JYX JYX-738

Contents

JYX-738 Wireless Bed-Wetting Urine Alarm and Toilet Trainer User Manual

Model: JYX-738

1. Introduction

The JYX-738 is a versatile wireless bed-wetting urine alarm and toilet trainer designed to assist both children and elderly individuals. It utilizes a combination of light, vibration, and music to provide timely reminders, aiding in the development of bladder control and promoting hygiene.

This device functions in two primary ways:

  • Urine Alarm: Detects moisture to alert users to wetness, helping to prevent bed-wetting and ensuring prompt diaper changes to maintain cleanliness and prevent skin irritation.
  • Toilet Trainer: Can be set to provide regular timed reminders, encouraging users to visit the toilet at predetermined intervals, thereby fostering physiological stimulation for toilet training.

Its wireless design and watch-like form factor offer discretion and convenience, enhancing user confidence during the training process.

2. Package Contents and Components

Please ensure all components are present and undamaged upon unboxing.

  • 1x Wireless Wrist Unit (Alarm Receiver)
  • 1x Wireless Urine Moisture Sensing Transmitter (Sensor)
  • 1x Charging Cable
  • User Manual (this document)
Diagram of JYX-738 wireless bedwetting alarm components and controls

Figure 1: JYX-738 Wireless Bedwetting Alarm Components and Controls

Wrist Unit Controls:

  • Ring mode icon
  • Vibration mode icon
  • Child lock icon
  • Time display
  • Electric quantity indicator
  • Mode key
  • Sound+Vibration mode icon
  • Power switch
  • Timing button
  • Indicator light

Urine Moisture Sensing Transmitter:

  • Urine moisture sensing area
  • Power indicator light

3. Setup and Installation

  1. Charging the Devices: Before first use, fully charge both the wrist unit and the urine moisture sensing transmitter using the provided charging cable. The indicator lights will show charging status and turn off or change color when fully charged.
  2. Wearing the Wrist Unit: Securely attach the wrist unit to the user's wrist using the adjustable strap. Ensure it is comfortable but snug enough to remain in place during sleep or activity.
  3. Positioning the Sensor:
    • For bed-wetting detection: Place the urine moisture sensing transmitter directly on the user's underwear or diaper, or under a thin sheet in the bed, ensuring the sensing area is in direct contact with the potential wetness zone.
    • For toilet training: The sensor is primarily for bed-wetting detection. For timed toilet training, the wrist unit functions independently.
  4. Pairing (Automatic): The wireless wrist unit and sensor are typically pre-paired at the factory. Upon powering on both devices, they should automatically connect. If connection issues occur, refer to the Troubleshooting section.
Child wearing the JYX-738 wrist unit with sensor placed on bed

Figure 2: Proper placement of the wrist unit and sensor for bed-wetting detection.

4. Operating Instructions

  1. Power On/Off: Use the Power Switch on both the wrist unit and the sensor to turn them on or off.
  2. Selecting Alarm Mode (Wrist Unit):

    Press the 'Mode Key' on the wrist unit to cycle through the available alarm modes:

    • Ring Mode: Audio alarm only.
    • Vibration Mode: Silent vibration alarm only.
    • Sound+Vibration Mode: Both audio and vibration alarms.
    • Light Mode: The indicator light will flash (often combined with other modes).

    Choose the mode most suitable for the user's needs and sensitivity.

  3. Setting Timed Reminders (Toilet Training):

    The wrist unit can be set to remind the user to go to the toilet at regular intervals. Press the 'Timing Button' to select from the following options:

    • 30 minutes
    • 60 minutes
    • 90 minutes
    • 120 minutes (2H)

    Once a timing interval is selected, the device will provide a reminder (light, vibration, music, or combination based on selected alarm mode) at the end of each interval.

    Child standing near a toilet, illustrating timed reminders for toilet training

    Figure 3: Timed reminders assist in regular toilet visits.

  4. Child Lock Function: Activate the 'Child Lock' feature on the wrist unit to prevent accidental changes to settings by the user. Refer to Figure 1 for the child lock icon.
  5. Urine Alarm Activation: When the urine moisture sensing transmitter detects wetness, it will send a signal to the wrist unit, triggering the selected alarm mode (light, vibration, music).

5. Maintenance and Care

  • Cleaning:
    • Wipe the wrist unit and sensor with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
    • Ensure the sensor's moisture detection area is clean and free of debris for optimal performance.
  • Water Resistance: The wrist unit is rated IP65 waterproof, meaning it is protected against dust and low-pressure water jets. It can withstand hand washing but should not be submerged in water. The sensor's water resistance is designed for detecting moisture, but it should also not be submerged or exposed to high-pressure water.
  • Child washing hands while wearing the IP65 waterproof wrist unit

    Figure 4: The wrist unit is IP65 waterproof, suitable for activities like hand washing.

  • Storage: Store the device in a cool, dry place when not in use.
  • Battery Care: Recharge the devices regularly to maintain battery health. Avoid completely draining the battery frequently.

6. Troubleshooting

ProblemPossible CauseSolution
Device not turning on.Low battery; Power switch off.Charge the device fully. Ensure the power switch is in the 'On' position.
Alarm not triggering when wet.Sensor not properly placed; Sensor dirty; Sensor or wrist unit not powered on; Devices not paired.Ensure sensor's detection area is in direct contact with wetness. Clean the sensor. Check power. If issues persist, try turning both devices off and on again to re-establish connection.
False alarms.Sensor exposed to moisture (e.g., sweat, condensation) not related to urine; Sensor faulty.Ensure sensor is only exposed to urine. Check sensor for damage.
Timed reminder not working.Timing function not activated; Child lock engaged.Press the 'Timing Button' to select an interval. Deactivate 'Child Lock' if necessary.

7. Specifications

FeatureDetail
ModelJYX-738
TypeWireless Bed-Wetting Urine Alarm & Toilet Trainer
Alarm ModesLight, Vibration, Music (selectable combinations)
Timed Reminders30, 60, 90, 120 minutes (2H)
Water Resistance (Wrist Unit)IP65 (Protected against dust and low-pressure water jets)
ComponentsWrist Unit, Urine Moisture Sensing Transmitter
OriginMainland China

8. User Tips

Consistent use is key for effective training. Here are some tips for best results:

  • Patience is Crucial: Toilet training and overcoming bed-wetting can take time. Be patient and consistent with the training regimen.
  • Positive Reinforcement: Encourage and praise progress, no matter how small.
  • Nighttime Use: For bed-wetting, ensure the sensor is correctly positioned to detect the first drops of urine, allowing the alarm to wake the user promptly.
  • Daytime Training: Utilize the timed reminder function during the day to establish a regular toilet schedule.
  • Hygiene: Always clean the sensor after each use to maintain hygiene and ensure accurate detection.

Note: No specific user reviews or Q&A were provided for this product, so these tips are general recommendations based on product functionality.

9. Warranty and Support

For any questions, technical support, or warranty claims, please contact the seller or retailer from whom you purchased this product. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.