FOVORE HL75

Contents

PCIe to M.2 NVMe Adapter Card User Manual

Model: HL75

1. Product Overview

Thank you for choosing the FOVORE HL75 PCIe to M.2 NVMe Adapter Card. This product is designed to expand your device's capabilities by allowing you to add additional M.2 NVMe SSDs to your system. It provides stable data transmission and interface expansion, significantly boosting system performance with faster read and write speeds compared to traditional hard drives.

The PCIe X1 expansion card offers flexibility for upgrading your system with M.2 NVMe SSDs without needing to replace your entire system, providing a cost-effective and efficient data transfer solution.

Key features include:

  • Interface Type: PCIe to M.2 NVMe
  • Main Functions: Interface Expansion, Data Transfer.
  • Dual NVMe SSD Support: Can run two NVMe disks at full speed simultaneously.
  • LED Work Lights: Two hard drives have LED work lights, steady power on, flashing when reading and writing.
  • Server Compatibility: Supports 2U server small chassis installation.
  • High-Speed Signal Enhancement: Ensures stability and security for big data processing.
FOVORE HL75 PCIe to M.2 NVMe Adapter Card with heatsink and dual M.2 slots.
Figure 1: FOVORE HL75 PCIe to M.2 NVMe Adapter Card.

2. Safety Information

  • Power Off: Always shut down your computer and unplug the power cable from the wall outlet before installing or removing internal PCIe cards.
  • Hot-Swapping: Do NOT hot-swap internal PCIe cards while the PC is running. This can cause damage to the card or your system.
  • Heat Dissipation: Metal adapters may feel warm during high-speed data transfer. This is normal heat dissipation and does not affect safety.

3. Package Contents

The package includes:

  • 1 x FOVORE PCIe X1 to 2 Port M.2 NVMe SSD Adapter Card (Model: HL75)

4. Specifications

Attribute Value
Brand Name FOVORE
Model Number HL75
Interface Type M.2 (NVMe SSD)
Expansion Card Type Add On Cards (PCIe X1)
Chip ASM1182E
Package Yes
Origin Mainland China
Certification CE
Top view of the PCIe to M.2 NVMe adapter card showing dual M.2 slots and PCIe X1 connector.
Figure 2: Top view of the adapter card, highlighting the dual M.2 NVMe SSD slots and PCIe X1 interface.

5. Setup Guide

This section details the installation process for the internal PCIe expansion card.

  1. Power Off: Completely shut down your computer and unplug the power cable from the wall outlet.
  2. Open Case: Carefully remove the side panel of your computer case to access the motherboard.
  3. Locate PCIe Slot: Identify an available PCIe x1 slot on your motherboard.
  4. Insert Card: Align the gold fingers of the adapter card with the chosen PCIe x1 slot. Gently but firmly press the card down into the slot until it is fully seated.
  5. Secure: Use a screw to fix the metal bracket of the adapter card to the chassis to prevent it from moving.
  6. Install M.2 NVMe SSDs:
    • Locate the M.2 slots on the adapter card.
    • Insert your M.2 NVMe SSD(s) into the slots at an angle.
    • Gently push the SSD down and secure it with the provided screw or standoff.
  7. Close Case: Reattach the side panel of your computer case.
  8. Reconnect Power: Reconnect the power cable to your computer and the wall outlet.
  9. Reboot: Start your computer. The operating system should automatically recognize the new hardware and install basic drivers.
Angled view of the PCIe to M.2 NVMe adapter card, showing the PCIe connector and M.2 slots.
Figure 3: Angled view of the adapter card, illustrating the PCIe connector and M.2 NVMe SSD slots for installation.

6. Operating Instructions

Once the FOVORE HL75 adapter card and M.2 NVMe SSDs are correctly installed and recognized by your operating system, they will function as standard storage devices. You can manage them through your operating system's disk management tools (e.g., Disk Management in Windows, Disk Utility in macOS, or fdisk/gparted in Linux) to initialize, partition, and format the drives as needed.

The LED indicators on the card will provide visual feedback:

  • Steady Light: Indicates power on and the SSD is recognized.
  • Flashing Light: Indicates active reading and writing operations on the SSD.

7. Maintenance

The FOVORE HL75 adapter card requires minimal maintenance. Keep the following in mind:

  • Dust: Periodically clean the inside of your computer case to prevent dust buildup on the card, which can affect cooling and performance. Use compressed air for this purpose.
  • Firmware/Drivers: While most products are driver-free on Windows 10/11, ensure your operating system is up-to-date to benefit from the latest storage drivers.
  • Physical Inspection: Occasionally inspect the card for any loose connections or visible damage.

8. Troubleshooting

Q: Why is the device not recognized after connection?
A: Please ensure the adapter card is firmly seated in the PCIe slot and your M.2 NVMe SSDs are correctly installed and secured. If your system cannot detect the device, and you are using Windows 10/11, it should be driver-free. For other operating systems or persistent issues, contact customer support for driver download links or further assistance.
Q: Why is the transfer speed slower than advertised?
A: The final speed depends on the "weakest link" in the chain. Ensure your motherboard's PCIe slot, the M.2 NVMe SSDs themselves, and any other components in the data path all support the desired high-speed protocol. This card uses a PCIe X1 interface, which has a theoretical bandwidth limit. If you require higher speeds, ensure your system and components are compatible with higher PCIe lane configurations (e.g., x4, x8, x16).
Q: Does it require a driver?
A: Most products are driver-free on Windows 10/11. If your system cannot detect it, please contact customer service for the driver download link.

9. User Tips

  • PCIe Version: This card utilizes a PCIe 2.0 X1 interface. While suitable for many applications, if you require the absolute highest NVMe speeds, consider a card with a higher PCIe lane count (e.g., x4, x8, x16) and a newer PCIe generation (e.g., PCIe 3.0, 4.0, or 5.0) if your motherboard supports it.
  • Compatibility: Ensure your motherboard has an available PCIe x1 slot.
  • SSD Type: This adapter supports M.2 NVMe SSDs (M key). It is not compatible with M.2 SATA SSDs (B key or B+M key).

10. Warranty & Support

For warranty information, technical support, or to download the latest user manual (PDF), please refer to the official FOVORE Global Store on AliExpress or contact their customer service directly. The user manual PDF can be found at: User Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.