1. Introduction and Overview
The HIKVISION Value Series Face Access Terminal is an advanced access control device designed for secure and efficient entry management. Utilizing deep learning algorithms, it offers high-accuracy face recognition, supporting multiple authentication modes including face, card, and for specific models, fingerprint. These terminals are suitable for various applications in buildings, enterprises, financial institutions, and other important areas.
Key features include a 4.3-inch LCD touch screen, a 2-megapixel wide-angle lens, and a built-in Mifare card reading module. The device supports two-way audio communication with client software, indoor stations, and main stations, and offers flexible connectivity via TCP/IP and Wi-Fi (model dependent). Configuration can be performed conveniently via a web client.
Video: Overview of HIKVISION security products, including face access terminals.
2. Package Contents
Upon unboxing your HIKVISION Face Access Terminal, please verify that all components are present and in good condition:
- Face Access Terminal Unit
- Mounting Plate
- Power Adapter (12 VDC/1 A)
- Wiring Harness / Connectors
- Quick Start Guide (if included)

Image: Unboxing the Face Access Terminal and its accessories.
3. Setup and Installation
The Face Access Terminal is designed for wall mounting. Ensure you have the necessary tools and a stable surface for installation.
3.1 Physical Installation
- Choose a Location: Select a suitable wall location, ensuring the device is within the optimal face recognition distance (0.3 to 1.5 meters) from the expected user position. Consider lighting conditions to avoid glare.
- Mounting Plate: Use the provided mounting plate as a template to mark drilling points on the wall. Drill holes and insert wall plugs if necessary.
- Secure the Plate: Attach the mounting plate securely to the wall using appropriate screws.
- Connect Wiring: Before attaching the terminal, connect all necessary cables to the device's interfaces. Refer to the interface details below.
- Attach Terminal: Carefully align the terminal with the mounting plate and slide it into place, ensuring it locks securely.

Image: Rear view of the terminal with mounting plate.
3.2 Wiring and Connectivity
The terminal offers various interfaces for integration into your security system:
- Power Supply: Connect the 12 VDC/1 A power adapter to the device.
- Network Interface: Connect an Ethernet cable for wired network communication (10 M/100 M self-adaptive).
- Wi-Fi: For DS-K1T342MWX and DS-K1T342MFWX models, Wi-Fi connectivity is supported for wireless network integration.
- RS-485: For serial communication with other devices.
- Wiegand: For connecting to external access control readers or panels.
- Lock Output: Connect to an electronic lock for door control.
- Exit Button: Connect an exit button for convenient egress.
- Door Contact Input: Connect a door contact sensor to monitor door status.
- TAMPER: Tamper alarm input.
- USB: For data import/export or firmware upgrades.

Image: Side view of the terminal showing ports.
3.3 Initial Configuration
After physical installation and wiring, power on the device. Initial configuration, including network settings, user enrollment, and access rules, can be performed via the web client. Refer to the detailed software manual for comprehensive configuration steps.
4. Operating Instructions
The Face Access Terminal supports various authentication methods to grant access.
4.1 Face Recognition
The terminal uses a 2 MP wide-angle lens and deep learning algorithms for fast and accurate face recognition. It supports mask recognition, allowing authentication even when individuals are wearing face masks.
- Recognition Distance: Optimal distance is 0.3 to 1.5 meters from the device.
- Recognition Duration: Access is granted in less than 0.2 seconds per user.
- Accuracy: The system boasts an accuracy rate of over 99%.
- Anti-Spoofing: Face anti-spoofing is supported to prevent unauthorized access using photos or videos.
4.2 Card Access
The built-in Mifare card reading module supports M1 cards operating at 13.56 MHz. Present your registered Mifare card to the designated card reading area on the terminal for authentication.
4.3 Fingerprint Access (DS-K1T342MFWX & DS-K1T342MFX only)
For models DS-K1T342MFWX and DS-K1T342MFX, fingerprint authentication is available. Place your registered finger on the fingerprint sensor. Recognition typically takes less than 1 second.
4.4 Two-way Audio
The terminal supports two-way audio communication. This feature can be utilized with client software, an indoor station, or a main station, allowing for real-time communication with visitors or personnel at the access point.
4.5 Time Synchronization
The device supports time synchronization, ensuring accurate event logging and scheduling of access permissions.
5. Maintenance
Regular maintenance helps ensure the longevity and optimal performance of your Face Access Terminal.
- Cleaning: Gently clean the screen and lens with a soft, lint-free cloth. Avoid abrasive cleaners or solvents that could damage the surface.
- Firmware Updates: Periodically check for and install firmware updates provided by HIKVISION to enhance security, performance, and add new features. Updates can typically be performed via the web client or USB.
- Environmental Conditions: Ensure the device operates within the specified temperature and humidity ranges to prevent damage.
- Cable Connections: Periodically inspect all cable connections to ensure they are secure and free from damage.
6. Troubleshooting
If you encounter issues with your Face Access Terminal, consider the following common troubleshooting steps:
- Device Not Powering On: Check the power adapter connection and ensure the power outlet is functional. Verify the power adapter output matches the device's requirements (12 VDC/1 A).
- Network Connectivity Issues: For wired connections, check the Ethernet cable and network switch/router. For Wi-Fi models, ensure the Wi-Fi signal is strong and the correct network credentials are entered. Verify IP settings via the web client.
- Face Recognition Failure: Ensure the user is within the optimal recognition distance (0.3-1.5m) and that the lighting conditions are adequate (avoiding strong backlight or shadows on the face). Ensure the user's face is properly enrolled in the system.
- Card/Fingerprint Not Recognized: Verify that the card or fingerprint is properly enrolled in the system. Ensure the card is a Mifare M1 type. Clean the fingerprint sensor if applicable.
- Two-way Audio Not Working: Check speaker and microphone settings in the client software or web interface. Ensure network connectivity is stable.
- Device Unresponsive: Try restarting the device by disconnecting and reconnecting the power. If the issue persists, a factory reset might be necessary (consult the full user manual for instructions, as this will erase configurations).
For persistent issues, please contact HIKVISION technical support or your local distributor.
7. Specifications
Detailed specifications for the HIKVISION Face Access Terminal models:

Image: Detailed Specifications Table (Page 1)

Image: Dimensions for DS-K1T342MWX

Image: Dimensions for DS-K1T342MFWX

Image: Dimensions for DS-K1T342MFX
| Category | Parameter | Value |
|---|---|---|
| System | Operation System | Linux |
| Language Support | English, Spanish (South America), Arabic, Thai, Indonesian, Russian, Vietnamese, Portuguese (Brazil), Korean | |
| Display | Dimensions | 4.3-inch |
| Resolution | 272 × 480 | |
| Type | LCD | |
| Operation Method | Capacitive touch screen | |
| Video | Pixel | 2 MP |
| Lens | × 2 | |
| Video Standard | PAL (Default) and NTSC | |
| Network | Wired Network | 10 M/100 M self-adaptive |
| Wi-Fi (DS-K1T342MWX, DS-K1T342MFWX) | Support | |
| Wi-Fi (DS-K1T342MFX) | Not Support | |
| Interface | Network Interface | 1 |
| RS-485 | 1 | |
| Wiegand | 1 | |
| Lock Output | 1 | |
| Exit Button | 1 | |
| Door Contact Input | 1 | |
| IO Input | - | |
| IO Output | - | |
| TAMPER | 1 | |
| USB | 1 | |
| Capacity | Card Capacity | 3,000 |
| Face Capacity | 1,500 | |
| Fingerprint Capacity (DS-K1T342MFWX, DS-K1T342MFX) | 3,000 | |
| Event Capacity | 150,000 | |
| Authentication | Card Type | M1 card |
| Card Reading Frequency | 13.56 MHz | |
| Face Recognition Duration | < 0.2 s | |
| Face Recognition Accuracy Rate | > 99% | |
| Face Recognition Distance | 0.3 to 1.5 m | |
| Function | Face Anti-Spoofing | Support |
| Audio Prompt | Support | |
| Time Synchronization | Support | |
| General | Power Supply | 12 VDC/1 A (power adapter included) |
| Working Temperature | -30 °C to 60 °C (-22 °F to 140 °F) | |
| Working Humidity | 0 to 90% (No condensing) | |
| Dimensions | 91.3 mm × 181.3 mm × 24.5 mm (3.59" × 7.14" × 0.96") | |
| Installation | Wall Mounting | |
| Protective Level | IP65 | |
| Weight | Gross: 0.93 kg (2.05 lbs), Net: 0.36 kg (0.79 lbs) |
8. User Tips
- Optimal Face Enrollment: For best recognition results, ensure faces are enrolled under good lighting conditions and from various angles if possible.
- Regular Cleaning: Keep the screen and camera lens clean to maintain high recognition accuracy. Dust or smudges can impair performance.
- Software Updates: Regularly check for and apply software updates to benefit from the latest features, security enhancements, and performance improvements.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official HIKVISION website or contact your authorized HIKVISION dealer or distributor. Keep your purchase receipt and product serial number handy when seeking support.