Geneva 047536

Contents

Geneva Quartz Wristwatch User Manual

Model: 047536

Thank you for choosing a Geneva Quartz Wristwatch. This manual provides essential information for the proper setup, operation, and care of your new timepiece.

1. Safety Information

Please read and understand the following safety precautions before using your watch:

  • Avoid exposing the watch to extreme temperatures (hot or cold) or sudden temperature changes.
  • Keep the watch away from strong magnetic fields, as this can affect the accuracy of the quartz movement.
  • Do not expose the watch to harsh chemicals, solvents, or detergents, as these can damage the case, band, or internal components.
  • This watch is not waterproof. Avoid contact with water, including showering, swimming, or heavy rain.
  • Handle the watch with care to prevent impacts or drops that could damage the glass or internal mechanism.

2. Package Contents

Your Geneva Quartz Wristwatch package should contain:

  • 1 x Geneva Quartz Wristwatch (Model 047536)

3. Specifications

Front view of Geneva Quartz Wristwatch with black dial and blue markers

Figure 3.1: Front view of the Geneva Quartz Wristwatch.

FeatureDescription
Model Number047536
Item TypeQuartz Wristwatches
MovementQuartz
Display TypeNumberless
Case MaterialAlloy
Case ShapeRound
Case Thickness9mm
Dial Window Material TypeGlass
Band Material TypeStainless Steel (Mesh Band)
Band Length23cm
Clasp TypeBuckle
Water Resistance DepthNo Waterproof
Battery IncludedYes
StyleFashion & Casual
OriginMainland China
CertificationNONE
Package Weight0.05 kg
Package Dimensions8cm x 7cm x 6cm

4. Setup

4.1 Setting the Time

Side view of watch showing the crown

Figure 4.1: Watch with crown for time adjustment.

  1. Locate the crown (the small knob on the right side of the watch case).
  2. Gently pull the crown outwards to the time-setting position.
  3. Turn the crown clockwise or counter-clockwise to adjust the hour and minute hands to the correct time.
  4. Once the time is set, push the crown back into its original position to start the watch movement.

4.2 Adjusting the Mesh Band

The stainless steel mesh band features an adjustable clasp for a comfortable fit. To adjust:

  1. Open the safety clasp on the buckle.
  2. Use a small, flat tool (like a small screwdriver or a watch tool) to lift the locking plate on the main clasp mechanism.
  3. Slide the clasp along the mesh band to the desired length.
  4. Press the locking plate back down firmly to secure the clasp in place.
  5. Close the safety clasp. Ensure the band is securely fastened before wearing.

5. Operating Instructions

Video 5.1: Product showcase video demonstrating the watch's appearance and wear.

Once the time is set and the band is adjusted, your watch is ready to wear. The quartz movement provides accurate timekeeping with minimal maintenance.

  • Wear the watch comfortably on your wrist.
  • Check the time regularly and reset if necessary (though quartz movements are highly accurate).

6. Maintenance

6.1 Cleaning

To maintain the appearance of your watch:

  • Wipe the watch case and band regularly with a soft, dry cloth.
  • For stubborn dirt, a slightly damp cloth can be used, but ensure no water enters the watch. Dry immediately.
  • Avoid using abrasive cleaners or harsh chemicals.

6.2 Water Resistance

This watch is labeled as "No Waterproof." This means it is not designed to withstand any contact with water. Please take precautions to avoid:

  • Washing hands with the watch on.
  • Showering or bathing with the watch.
  • Swimming or diving.
  • Exposure to rain or splashes.

Water damage is not covered under warranty.

6.3 Battery Replacement

Your watch is powered by a quartz battery. When the watch stops running, the battery will need to be replaced. It is recommended to have the battery replaced by a professional watch technician to ensure the case is properly sealed and to prevent damage to the movement.

7. Troubleshooting

If you encounter issues with your watch, please refer to the following common problems and solutions:

  • Watch not running:
    - Check if the crown is pushed all the way in. If it's pulled out, the watch will not run.
    - The battery may be depleted. Consider professional battery replacement.
  • Time is inaccurate:
    - Ensure the crown is fully pushed in after setting the time.
    - The watch may have been exposed to a strong magnetic field. Move it away from magnetic sources.
    - If the inaccuracy persists, the movement may require servicing by a professional.
  • Band feels loose or too tight:
    - Re-adjust the mesh band clasp as described in Section 4.2.

For issues not covered here, please contact customer support.

8. User Tips

  • To prolong the life of your watch, store it in a dry place away from direct sunlight and extreme temperatures when not in use.
  • Regularly check the clasp for security, especially after adjusting the band, to prevent accidental loss.
  • While the watch is designed for fashion and casual wear, avoid wearing it during strenuous activities that could lead to impacts or excessive moisture exposure.

9. Warranty and Support

For any questions, concerns, or support regarding your Geneva Quartz Wristwatch, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.