Introduction
Thank you for choosing the T&G TG116C Bluetooth Speaker. This portable wireless speaker is designed to deliver powerful sound with features like Bluetooth 5.0 connectivity, FM radio, MP3 playback via USB and TF card, hands-free calling, and IPX5 waterproof rating. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your speaker to ensure optimal performance and longevity.
Safety Information
- Do not expose the speaker to extreme temperatures or direct sunlight for prolonged periods.
- Avoid dropping or subjecting the speaker to strong impacts.
- Keep the speaker away from medical devices to prevent interference.
- Do not attempt to disassemble or repair the speaker yourself. Refer to qualified service personnel.
- Ensure the charging port is dry before connecting the charging cable.
Product Overview
The T&G TG116C is a compact yet powerful portable Bluetooth speaker. It features a robust design with a convenient carrying handle and intuitive controls on the top panel.


Controls and Ports

- DC 5V Charging Interface: For charging the speaker.
- TF Card Input Interface: For playing music from a MicroSD/TF card.
- USB Flash Drive Input Interface: For playing music from a USB drive.
- LINE IN Input Interface: For connecting external audio devices via a 3.5mm AUX cable.
- Power Switch: Turns the speaker on/off.
- Mode Button (M): Switches between Bluetooth, FM Radio, TF Card, USB, and AUX modes.
- Play/Pause Button: Plays or pauses music. In call mode, answers/ends calls.
- Previous Track / Volume Down Button (-): Short press for previous track, long press to decrease volume.
- Next Track / Volume Up Button (+): Short press for next track, long press to increase volume.
Setup
1. Charging the Speaker
Before first use, fully charge the speaker. Connect the provided USB charging cable to the DC 5V charging interface on the speaker and the other end to a USB power adapter (not included) or a computer USB port. The charging time is approximately 3-4 hours.

2. Powering On/Off
Press and hold the Power Switch button to turn the speaker on or off.
3. Bluetooth Pairing
- Turn on the speaker. It will automatically enter Bluetooth pairing mode, indicated by a flashing LED light (if present).
- On your mobile device (phone, tablet, laptop), go to Bluetooth settings.
- Search for available devices and select "TG116C" from the list.
- Once connected, the speaker will emit a confirmation sound, and the LED light will stop flashing.

Operating Instructions
Mode Switching
Press the 'M' (Mode) button to cycle through available modes: Bluetooth, FM Radio, TF Card, USB Flash Drive, and LINE IN (AUX).
Bluetooth Mode
- After successful pairing, you can play music from your connected device.
- Press the Play/Pause button to play or pause music.
- Short press '-' for the previous track, short press '+' for the next track.
- Long press '-' to decrease volume, long press '+' to increase volume.
Hands-Free Calling
When connected via Bluetooth, the speaker supports hands-free calls:
- Music will automatically pause when an incoming call is received.
- Press the Play/Pause button once to answer an incoming call.
- Press the Play/Pause button again to end the call.
- The built-in HD noise reduction microphone ensures clear voice chat.

FM Radio Mode
- Switch to FM Radio mode using the 'M' button.
- Press and hold the Play/Pause button to automatically scan and save available FM stations.
- Short press '-' or '+' to switch between saved stations.
TF Card / USB Flash Drive Mode
Insert a TF card or USB flash drive (with MP3 audio files) into the respective port. The speaker will automatically detect the storage and begin playback. Use the Play/Pause, Previous/Next Track, and Volume buttons as in Bluetooth mode.
LINE IN (AUX) Mode
Connect an external audio device (e.g., MP3 player, computer) to the LINE IN port using a 3.5mm audio cable. Switch to LINE IN mode using the 'M' button. Audio playback will be controlled from your external device.
True Wireless Stereo (TWS) Function
The TWS function allows you to connect two TG116C speakers together for a stereo sound experience.
- Ensure both speakers are turned on and not connected to any Bluetooth device.
- On one speaker, press and hold the 'M' button until you hear a pairing tone. This speaker will be the primary unit.
- The two speakers will automatically connect to each other.
- Once connected, pair your mobile device to the primary speaker via Bluetooth as usual.
- Audio will now play in stereo across both speakers.

Maintenance
Cleaning
The TG116C speaker features an IPX5 waterproof splash design. This means it is resistant to splashes and light rain. You can clean it directly with tap water if it gets dirty, but do not submerge it in water.

Storage
Store the speaker in a cool, dry place when not in use. Avoid storing it in areas with high humidity or extreme temperatures.
Troubleshooting
- Speaker does not turn on: Ensure the battery is charged. Connect the speaker to a power source using the USB cable.
- Cannot pair via Bluetooth:
- Make sure the speaker is in Bluetooth pairing mode (flashing LED).
- Ensure Bluetooth is enabled on your device and it is within 10 meters of the speaker.
- Forget "TG116C" from your device's Bluetooth list and try pairing again.
- Restart both the speaker and your device.
- No sound:
- Check the volume levels on both the speaker and your connected device.
- Ensure the correct mode (Bluetooth, AUX, TF, USB) is selected.
- If using TF card or USB, ensure the audio files are in a supported format (e.g., MP3).
- Poor FM radio reception: Try repositioning the speaker to improve signal reception.
- TWS pairing fails: Ensure both speakers are not connected to any other Bluetooth device before attempting TWS pairing. Try turning both speakers off and on again.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | T&G |
| Model | TG116C |
| Speaker Type | Portable |
| Communication | USB, Bluetooth |
| Bluetooth Version | 5.0 |
| Wireless Range | <10m |
| Audio Crossover | Full-Range |
| Number of Loudspeaker Enclosure | 1 |
| Channels | 1 |
| Input Power | 25-49 W |
| Power Source | Battery, USB |
| Battery Capacity | 1200mAh |
| Playback Time (2/3 volume) | 6-8 hours |
| Charging Time | 3-4 hours |
| Frequency Range | 100Hz-20KHz |
| Sensitivity | 90dB |
| Codecs | sbc, AAC |
| Waterproof | Yes (IPX5) |
| Built-in Microphone | Yes |
| Support Memory Card | Yes |
| Playback Function | Radio, MP3 |
| Cabinet Material | Plastic |
| Weight | 557g |
| Depth | 80mm |
| Width | 80mm |
| Certifications | CE, FCC, RoHS |
Warranty and Support
This product is covered by standard consumer warranties as per local regulations. For specific warranty details, please refer to the seller's policy or contact their customer support.
AliExpress offers buyer protection, including free returns within 90 days and refunds for issues such as late delivery, lost packages, or damaged items. For more information, please visit the AliExpress platform.
If you encounter any issues or have questions about your T&G TG116C speaker, please contact the seller directly through the AliExpress platform for assistance.