1. Introduction
The Staniot 7-inch HD Alarm System is a comprehensive wireless security solution designed to protect your home. Featuring a high-resolution touch screen, WiFi and 4G connectivity, and integration with Tuya Smart Home platform, it offers advanced monitoring and control capabilities. This manual provides detailed instructions for setting up, operating, and maintaining your security system.

2. Key Features
- 7-inch IPS Full-color HD Touch Screen (1024x600px)
- Anti-fingerprint Touch Screen for easy operation
- Built-in 115dB Siren & Buzzer
- 5000mAh Built-in Lithium Battery with up to 32 hours standby time
- Wireless WiFi and 4G Mobile System connectivity
- Tuya Smart Home Platform integration
- APP Remote Control for arming/disarming and real-time monitoring
- Voice Control compatibility with Alexa and Google Assistant
- Support for 150 accessories (sensors and controllers)
- 8 Wired Zones for traditional wired sensors
- OTA (Over-The-Air) Online Upgrade for continuous system optimization
- Multi-language support (10 languages including English, Spanish, French, German, etc.)
- Ability to set 5 alarm phone numbers for calls and SMS alerts
- Versatile installation: wall-mounted or desktop placement
3. Product Parameters

| Parameter | Value |
|---|---|
| Input Power | DC12V 1A external cable, DC5V 2A Type-C USB |
| Built-in Battery | 3.7V 5000mAh lithium battery |
| Working Power Consumption | <5W |
| Working Temperature | -10°C ~ +50°C |
| Relative Humidity | <95% (no condensation) |
| Wireless Parameters | 433MHz, EV1527 |
| Mobile System | 4G |
| WiFi Standard | IEEE802.11b/g/n 2.4G band |
| Product Size | 183mm × 135mm × 18mm |
Note: DC 12V/1A and Type-C 5V/2A charging ports cannot be connected simultaneously. The DC 12V/1A port and 8 wired sensors are suitable for installations with pre-installed embedded lines.

4. Setup Instructions
4.1 Initial Panel Setup
- Install SIM Card: Open the back cover of the alarm panel. Locate the Nano SIM Card Slot and insert your 4G SIM card. Ensure the battery switch is in the OFF position before inserting/removing the SIM card.
- Power Connection: Connect the alarm panel to a power source using either the Type-C 5V 2A USB interface or the DC12V 1A external cable.
- Power On: Turn on the battery switch. The panel will boot up and display a 'Welcome' screen.
- Language Selection: Follow the on-screen prompts to select your preferred language. The system supports 10 languages.
4.2 App Connection (WiFi Setup)
- Download App: Scan the QR code displayed on the panel for iOS or Android to download the Tuya Smart Life app.
- Prepare for Airlink: On your phone, ensure Bluetooth is turned on and connect your phone to a 2.4G WiFi network.
- Initiate Airlink: On the alarm panel, navigate to 'WiFi setup' and tap the 'Airlink' button. Confirm the WiFi reset if prompted. The panel will start a countdown for setup.
- Add Device in App: Open the Tuya Smart Life app on your phone. The app should discover the 'Smart Security Panel'. Tap 'Add Device' and follow the in-app instructions to complete the connection.

4.3 Adding Accessories (Sensors & Controllers)
The system supports up to 150 wireless accessories (433MHz, EV1527 type) and 8 wired zones.
- Accessory Menu: On the panel, navigate to 'Add accessories'. You can choose to 'Add a sensor' or 'Add a controller'.
- Pairing Sensors:
- Select 'Add a sensor'.
- Choose the sensor type (e.g., Entry Sensor for door/window sensors, Motion for motion detectors).
- Set the sensor's mode (Away, Home, Always) and enable/disable alarm delay, entry chime, or opened warning as needed.
- Tap '+ Pair'. The panel will prompt you to 'Please trigger accessories'.
- Activate the sensor (e.g., separate the two parts of a door/window sensor, or trigger a motion sensor). The panel will confirm 'Pair ok'.
- Pairing Controllers:
- Select 'Add a controller'.
- Tap '+ Pair'. The panel will prompt you to 'Please trigger accessories'.
- Press any button on the remote control. The panel will confirm 'Pair ok'.

5. Operating Instructions
5.1 Arming and Disarming
You can arm or disarm your system using the panel, remote control, or the mobile app.
- Panel: Tap 'Away' to arm, 'Disarm' to disarm, or 'Home' for home arming mode.
- Remote Control: Press the corresponding buttons on your remote control for Away arming, Home arming, or Disarm.
- Mobile App: Use the Tuya Smart Life app to remotely arm or disarm the system.


5.2 SOS Function
In case of emergency, press the SOS button on the panel or remote control to trigger an immediate alarm. The system will activate the siren and send alerts to the preset emergency contacts.

5.3 Alarm Notifications
When an alarm is triggered, the system will:
- Activate the built-in 115dB siren.
- Send SMS alerts to up to 5 preset phone numbers.
- Call the 5 preset phone numbers one by one.

5.4 Voice Control
The Staniot alarm system is compatible with Alexa and Google Assistant. After setting up in the app and binding with your voice assistant device, you can use voice commands to arm and disarm the system.
Note: A PIN code is required when disarming the device via voice command, which is preset in the Alexa/Google app.

6. Maintenance
6.1 Battery Management
The alarm panel has a built-in 5000mAh lithium battery, providing up to 32 hours of standby time. Ensure the panel is regularly charged to maintain optimal performance. In case of power outage, the battery acts as a backup.
6.2 OTA Online Upgrade
The system supports Over-The-Air (OTA) online upgrades. This allows for continuous optimization, new features, and bug fixes without extra fees or contracts. When an update is available, follow the on-screen prompts to download and install it. Do not operate the device during the update process.

6.3 Cleaning
The 7-inch HD touch screen features an anti-fingerprint coating. To clean, gently wipe the screen with a soft, dry, lint-free cloth. Avoid using harsh chemicals or abrasive materials.

7. Troubleshooting
- WiFi Connection Issues: Ensure your phone's Bluetooth is on and connected to a 2.4G WiFi network during Airlink setup. If prompted, confirm the WiFi reset on the panel.
- Sensor/Controller Pairing Failure: When pairing, ensure you trigger the accessory (e.g., open/close a door sensor, press a button on the remote) within the countdown period. If pairing fails, try again, ensuring the accessory is close to the panel.
- Alarm Volume: The internal alarm volume can be adjusted through the system settings on the panel.
- Forgot Code: If you forget your system code, refer to the 'User manual' or 'Support' sections accessible via QR codes on the panel's tutorial screen for recovery options.
- SIM Card Not Working: Ensure the SIM card is correctly inserted and activated with a 4G plan. Check the signal strength indicator on the panel.
- Compatibility with Tuya Sensors: The system is compatible with Tuya motion sensors and other Tuya-enabled devices. Ensure they operate on 433MHz, EV1527 frequency for direct pairing with the panel.
8. User Tips
- Easy Setup: Users have praised the system for its intuitive and easy setup process. Follow the on-screen tutorials for a smooth experience.
- Versatile Use: The system is effective for various applications, including securing main residences and remote locations like garden sheds.
- Accessory Selection: The system supports a wide selection of accessories, allowing for a customized security setup.
- Check SIM Card: For 4G functionality, ensure your SIM card is properly installed and has an active data plan.
- Volume Control: If the internal siren is too loud, adjust its volume in the system settings.
9. Warranty and Support
For any technical assistance, warranty claims, or further inquiries, please contact Staniot support. You can find contact information, including an email address, by scanning the 'Support' QR code on the panel's tutorial screen.
Email: support@staniot.com