THINKCAR THINKTOOL USB Video Inspection Scope Camera User Manual

1. Safety Precautions and Warnings

To prevent personal injury or damage to vehicles and/or this tool, please read this user's manual carefully and observe the following safety precautions at a minimum whenever working on a vehicle:

• Always perform automotive testing in a safe environment.
• Do not attempt to operate or observe the tool while driving a vehicle. Operating or observing the tool will cause driver distraction and could cause a fatal accident.
• Wear safety eye protection that meets ANSI standards.
• Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine parts.
• Operate the vehicle in a well-ventilated work area: Exhaust gases are poisonous.
• Put blocks in front of the drive wheels and never leave the vehicle unattended while running tests.
• Use extreme caution when working around the ignition coil, distributor cap, ignition wires and spark plugs. These components create hazardous voltages when the engine is running.
• Put the transmission in P (for A/T) or N (for M/T) and make sure the parking brake is engaged.
• Keep a fire extinguisher suitable for gasoline/chemical/electrical fires nearby.
• Don't connect or disconnect any test equipment while the ignition is on or the engine is running.
• Keep this tool dry, clean, free from oil/water or grease. Use a mild detergent on a clean cloth to clean the outside of the tool when necessary.
• Please use the DC 5V power adaptor to charge this tool. No responsibility can be assumed for any damage or loss caused as a result of using power adaptors other than the right one.

2. Product Overview

The THINKCAR THINKTOOL USB Video Inspection Scope Camera is a versatile tool designed for detailed visual inspection in hard-to-reach areas. It features a flexible, hardwired coil with an integrated camera and LED lights, connecting via USB to a compatible device for real-time viewing and recording.

2.1 Key Features

• High Definition Resolution: 1280 * 720 for clear images and videos.
• Long Flexible Coil: 60 inches (150cm) super long hardwired coil for reaching tight spaces.
• Integrated LED Lights: 6 bright LED auxiliary lights to illuminate dark inspection areas.
• Durable Design: Water, oil, and corrosion resistant, with an IP67 rating for alkali resistance.
• Easy to Use: Flexible and simple USB connection.

2.2 Applications

This inspection camera is ideal for:

• Automotive diagnostics and inspection (e.g., engine, suspension parts).
• Tracing oil leaks.
• Unblocking drains.
• Checking wall cavities.
• General inspection in limited visibility areas.

3. Setup and Connection

3.1 Connecting the USB Video Scope

The USB Video Inspection Scope Camera is designed for simple plug-and-play operation. It can be connected to any compatible device with a standard USB-A port, such as a computer or a vehicle scan tool.

1. Locate the USB-A connector on the end of the scope cable.
2. Plug the USB-A connector into an available USB port on your computer or diagnostic tool.
3. Once connected, the device should automatically recognize the camera. You may need to open a compatible camera application on your device to view the video feed.

3.2 Product Demonstration Video

Watch this video for a visual guide on the product's flexibility and camera head features:

4. Operation

4.1 Using the Camera

1. Ensure the USB Video Scope is properly connected to your viewing device (computer or diagnostic tool).
2. Open the appropriate camera or video application on your device. The live video feed from the scope camera should appear on the screen.
3. Carefully guide the flexible coil and camera head into the area you wish to inspect. The 60-inch length and flexible design allow for easy maneuverability in tight and confined spaces.
4. Observe the high-definition video feed on your screen to identify any issues or details.

4.2 Adjusting LED Lights

The camera head is equipped with 6 bright LED auxiliary lights. These lights automatically illuminate when the camera is active, providing necessary visibility in dark environments. There is a control on the cable to adjust the brightness of the LED lights.

4.3 Capturing Images and Videos

Most compatible camera applications will allow you to capture still images and record videos directly from the live feed. Refer to your device's software manual for specific instructions on how to use these functions.

5. Maintenance

5.1 Cleaning

To ensure the longevity and optimal performance of your USB Video Scope, keep it dry, clean, and free from oil, water, or grease. Use a mild detergent on a clean cloth to gently wipe the outside of the tool when necessary. Avoid harsh chemicals or abrasive materials.

5.2 Storage

When not in use, store the camera in a cool, dry place, away from direct sunlight and extreme temperatures. Keep the coil neatly wound to prevent kinks or damage.

6. Troubleshooting

6.1 Common Issues and Solutions

• Q: Why does the camera have no response when connected to a device?
  A: Check whether the USB connection is firm and correct. Ensure the device you are connecting to has a compatible USB port and the necessary drivers or software installed.
• Q: Why does the video feed stop or freeze?
  A: This may be caused by a loose USB connection. Disconnect the scope, ensure the connector is clean, and then firmly reconnect it to the device.

7. Specifications

8. User Tips

• For optimal viewing, ensure your connected device's screen is clean and free from glare.
• Utilize the flexible coil to navigate around obstacles and into the deepest parts of inspection areas.
• The integrated LED lights are crucial for dark environments; ensure they are functioning correctly for clear visibility.
• Regularly check for software updates for your viewing application or diagnostic tool to ensure compatibility and access to the latest features.

9. Warranty and Support

9.1 Warranty Terms

This warranty applies only to users and distributors who purchase THINKCAR TECH INC products through normal procedures. Within one year from the date of delivery, THINKCAR TECH warrants its electronic products for damages caused by defects in materials or workmanship. Damages to the equipment or components because of abuse, unauthorized modification, use for non-designed purposes, operation in a manner not specified in the instructions, etc. are not covered by this warranty. The compensation for dashboard damage caused by the defect of this equipment is limited to repair or replacement. THINKCAR TECH does not bear any indirect and incidental losses. THINKCAR TECH will judge the nature of the equipment damage according to its prescribed inspection methods. No agents, employees or business representatives of THINKCAR TECH are authorized to make any confirmation, notice or promise related to THINKCAR TECH products.

9.2 Contact Information

For technical support or warranty inquiries, please contact THINKCAR TECH INC:

• Website: www.diagtools.eu
• Address: Pernavas 43A, Riga, Latvia, LV-1009
• Phone: +37129416069
• Email: info@diagtools.eu