1. Introduction
1.1 Product Overview
The LILYGO® T-Display-S3 AMOLED is an advanced development board that integrates the powerful ESP32-S3 microcontroller with a vibrant AMOLED display. This board represents an upgrade from previous T-Display-S3 models, offering enhanced visual performance and connectivity. It is designed for developers and hobbyists looking to create projects requiring a compact, high-quality display with robust wireless capabilities.

1.2 Product Highlights
This board is the inaugural development board that pairs the ESP32-S3 with an AMOLED display. The AMOLED screen features vibrant colors, lower power consumption, and the ability for individual pixels to light up, providing superior visual effects. The 4-bit QSPI support ensures more efficient data transmission compared to traditional SPI interfaces.


2. Key Features
- First ESP32-S3 + AMOLED combination development board.
- Upgraded from LCD to AMOLED display for superior color reproduction and visual clarity.
- Utilizes QSPI interface for faster display data transmission.
- Features a 3D antenna for improved WiFi and Bluetooth connectivity.
- AMOLED screen offers vibrant colors, lower power consumption, and individual pixel lighting.
- Equipped with an acrylic shell for screen protection.
- Provides a wide viewing angle of up to 178 degrees with no color distortion.
3. Technical Specifications
3.1 T-Display-S3 AMOLED Board Specifications
| Feature | Description |
|---|---|
| MCU | ESP32-S3R8 Dual-core LX7 microprocessor |
| Flash | 16MB |
| PSRAM | 8MB |
| Wireless Connectivity | 2.4 GHz Wi-Fi 802.11, Bluetooth 5.0 (LE) |
| Programming Platform | Arduino-IDE, PlatformIO-IDE, MicroPython |
| Bat voltage detection | IO04 |
| Onboard Functions | Boot + Reset + IO21 Button |

3.2 1.91-inch RM67162 IPS AMOLED Display Specifications
| Feature | Description |
|---|---|
| Drive Chip | RM67162 |
| Resolution | 240(W)xRGBx536(H) |
| Active Area | 19.8x44.22mm |
| Interface | QSPI |
| Viewing Angle | IPS Full View Angle |

3.3 Physical Dimensions
The overall dimensions of the T-Display-S3 AMOLED development board are approximately 60mm (Length) x 25.5mm (Width) x 10mm (Height).


4. Product Variants and Components
4.1 Version Comparison
The T-Display-S3 AMOLED is available in different configurations, including basic and touch-enabled versions, and with options for soldered or unsolderable pins. There are also older and newer versions with minor physical differences but identical performance.

4.2 Basic Version (No Touch)
This version provides the core functionality without touch input. It is available with or without pre-soldered pins.
- No Soldering Pin: Ideal for users who prefer to solder their own connections or use breadboards.
- Soldering Pin: Comes with male pins pre-soldered for direct use with breadboards or female headers.


4.3 Touch Version
This version includes touch input capabilities for interactive projects. It is also available with or without pre-soldered pins.
- No Soldering Pin: For custom soldering or breadboard use.
- Soldering Pin: Comes with male pins pre-soldered.


4.4 Camera Shield (Optional Accessory)
An optional Camera Shield is available to extend the functionality of your T-Display-S3 AMOLED board with camera capabilities. Please note that the Camera Shield package does not include the T-Display S3 AMOLED device itself.
- Included in Camera Shield Package: 1 X Camera Shield, 2 X Female Pin (1*14P)

5. Setup and Connection
5.1 Pin Diagram
Refer to the following pin diagrams for detailed information on the board's pinout. This is crucial for connecting external components and understanding the board's capabilities.


5.2 Programming Environment
The T-Display-S3 AMOLED supports various programming environments, making it versatile for different development workflows:
- Arduino-IDE: A popular choice for beginners and rapid prototyping.
- PlatformIO-IDE: A powerful, cross-platform development ecosystem.
- MicroPython: For Python enthusiasts looking to program microcontrollers.
For sample code and detailed technical documentation, please visit the official LILYGO Github repositories:
6. Operating Instructions
6.1 Basic Operation
The board features essential buttons for control:
- BOOT Button: Used for entering bootloader mode, typically pressed during firmware upload.
- RESET Button: Restarts the device.
- IO21 Button: A general-purpose input/output button, its function depends on your programmed firmware.
For the Touch Version, the central button on the display acts as an additional input for user interaction.
6.2 Powering the Device
The T-Display-S3 AMOLED can be powered via its USB-C port or through the provided 1.25mm 2P power cable, typically used for battery connections. Ensure the power source provides appropriate voltage (3.3V or 5V, depending on the pin) to avoid damage.
6.3 Display Functionality
The 1.91-inch AMOLED display is driven by the RM67162 chip via a QSPI interface. This configuration allows for fast and fluid display updates with vibrant colors and deep blacks. The wide viewing angle ensures consistent image quality from various perspectives.

7. Care and Maintenance
- Environmental Conditions: Keep the device in a dry environment and avoid exposure to moisture, humidity, or extreme temperatures.
- Cleaning: Gently clean the AMOLED screen with a soft, lint-free cloth. Do not use abrasive cleaners or solvents, as these can damage the display or acrylic shell.
- Handling: Handle the development board with care to prevent physical damage to the components or the screen. The acrylic shell provides protection, but excessive force can still cause damage.
- Power Supply: Always use a stable and appropriate power supply to prevent electrical damage to the ESP32-S3 chip and other components.
8. Troubleshooting
- Device not powering on: Ensure the power cable is correctly connected to the appropriate power input (USB-C or battery connector) and that the power source is functional. Check for any visible damage to the board or cables.
- Display not showing anything: Verify that the board is powered on. If using custom firmware, ensure the display initialization code is correct and that the display is properly connected (if detachable).
- WiFi/Bluetooth connectivity issues: Check your code for correct WiFi/Bluetooth initialization and credentials. Ensure the 3D antenna is not obstructed and is properly connected (if external).
- Touch screen unresponsive (Touch Version): Confirm that the touch functionality is enabled and correctly configured in your software. Ensure the screen surface is clean and free from debris.
- Firmware upload failure: Ensure the board is in bootloader mode (usually by holding the BOOT button while connecting USB or pressing RESET). Check your IDE settings for correct board and port selection.
9. User Tips
- Stay Updated: Regularly check the official LILYGO Github repositories for the latest firmware, libraries, and examples to ensure you have access to new features and bug fixes.
- Experiment with Variants: If you're new to development boards, consider starting with a 'No Soldering Pin' version for easier prototyping on a breadboard. For more permanent projects, the 'Soldering Pin' versions offer a robust connection.
- Leverage AMOLED: The AMOLED display's vibrant colors and deep blacks are excellent for creating visually appealing user interfaces and data visualizations. Explore graphics libraries that take full advantage of its capabilities.
- Community Support: Engage with the LILYGO community or online forums for ESP32-S3 development. Many common issues and creative project ideas are shared by other users.
10. Support and Resources
For technical assistance, detailed documentation, and community resources, please refer to the following:
- Official LILYGO Github for T-Display-S3 AMOLED: https://github.com/Xinyuan-LilyGO/T-Display-S3-AMOLED
- General LILYGO AMOLED Series Information: https://github.com/Xinyuan-LilyGO/LilyGo-AMOLED-Series
If you encounter any issues with the product package upon receipt, or if you have specific customization needs, please contact LILYGO customer service for assistance.