SHIMANO ST-R7170

Contents

SHIMANO 105 Di2 Hydraulic Disc Brake DUAL CONTROL LEVER ST-R7170 (2x12-speed)

User Instruction Manual

1. Product Overview

The SHIMANO 105 Di2 ST-R7170 Dual Control Levers are high-performance components designed for road bicycles, integrating hydraulic disc braking and 2x12-speed electronic shifting. These levers offer a clean cockpit aesthetic through wireless connection and provide compact, ergonomic performance derived from the DURA-ACE series.

SHIMANO 105 Di2 Hydraulic Disc Brake Dual Control Levers (Pair)

Figure 1: SHIMANO 105 Di2 ST-R7170 Dual Control Levers (Pair)

Key Features:

  • Wireless Connection: Enhances bike aesthetics and provides fast, responsive shifting.
  • Hydraulic Disc Brake System: Offers superior stopping power and modulation in all conditions.
  • 2x12-speed Shifting: Compatible with 2-speed front and 12-speed rear drivetrains.
  • Compact & Ergonomic Design: Optimized for comfortable hand positioning and control, inspired by DURA-ACE.
  • Reach Adjust: Allows customization of lever reach to fit individual hand sizes and preferences.
SHIMANO 105 Di2 Levers with Technologies (DCL, E-tube, Reach Adjust)

Figure 2: Key Technologies: DCL (Dual Control Lever), E-tube, Reach Adjust

2. Setup and Installation

Installation of the SHIMANO 105 Di2 ST-R7170 levers requires specialized tools and knowledge of hydraulic brake systems and electronic shifting. It is highly recommended that installation be performed by a qualified bicycle mechanic.

2.1 Components Check:

Ensure you have the following components:

  • ST-R7170-L (Left Dual Control Lever)
  • ST-R7170-R (Right Dual Control Lever)
  • Hydraulic brake calipers (compatible with ST-R7170)
  • Hydraulic brake hoses and fluid
  • Di2 wires/wireless unit (for electronic shifting)
  • Handlebar and appropriate mounting hardware
SHIMANO 105 Di2 Left Dual Control Lever (ST-R7170-L)

Figure 3: ST-R7170-L (Left Lever)

SHIMANO 105 Di2 Right Dual Control Lever (ST-R7170-R)

Figure 4: ST-R7170-R (Right Lever)

  1. Mount Levers: Securely mount the ST-R7170 levers onto your handlebar in the desired ergonomic position.
  2. Connect Hydraulic Hoses: Connect the hydraulic brake hoses from the calipers to the levers. Ensure all connections are tight and properly sealed.
  3. Bleed Hydraulic System: Perform a thorough bleed of the hydraulic brake system to remove any air bubbles and ensure proper brake function. Use appropriate Shimano mineral oil.
  4. Connect Di2 Wires/Wireless Unit: Connect the Di2 shifting wires or pair the wireless unit according to Shimano's official Di2 installation guide.
  5. Adjust Reach: Use the reach adjust mechanism on each lever to set the optimal distance from the handlebar to the lever blade for comfortable braking and shifting.
  6. Function Test: Test both braking and shifting functions thoroughly before riding.

3. Operating Instructions

The ST-R7170 levers combine braking and electronic shifting into a single unit, offering intuitive control.

3.1 Braking:

  • To apply the brakes, pull the lever blade towards the handlebar.
  • The hydraulic disc brake system provides powerful and consistent braking performance. Apply pressure gradually for smooth deceleration.

3.2 Shifting (2x12-speed Di2):

The electronic shifting system operates with precision and speed. Each lever has two buttons for shifting.

  • Right Lever (Rear Derailleur):
    • Press the inner button to shift to a larger cog (easier gear).
    • Press the outer button to shift to a smaller cog (harder gear).
  • Left Lever (Front Derailleur):
    • Press the inner button to shift to the smaller chainring.
    • Press the outer button to shift to the larger chainring.

The Di2 system can be customized for shifting preferences (e.g., synchronized shifting) via the E-tube Project application.

4. Maintenance

Regular maintenance ensures optimal performance and longevity of your SHIMANO 105 Di2 ST-R7170 levers.

4.1 Cleaning:

  • Wipe down the levers and hoods with a damp cloth after each ride, especially in wet or dirty conditions.
  • Avoid using harsh chemicals or solvents that could damage the plastic or rubber components.

4.2 Hydraulic System:

  • Check brake pads regularly for wear and replace as needed.
  • Inspect brake hoses for any signs of damage or leaks.
  • Periodically check brake fluid level and bleed the system if braking performance degrades or feels spongy. This should be done by a qualified mechanic.

4.3 Electronic System:

  • Ensure the Di2 battery is charged regularly.
  • Check all wire connections for security and cleanliness.
  • Update firmware using the E-tube Project software as recommended by Shimano.

5. Troubleshooting

Here are some common issues and their potential solutions:

5.1 Shifting Issues:

  • No Shifting Response:
    • Check Di2 battery charge level.
    • Ensure all Di2 wires are securely connected.
    • Check for any error codes on the Di2 junction box (if applicable).
  • Slow or Inconsistent Shifting:
    • Check for firmware updates using E-tube Project.
    • Inspect derailleur alignment and limit screw settings.

5.2 Braking Issues:

  • Spongy Brake Lever:
    • Air in the hydraulic system. The system needs to be bled by a qualified mechanic.
    • Low brake fluid level.
  • Reduced Braking Power:
    • Worn brake pads. Replace them.
    • Contaminated brake pads or rotor. Clean or replace as necessary.
    • Improperly bled system.

6. Specifications

Feature Specification
Brand SHIMANO
Series 105 Di2 (R7100 Series)
Model ST-R7170 (ST-R7170-L, ST-R7170-R)
Speed 2x12-speed
Brake Type Hydraulic Disc Brake
Shifter Type Electronic (Di2)
Connection Wireless
Origin Japan
Package Weight 0.9 kg
Package Dimensions 30 x 30 x 25 cm
SHIMANO R7100 Series components banner

Figure 5: SHIMANO R7100 Series Overview

7. User Tips

  • Disc Brake Compatibility: These levers are specifically designed for hydraulic disc brakes, not rim brakes. Ensure your bike has a compatible disc brake system.
  • Ergonomics: Take advantage of the reach adjust feature to fine-tune the lever position for maximum comfort and control, especially on long rides.
  • Di2 Customization: Use the Shimano E-tube Project app to customize shifting patterns, button functions, and check battery status.
  • Professional Installation: Due to the complexity of hydraulic brakes and electronic shifting, professional installation is highly recommended to ensure safety and optimal performance.

8. Warranty and Support

For warranty information, please refer to the official SHIMANO warranty policy provided with your purchase or visit the official SHIMANO website. For technical support or service, contact your authorized SHIMANO dealer or the seller from whom you purchased the product.

Always ensure that any repairs or servicing of the hydraulic brake system or Di2 electronic components are performed by a certified technician to maintain safety and product integrity.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.