G)
- Insert the 2.4G USB receiver into an available USB port on your compatible device (Nintendo Switch dock, PC, MD Mini/Mini 2, Raspberry Pi).
- Turn on the controller. The controller should automatically pair with the receiver. A successful connection is usually indicated by a solid LED light on both the controller and the receiver.
4.3. Wired Connection
To use the controller in wired mode, connect the USB charging cable directly from the controller's USB-C port to a USB port on your compatible device. The controller will function as a wired gamepad and will also charge simultaneously.
5. Operating Instructions
5.1. Basic Controls
The controller features a D-pad, A/B/C/X/Y/Z buttons, L/R shoulder buttons, and SELECT/START buttons, mimicking the classic Sega Genesis/Mega Drive layout with modern additions.
5.2. Button Mapping
The button functions may vary slightly depending on the platform. Refer to the table below for common mappings:
| Controller Button | Nintendo Switch | Windows | MD mini / mini 2 |
|---|---|---|---|
| A | A | A | A |
| B | B | B | B |
| C | R | RT | C |
| X | X | X | X |
| Y | Y | Y | Y |
| Z | L | RB | Z |
| L | ZL | LB | Z |
| R | ZR | LT | C |
| SELECT | - | View | Mode |
| START | + | Menu | Start |
5.3. Turbo Function
The controller supports a turbo function for rapid button presses. To activate turbo for a specific button, press and hold the desired button, then press the 'Turbo' button (if present, or a designated combination). Repeat the process to deactivate. Consult your game's settings for optimal use of turbo functions.
5.4. Button Swapping
The controller offers button swapping capabilities. Specific instructions for button remapping are typically found in the device's system settings or the game's controller configuration menu. This controller does not support software configuration directly on the gamepad itself.
6. Maintenance
6.1. Charging
Recharge the controller using the provided USB cable when the battery is low. A full charge typically takes a few hours. Avoid overcharging the battery to prolong its lifespan.
6.2. Cleaning and Storage
- Wipe the controller with a soft, dry cloth to remove dust and grime. Do not use liquid cleaners or abrasive materials.
- Store the controller in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
7. Troubleshooting
- Controller not connecting wirelessly:
- Ensure the 2.4G USB receiver is securely plugged into the device.
- Verify the controller is powered on and has sufficient battery charge.
- Try unplugging and re-plugging the USB receiver, then restarting the controller.
- Ensure no other 2.4G devices are causing interference.
- Buttons not responding or input lag:
- Check the battery level and recharge if necessary.
- Ensure the controller is within range of the 2.4G receiver.
- Try connecting the controller via wired USB to rule out wireless interference.
- Controller not recognized by the device:
- Confirm your device's operating system or console firmware is up to date.
- Try connecting to a different USB port on your device.
- For PC, ensure necessary drivers are installed (usually automatic for standard gamepads).
8. User Tips
- 2.4G Wireless, Not Bluetooth: This controller uses a dedicated 2.4G USB receiver for wireless connectivity, not Bluetooth. It will not pair directly with devices via Bluetooth.
- Optimal Performance: For the best wireless performance, ensure a clear line of sight between the controller and the USB receiver, and avoid placing the receiver near other wireless transmitters.
9. Warranty and Support
For warranty information and technical support, please refer to the manufacturer's official website or contact your retailer. Keep your proof of purchase for any warranty claims.