SNICLO Race480 FPVBOX FPV Camera

1. Introduction

The SNICLO Race480 FPVBOX is a compact and removable First-Person View (FPV) camera system specifically designed for use with the Q25 FPV Micro Car. This camera features a convenient magnetic mount for easy attachment and detachment, allowing users to quickly switch between FPV and standard driving modes. It transmits video on the 5.8G frequency band, providing an immersive driving experience.

2. Package Contents

Please check the package for the following items:

• Race480 FPVBOX Camera & Magnetic Mount × 1

Figure 2.1: Race480 FPVBOX Camera components.

3. Specifications

4. Setup Instructions

4.1. Attaching the FPV Camera

1. Ensure your Q25 FPV Micro Car is powered off before installation.
2. Locate the designated mounting area on your Q25 FPV Micro Car. The Race480 FPVBOX camera is designed for magnetic attachment.
3. Align the magnetic base of the FPVBOX camera with the corresponding magnetic points on your micro car. The camera should snap securely into place.
4. Verify that the camera is firmly attached and does not wobble.

Figure 4.1: Magnetic attachment of the FPV camera to the micro car.

4.2. Wiring Connection

The FPVBOX camera requires power from the micro car. Connect the provided wiring harness from the camera's magnetic base to the appropriate power port on your Q25 FPV Micro Car. The wiring typically consists of red (positive) and black (negative) wires, along with signal wires for video transmission. Refer to your micro car's manual for specific wiring port locations and polarity.

Figure 4.2: FPV camera 4-pin connector.

5. Operating Instructions

5.1. Powering On

Once the FPVBOX camera is securely mounted and wired, power on your Q25 FPV Micro Car. The camera will automatically power on and begin transmitting video on the 5.8G frequency band.

5.2. Receiving Video Feed

To view the FPV feed, you will need a compatible 5.8G FPV receiver and display (e.g., FPV goggles or a monitor). Ensure your receiver is tuned to one of the 4 available channels on the 5.8G frequency band to match the camera's transmission.

5.3. Detaching the Camera

To remove the FPVBOX camera, gently pull it away from the magnetic mount on the micro car. Ensure the micro car is powered off before detaching to prevent any electrical issues.

Note: Using the FPV camera may affect the micro car's battery life. With the FPV camera attached, expect approximately 30 minutes of playtime. Without the FPV camera, playtime may extend to approximately 60 minutes. Actual battery life can vary based on environmental conditions, road surface, control mode, and driving habits.

6. Maintenance

• Cleaning: Use a soft, dry cloth to clean the camera lens and body. Avoid using harsh chemicals or abrasive materials.
• Storage: Store the camera in a cool, dry place away from direct sunlight and extreme temperatures.
• Magnetic Mount: Keep the magnetic contacts clean and free from debris to ensure a secure connection.
• Wiring: Periodically inspect the wiring for any signs of wear or damage. Replace if necessary.

7. Troubleshooting

7.1. No Video Feed

• Ensure the camera is securely attached and the wiring harness is correctly connected to the micro car's power source.
• Verify that your FPV receiver is powered on and tuned to the correct 5.8G channel.
• Check the micro car's battery level.

7.2. Poor Video Quality / Interference

• Ensure there are no obstructions between the camera and the receiver.
• Minimize interference from other 5.8G devices or Wi-Fi networks.
• Try changing the channel on your FPV receiver to find a clearer signal.
• Check for any physical damage to the camera's antenna.

7.3. Camera Not Powering On

• Confirm the micro car is powered on and its battery is charged.
• Inspect the wiring connection for any loose contacts or damage.
• Ensure the magnetic mount is making proper contact for power transfer.

8. Safety Information

• This product is recommended for users aged 14 years and older.
• Always ensure the micro car is powered off before attaching or detaching the FPV camera or performing any wiring adjustments.
• Do not expose the camera to water or extreme moisture.
• Avoid dropping the camera or subjecting it to strong impacts.
• ⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

9. Warranty and Support

For any issues or questions regarding your SNICLO Race480 FPVBOX FPV Camera, please contact the retailer or manufacturer's customer support. Keep your purchase receipt as proof of purchase for warranty claims.