MatSee Plus ZigBee Energy Meter 80A

Contents

MatSee Plus ZigBee Energy Meter 80A Instruction Manual

Model: ZigBee Energy Meter 80A | Brand: MatSee Plus

1. Introduction

Thank you for choosing the MatSee Plus ZigBee Energy Meter 80A. This device is designed to monitor your electricity consumption (KWh), voltage, current, and power in real-time. It integrates seamlessly with the Tuya Smart or Smart Life mobile applications, allowing for smart automation and detailed energy statistics. This manual provides essential information for the safe installation, setup, and operation of your energy meter.

Important Note: This device requires a Tuya ZigBee Gateway (Hub) to connect and is not compatible with Zigbee Home Assistant or other non-Tuya applications.

Tuya ZigBee Energy Meter with Current Sensor Clamp and App Interface
Overview of the MatSee Plus ZigBee Energy Meter, showing the device, current transformer clamp, and real-time data display on the mobile application.

2. Safety Warnings

WARNING: Failure to follow these instructions may result in death, serious injury, fire, electric shock, or damage to the Power Clamp and other property. Read all safety notices below before using the Power Clamp.

  • The power clamp must be installed and serviced only by qualified electrical personnel.
  • Do not touch the terminals of the device during testing.
  • Turn off all power supply for this equipment before installing.
  • Make sure that the power supply is off before connecting or disconnecting it to an auxiliary device.
  • Always use a properly rated voltage sensing device to confirm power is off.
  • Avoid high humidity or extreme temperatures.
  • Avoid long exposure to direct sunlight or strong ultraviolet light.
  • Do not drop or expose the unit to intense vibration.
  • Do not disassemble or try to repair the unit on your own.
  • Do not expose the unit or its accessories to flammable liquids, gases, or other explosives.
Danger Electric Shock Symbol
Safety warning symbol for electric shock.

3. Technical Specifications

FeatureSpecification
Input VoltageAC 100-240V 50/60Hz
Measuring Range0.2A-80A
Wireless ProtocolZigBee
Device Dimensions50mm x 45mm x 23mm
Clamp Diameter10mm
Working Temperature-10°C ~ +55°C
CertificationsCE, RoHS
Dimensions of the ZigBee energy meter and current sensor clamp
Technical drawing showing the physical dimensions of the energy meter (50x46mm) and the current transformer clamp (10mm diameter, 0.7m cable).

4. Package Contents

The package typically includes:

  • 1 x MatSee Plus ZigBee Energy Meter
  • 1 x Current Transformer (CT) Clamp (0.2-80A)
  • 1 x User Manual (this document, also available as a PDF download)

5. Setup Guide

5.1. App Download

To use the energy meter, you need the Tuya Smart or Smart Life application. Scan the QR codes below or search for 'Smart Life' or 'Tuya Smart' in your device's App Store, Google Play, or Android Market.

QR codes for Smart Life and Tuya Smart apps
QR codes for downloading the Smart Life and Tuya Smart applications.

5.2. ZigBee Gateway Requirement

This energy meter communicates via ZigBee protocol. Therefore, a Tuya ZigBee Gateway (Hub) is required and must be configured with the app before adding this ZigBee Meter. The device cannot directly connect to 2.4G WiFi signals.

5.3. Device Pairing

Follow these steps to add the energy meter to your app:

  1. Ensure your ZigBee Gateway is powered on and connected to the app.
  2. Power on the MatSee Plus ZigBee Energy Meter.
  3. Press and hold the reset button on the energy meter for approximately 5 seconds until the red LED light flashes quickly. This indicates pairing mode.
  4. In the Tuya Smart or Smart Life app, navigate to your ZigBee Gateway and select 'Add subdevice'.
  5. Confirm that the LED is blinking in the app and proceed with the discovery process.
  6. Once the device is discovered and added, click 'DONE'.
This video shows the step-by-step process of pairing the MatSee Plus ZigBee Energy Meter with a wireless ZigBee gateway and then monitoring electricity usage (voltage, current, power, KWh) in the mobile application.

6. Installation

6.1. Mounting

The energy meter is designed for easy installation and can be mounted on a 35mm DIN rail.

ZigBee energy meter mounted on a 35mm DIN rail
Image demonstrating the energy meter's compatibility with 35mm DIN rail mounting for easy installation in electrical panels.

6.2. Wiring Diagram

Before proceeding with wiring, ensure the main power supply is turned OFF at the circuit breaker to prevent electric shock.

Wiring diagram for the ZigBee energy meter with current sensor clamp
Detailed wiring diagram showing how to connect the ZigBee energy meter to the main power lines (L and N) and how to install the current transformer clamp around the live wire to monitor a load.

Important Note for CT Clamp: Please only put ONE wire (either live wire or neutral wire) into the current transformer clamp. Do NOT put both wires together, otherwise the reading value will be zero.

Current transformer clamp safely installed around a single wire without direct connection
Illustration emphasizing the safe, non-contact installation of the current transformer clamp by simply clipping it around a single live or neutral wire.

7. Operating Instructions

Once the device is successfully paired and installed, you can monitor and manage your energy usage through the Tuya Smart or Smart Life app.

7.1. Real-time Monitoring

The app provides real-time data for:

  • Current Electricity (mA)
  • Current Power (W)
  • Current Voltage (V)
App interface displaying real-time voltage, current, and power readings
Screenshot of the mobile application showing real-time electricity monitoring data including voltage, current, and power.

7.2. Electricity and Cost Statistics

The app allows you to view detailed energy consumption statistics:

  • Hourly Electricity (KWh)
  • Daily Electricity (KWh)
  • Weekly Electricity (KWh)
  • Monthly Electricity (KWh)

You can also see the associated electricity costs during these periods within the app.

App interface displaying daily, weekly, and monthly energy consumption statistics
Screenshot of the mobile application illustrating energy consumption statistics over daily, weekly, and monthly periods, including associated costs.

7.3. Automation and Scene Creation

The energy meter can be integrated into smart home automation routines with other Tuya-compatible devices. You can set up scenes where, for example, if the monitored power or current exceeds a certain value, another Tuya device is triggered to turn on or off.

App interface for creating automation scenes based on power, voltage, or current thresholds
Screenshots from the app demonstrating how to configure automation rules to send notifications when the monitored current reaches a specific value (e.g., 0mA).

7.4. Notifications

You can configure the app to send notifications based on specific conditions, such as when the current of the monitored device drops to zero, indicating it has been turned off.

App interface showing how to set up current-based notifications
Screenshots from the app demonstrating how to configure automation rules to send notifications when the monitored current reaches a specific value (e.g., 0mA).

8. Maintenance

  • Keep the device clean and dry. Avoid exposure to dust, dirt, and moisture.
  • Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. Wipe it with a soft, damp cloth.
  • Regularly check the wiring connections to ensure they are secure.

9. Troubleshooting

9.1. App shows 'Device is power off' or 'shutdown'

This message appears if the current transformer clamp is not properly installed or if the monitored device is not drawing power. Ensure that:

  • Only one wire (either live or neutral) is placed inside the CT clamp.
  • The monitored device is turned on and actively consuming electricity.

9.2. Incorrect Power Readings (P ≠ U*I)

The power reading (P) may not directly equal Voltage (U) multiplied by Current (I) due to the power factor (cos(Φ)). Real power is calculated as P = V * I * cos(Φ) Watts (W). The device measures real power, which accounts for the phase difference between voltage and current in AC circuits.

9.3. Device fails to pair with the ZigBee Gateway

  • Ensure the ZigBee Gateway is powered on and within range of the energy meter.
  • Verify that the energy meter's LED is blinking rapidly, indicating it's in pairing mode. If not, press and hold the reset button for 5 seconds.
  • Confirm you are using the Tuya Smart or Smart Life app and a compatible Tuya ZigBee Gateway.
  • If issues persist, try resetting both the gateway and the energy meter and attempt pairing again.

10. User Tips

  • For accurate readings, ensure the CT clamp is securely closed around a single conductor.
  • Utilize the automation features to create smart scenes, such as turning off high-power devices if consumption exceeds a set limit.
  • Regularly check the energy statistics in the app to identify patterns and optimize your electricity usage.

11. Warranty and Support

MatSee Plus guarantees the quality of every product. Each unit undergoes testing before delivery. For any questions or support, please contact customer service online or send an email to sophie@matseeplus.com.

Quality control and testing facility for the energy meter
Image showing a quality control certificate and manufacturing facility, indicating product testing before delivery.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.