1. Product Overview
The AULA F21 is a versatile 21-key mechanical numeric keypad designed for enhanced productivity and gaming. It features a transparent design, hot-swappable switches, and multiple connection options.

Package Contents
- AULA F21 Numeric Keypad
- Type-C Charging Cable
- User Manual
- Keycap Puller
- Switch Puller
- Cleaning Cloth
2. Setup Guide
Initial Charging
Before first use, it is recommended to fully charge the keypad. Connect the included Type-C charging cable to the keypad's Type-C port and the other end to a USB power source (e.g., computer USB port, wall adapter).

Connection Modes
The AULA F21 supports three connection modes: 2.4GHz wireless, Bluetooth, and Type-C wired. A switch on the bottom of the keypad allows you to select the desired mode.

- 2.4GHz Wireless Mode:
- Locate the USB receiver (usually stored in the keypad's battery compartment or packaging).
- Plug the USB receiver into an available USB port on your computer.
- Slide the mode switch on the bottom of the keypad to the '2.4G' position.
- Press
FN+0on the keypad to activate 2.4GHz mode. The keypad should connect automatically.
- Bluetooth Mode (BT1, BT2, BT3):
- Slide the mode switch on the bottom of the keypad to the 'BT' position.
- Press and hold
FN+1(for BT1),FN+2(for BT2), orFN+3(for BT3) for 3-5 seconds until the indicator light flashes, indicating pairing mode. - On your device (computer, tablet, smartphone), search for Bluetooth devices and select 'AULA F21' (or similar name) to pair.
- Repeat for up to three different Bluetooth devices using
FN+1,FN+2, andFN+3.
- Type-C Wired Mode:
- Connect the Type-C cable to the keypad and your computer.
- Press
FN+4on the keypad to activate wired mode. - The keypad will function as a standard wired numeric keypad.

3. Operating Instructions
Basic Key Functions
The AULA F21 features a 21-key layout, including standard numeric keys, arithmetic operators, and special function keys like Esc, Tab, Num, and Enter. The 'Fn' key is used in combination with other keys for advanced functions.
Switching Between Connected Devices
Once paired, you can switch between your connected Bluetooth devices (BT1, BT2, BT3) by simply pressing FN + 1, FN + 2, or FN + 3. To switch to 2.4GHz wireless, press FN + 0. For wired mode, press FN + 4.
Backlight Control
The keypad features a single white backlight. Use the dedicated backlight control keys (often combined with Fn) to adjust brightness or toggle the backlight on/off. Refer to the keycap legends for specific backlight functions.
Custom Software and Macros
The AULA F21 supports custom software to personalize lighting effects and key functions, including macros. This allows you to tailor the keypad to your specific needs for work or gaming.

4. Maintenance
Cleaning
- Disconnect the keypad from all devices and power sources before cleaning.
- Use a soft, lint-free cloth, slightly dampened with water or a mild cleaning solution, to wipe the surface.
- For keycaps, you can use the included cleaning cloth. Avoid excessive moisture.
- Do not use harsh chemicals or abrasive materials.
Hot-Swappable Switch Replacement
The AULA F21 features hot-swappable mechanical switches, allowing for easy replacement without soldering. It supports 3-pin and 5-pin switches.

- Using the included switch puller, carefully grip the switch from the top and bottom.
- Gently pull the switch straight up to remove it from the PCB.
- Align the pins of the new switch with the holes on the PCB.
- Press the new switch firmly into place until it clicks. Ensure it is seated correctly and not bent.
- Replace the keycap using the keycap puller or by hand.


5. Troubleshooting
- Keypad not responding: Ensure the keypad is charged. Check the mode switch on the bottom and confirm it's set to the correct connection mode (2.4G, BT, or Wired). For wireless modes, ensure the receiver is properly plugged in or Bluetooth is paired.
- Connection issues (2.4GHz/Bluetooth): Make sure the keypad is within range of your device. Try re-pairing the Bluetooth connection or re-plugging the 2.4GHz receiver. Ensure no other devices are interfering with the wireless signal.
- Backlight not working: Check backlight settings via the custom software or dedicated Fn key combinations. Ensure the keypad is sufficiently charged.
- Specific keys not working: If a single key is not responding, it might be a faulty switch. Utilize the hot-swappable feature to replace the switch.
6. Specifications

| Feature | Description |
|---|---|
| Brand | AULA |
| Model | F21 |
| Type | Customized Keyboard, Numeric Keypad |
| Number of Keys | 21 |
| Connection Modes | Bluetooth 5.2, 2.4GHz Wireless, Type-C Wired |
| Simultaneously Connected Devices | Up to 3 (Bluetooth) |
| Backlight Effect | Single White Light (Monochrome) |
| Keycap Material | PBT, Transparent (Pudding Style) |
| Operation Style | Mechanical (Hot-swappable 3/5 pin switches, Ice Crystal Switch, Transparent Jellyfish Shaft) |
| Battery | Rechargeable, 600mAh |
| Charging Interface | Type-C |
| Dimensions (L x W x H) | 120.5 x 82.5 x 37.8 ±3mm |
| Product Weight | 158 ±3g |
| Compatibility | Windows, macOS, Android (Multi-system) |
| Special Features | Ergonomic, All keys punchless (N-key rollover), Noise-canceling structure (built-in sandwich cotton), Custom Macros |
7. User Tips
- Rechargeable Battery: The keypad features a built-in rechargeable battery, eliminating the need for disposable batteries. Simply connect it via the included Type-C cable to recharge.
- Customization: Explore the custom software to unlock the full potential of your keypad, including personalized lighting effects and macro programming for increased efficiency.
- Switch Swapping: When swapping switches, ensure the new switch's pins are perfectly aligned to avoid bending them. Apply gentle, even pressure.
- Multi-Device Use: Take advantage of the three Bluetooth channels to quickly switch between your computer, tablet, and smartphone for seamless workflow.
8. Warranty and Support
For warranty information, technical support, or any inquiries regarding your AULA F21 Numeric Keypad, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.