1. Introduction
The UGREEN HDMI 2.1 Switcher is designed to expand your display's HDMI input capabilities, allowing you to connect up to three HDMI source devices to a single HDMI display. This device supports the latest HDMI 2.1 specifications, delivering an unparalleled visual and audio experience with resolutions up to 8K@60Hz and 4K@120Hz. It is ideal for gamers, home theater enthusiasts, and professionals requiring high-performance video switching.

2. Package Contents
Please check the package carefully to ensure all items are present:
- 1 x UGREEN HDMI Switch 3 In 1 Out
- 1 x USB to DC Cable (1.5m/4.9ft)
- 1 x Remote Control
- 1 x User Manual

3. Product Overview
Key Features:
- HDMI 2.1 Compliance: Supports the latest HDMI 2.1 standard.
- High Resolution: Delivers stunning 8K Ultra HD at 60Hz and 4K at 120Hz, with backward compatibility for lower resolutions.
- High Refresh Rate: Enjoy smooth, fluid visuals with support for 240Hz refresh rates, Variable Refresh Rate (VRR), Quick Media Switching (QMS), and Auto Low Latency Mode (ALLM) for an enhanced gaming experience.
- Dynamic HDR & 3D Vision: Experience intensely deep colors, super-fine details, and immersive 3D content.
- Dolby Atmos Audio: Supports LPCM/DTS/DSD/5.1/7.1 and other audio formats for theater-level surround sound.
- High Bandwidth: 48Gbps bandwidth ensures no delay or compression for high-quality signals.
- Intelligent Chip: Equipped with a high-performance intelligent chip for fast and reliable screen switching.

Design and Build:
- Metal Shell: Provides durability and good heat dissipation for stable performance.
- Nickel-Plated Interface: Ensures oxidation resistance and stable signal transmission.
- Silicone Mats: Offers a firm and non-slip base for stability.
- LED Indicator: Clearly shows which HDMI input channel is currently active.

4. Setup Instructions
Follow these steps to connect your UGREEN HDMI Switcher:
- Connect Input Devices: Connect your HDMI source devices (e.g., PS4/5, Xbox, Nintendo Switch, Laptop, PC, TV box) to the HDMI IN 1, HDMI IN 2, and HDMI IN 3 ports on the switcher using HDMI 2.1 compatible cables.
- Connect to Display: Connect the HDMI OUT port of the switcher to your display device (e.g., Monitor, HDTV, Projector) using an HDMI 2.1 compatible cable.
- Power Connection: Connect the provided USB to DC 5V/1A cable to the DC 5V port on the switcher and plug the USB end into a suitable power source (e.g., a USB wall adapter, TV USB port). This power connection is crucial for stable operation, especially with high-resolution signals.


5. Operating Instructions
The UGREEN HDMI Switcher offers two convenient ways to switch between your connected devices:
Manual Switching:
Press the circular button on the top of the HDMI switcher to cycle through the HDMI input sources (HDMI IN 1, HDMI IN 2, HDMI IN 3). The blue LED indicator will illuminate next to the active input number.
Remote Control Switching:
Use the included remote control for convenient switching from a distance. Point the remote control towards the IR receiver on the switcher and press the corresponding number button (1, 2, or 3) to select your desired input source. The "Next" button can also be used to cycle through inputs.


Demonstration of the UGREEN HDMI 2.1 Switcher in action, highlighting its 3-in-1-out functionality and remote switching.
6. Maintenance
To ensure the longevity and optimal performance of your UGREEN HDMI Switcher, please follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the device. Avoid using liquid cleaners or aerosols, as they may damage the unit.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Handle the device with care. Avoid dropping it or subjecting it to strong impacts.
- Cable Management: Ensure HDMI cables are not excessively bent or strained, which can lead to signal degradation.
- Ventilation: The metal shell is designed for heat dissipation; ensure the device is placed in an area with adequate airflow.
7. Troubleshooting
If you encounter issues with your HDMI Switcher, please refer to the following common problems and solutions:
- No Signal or Intermittent Signal:
- Ensure all HDMI cables are securely connected to both the source devices, the switcher, and the display.
- Verify that the DC 5V power adapter is correctly connected and providing power to the switcher. High-resolution signals require stable power.
- Check the quality and length of your HDMI cables. For 8K@60Hz or 4K@120Hz, high-quality HDMI 2.1 certified cables are recommended. Refer to the cable length guidelines in the specifications section.
- Try a different HDMI cable or port to rule out faulty cables or ports.
- Restart all connected devices (source, switcher, display).
- Screen Flashing or Flickering:
- This can often be caused by insufficient power or poor cable quality. Ensure the DC 5V power supply is connected and use high-quality, appropriate length HDMI cables.
- Check if the resolution and refresh rate settings on your source device are compatible with your display and the HDMI switcher.
- Automatic Switching (HDMI CEC):
- This HDMI switcher primarily relies on manual or remote control switching. While some devices may attempt CEC, consistent automatic switching across all devices is not guaranteed as CEC implementation varies widely.
- Remote Control Not Working:
- Ensure there are no obstructions between the remote control and the IR receiver on the switcher.
- Check and replace the battery in the remote control if necessary.
- Make sure you are pointing the remote directly at the IR receiver.

8. Specifications
| Feature | Detail |
|---|---|
| Model Number | CM624(15604) |
| Brand Name | UGREEN |
| Type | HDMI-Compatible Cables / Switcher |
| Connector A | HDMI-Compatible (Input) |
| Connector B | HDMI-Compatible (Output) |
| Input Ports | 3 x HDMI, 1 x IR |
| Output Ports | 1 x HDMI |
| Resolution Support | 8K@60Hz, 4K@120Hz, 4K@144Hz, 2K@240Hz, 1080P@240Hz (backward compatible) |
| Transmission Bandwidth | 48Gbps |
| Features | HDMI-Compatible 2.1, Dynamic HDR, 3D Vision, 12Bit Color Depth, VRR, QMS, ALLM, Dolby Atmos |
| Switching Mode | Button / Remote Control |
| Power Supply | DC 5V/1A (via USB to DC cable) |
| Compatible Systems | Windows / macOS / Linux |
| Application | Computer, Monitor, Projector, Television, TV box, PS4/5, Xbox, Nintendo Switch |
| Shielding | Braid |
| Certifications | CE, FCC |
| Dimensions (L x W x H) | 108.2mm x 54.9mm x 19.70mm |


9. User Tips
- Cable Quality Matters: For optimal performance, especially with 8K@60Hz or 4K@120Hz, always use certified HDMI 2.1 cables of appropriate length and wire gauge. Shorter, thicker cables (e.g., 30AWG for up to 3m) are generally better for high bandwidth.
- Power Supply is Key: Ensure the DC 5V power cable is always connected. This provides the necessary power for stable signal processing, preventing issues like screen flickering or signal loss, particularly with demanding resolutions.
- Understand Input/Output: This device is a "3 In 1 Out" switch, meaning it connects three source devices to one display. It cannot split one source to multiple displays simultaneously.
- Gaming Performance: The support for VRR, QMS, and ALLM makes this switch excellent for gaming consoles like PS5 and Xbox, ensuring a smooth and responsive experience.
10. Warranty and Support
UGREEN products come with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the official UGREEN website or contact their customer service directly. Keep your purchase receipt for warranty claims.