intelamp YL002-12A1PK

Contents

Intelamp Solar Lights Outdoor with 3 Modes Motion Sensor

Model: YL002-12A1PK

Brand: intelamp

Introduction

The Intelamp Solar Lights Outdoor are designed to provide efficient and reliable illumination for various outdoor spaces such as gardens, yards, paths, and garages. Featuring a super bright LED, IP65 waterproof rating, and an advanced motion sensor with three lighting modes, this solar light offers enhanced security and convenience. Its adjustable lamp heads and solar panel ensure optimal light coverage and charging efficiency.

Intelamp Solar Light with three adjustable lamp heads and a solar panel on top, mounted on a wall. Text highlights 'Matrix 3-Lamp Head', 'Wide-angle Sensing', '270° illumination Lamp', 'Head can be Rotated', and 'Continuous Rainy days can be illuminated'.

Intelamp Solar Light featuring a 3-lamp head design with wide-angle sensing and 270° illumination. The lamp heads are rotatable, and the unit is designed to function even on continuous rainy days.

What's in the Box

  • Intelamp Solar Light Unit (with integrated solar panel and battery)
  • Mounting Screws
  • Wall Plugs
  • Cable Ties (for alternative mounting)
  • User Manual (this document)

Specifications

Feature Specification
Model Number YL002-12A1PK
Power Source Solar
Voltage 5V
Light Source LED bulbs
Brightness 1200 Lumens (High Brightness Mode)
Solar Panel Size Approx. 9.4 in (24.5 cm) x 4.3 in (11.5 cm) / 40 sq inch
Battery Type Lithium Battery (3.2V lithium iron phosphate)
Battery Capacity 6000 mAh
Protection Level IP65 (Waterproof)
Motion Sensor Dual Sensors, 180° Detection Angle, 25ft (7.6m) * 2 Operation Range
Illumination Angle 270° Wide Angle
Body Material ABS
Installation Method Self-contained (Screw fixation or Cable tie)
Is Dimmable Yes (via modes)
Warranty 1 year
Intelamp Solar Light with dimensions labeled. Solar panel is 9.4 inches (24.5 cm) wide and 4.3 inches (11.5 cm) high. The main light body is 12 inches (30.5 cm) wide. Two motion sensors are visible on the light body.

Dimensions of the Intelamp Solar Light, highlighting the large solar panel and dual sensors for enhanced detection.

Comparison image showing 'Ours' vs 'Others' solar lights. 'Ours' has 8 watts, 1200 lumens, a 40 sq inch solar panel (L9.4*W4.3), and a 6000 mAh battery. 'Others' has 4 watts, 600 lumens, a 15 sq inch solar panel (L5.9*W2.5), and a 2000 mAh battery.

Performance comparison: Intelamp's superior solar panel size, battery capacity, and brightness compared to typical alternatives.

Close-up of a green lithium battery labeled '6000mAh 3.2V lithium iron phosphate battery 32700'. Text states 'High Capacity Lithium Battery 3 times higher'.

High capacity 6000mAh lithium battery, offering 3 times higher capacity than many standard solar lights.

Setup & Installation

The Intelamp Solar Light is designed for easy installation on various surfaces. Ensure the solar panel is positioned to receive maximum direct sunlight throughout the day for optimal charging.

Mounting Options:

  • Screw Fixation: For hard surfaces like walls, wooden fences, or garage door frames. Use the provided screws and wall plugs. Intelamp Solar Light mounted on a light-colored wall using screws. A small icon shows screws and wall plugs.

    Installation on a wall using screw fixation.

  • Cable Tie Fixation: For attaching to trees or posts. Use the provided cable ties. Intelamp Solar Light mounted on a tree trunk using cable ties. A small icon shows two cable ties.

    Installation on a tree using cable ties.

Adjustable Design:

The lamp heads and solar panel can be adjusted to customize illumination and charging efficiency:

  • The middle lamp head can be adjusted vertically (up and down) by 45 degrees.
  • The side lamp heads can be adjusted horizontally (left to right) by up to 90 degrees.
  • The solar panel can be adjusted vertically (up and down) by 60 degrees. The optimum tilt angle is usually 20 degrees to maximize sunlight exposure and allow rainwater to clean dust efficiently.
Diagram showing the adjustable features of the Intelamp Solar Light. The solar panel can be adjusted 60 degrees vertically. The middle lamp head can be adjusted 45 degrees vertically. The two side lamp heads can be adjusted 90 degrees horizontally.

Adjustable and flexible design for optimal light direction and solar charging.

Operating Instructions

Upon receiving your solar light, ensure it is fully charged under direct sunlight for at least 6-8 hours before initial use. The unit has a 'POWER' button and a 'MODE' button.

Initial Activation and Mode Selection:

  1. Press the "POWER" button to turn on the light.
  2. Cover the solar panel (to simulate nighttime conditions).
  3. Press the "MODE" button repeatedly to cycle through the three available lighting modes until you select your desired setting.

Lighting Modes:

  • Mode 1 (Sensor Mode - High Brightness with Dim): The light will stay on at a low brightness setting. When motion is detected, it will illuminate brightly. After motion ceases, it returns to low brightness.
  • Mode 2 (Sensor Mode - High Brightness, then Off): The light will remain off. When motion is detected, it will illuminate brightly. After motion ceases, the light will turn off completely.
  • Mode 3 (ON Mode - Constant Low Brightness): The light will stay on at a constant low brightness throughout the night, and the motion sensor is inactivated in this mode.
Diagram illustrating the two main operating modes: Sensor Mode and ON Mode. Sensor Mode shows high brightness when a person walks by, then low brightness or off. ON Mode shows constant lighting. Buttons for MODE and POWER are also shown.

Visual representation of Sensor Mode (high brightness on motion, then dim or off) and ON Mode (constant lighting).

Product overview video demonstrating features, comparisons, and motion sensor functionality.

Maintenance

  • Cleaning: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris. A clean solar panel ensures maximum charging efficiency.
  • Positioning: Periodically check that the solar panel is still in an optimal position to receive direct sunlight, especially after seasonal changes or if new obstructions appear.
  • Battery: The integrated lithium iron phosphate battery has a service life of more than 5 years. No user maintenance or replacement is typically required during this period.
  • Weather Protection: The light is IP65 waterproof, designed to withstand rain and outdoor elements. However, avoid submerging the unit in water.

Troubleshooting

  • Light not turning on at night:
    • Ensure the solar panel is receiving sufficient direct sunlight during the day (6-8 hours recommended).
    • Check if the power button is pressed to turn the light ON.
    • Verify that the selected lighting mode is appropriate for your needs (e.g., Mode 2 will turn off completely when no motion is detected).
  • Light stays on constantly or doesn't turn off:
    • You might be in Mode 3 (ON Mode), which keeps the light on at low brightness all night. Cycle through modes to select a sensor-based mode (Mode 1 or 2).
    • Ensure there are no constant movements within the sensor's detection range that might be continuously triggering the light.
  • Motion sensor not detecting:
    • Ensure the sensor lenses are clean and free from obstructions.
    • Check the detection range and angle (180° detection, up to 25ft/7.6m * 2).
    • Verify the light is not in Mode 3, which disables the motion sensor.
  • Reduced brightness or short lighting duration:
    • The battery might not be fully charged. Ensure the solar panel is clean and receiving adequate sunlight.
    • Cloudy or rainy days can reduce charging efficiency, leading to shorter lighting times. The intelligent technology helps, but prolonged poor weather will affect performance.

User Tips

  • Optimal Placement: For best performance, install the solar light in an area that receives at least 6-8 hours of direct sunlight daily. Avoid shaded areas.
  • Adjust for Coverage: Utilize the adjustable lamp heads and solar panel to direct light precisely where needed and maximize solar charging.
  • Test Modes: After installation, test all three lighting modes by covering the solar panel to simulate darkness and observing the light's behavior to ensure the desired mode is selected.
  • No Remote Control: This model does not come with a remote control. All settings are managed via the physical buttons on the unit.

Warranty & Support

The Intelamp Solar Light comes with a 1-year warranty from the date of purchase, covering manufacturing defects. For any issues or support, please contact Intelamp customer service. A comprehensive installation manual is included with the product, and our after-sales service team is available to ensure customer satisfaction.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.