Product Overview
The SKMEI 1611 is a versatile digital wristwatch designed for men, featuring a durable stainless steel band and a zinc alloy case. It offers multiple functions including dual time display, chronograph, alarm, countdown timer, and an LED backlight for visibility in low light conditions. The watch is water-resistant up to 30 meters, suitable for daily use.
Image: Front view of the SKMEI 1611 Digital Watch, displaying time and date.
Video: A demonstration of the SKMEI 1611 watch's features, including backlight, water resistance, and various color options.
Button Functions
The SKMEI 1611 watch features four buttons for operation:
Image: Diagram illustrating the function of each button on the watch.
- LIGHT Button (Top Left): Activates the LED backlight.
- MODE Button (Bottom Left): Cycles through different modes (Time, Chronograph, Alarm, Countdown).
- START/STOP Button (Top Right): Used to start and stop functions in Chronograph and Countdown modes, and to adjust settings.
- RESET Button (Bottom Right): Used to reset functions in Chronograph and Countdown modes, and to adjust settings.
Setup and Time Setting
Setting Time and Date
- From the normal time display, press the MODE button repeatedly until you enter the Time Setting mode (usually indicated by flashing digits).
- Use the START/STOP button to adjust the flashing digit (e.g., hours, minutes, year, month, day).
- Press the RESET button to move to the next setting item.
- Once all settings are adjusted, press the MODE button to exit Time Setting mode and return to the normal time display.
12/24 Hour Format
In Time Setting mode, when the hour digits are flashing, press the START/STOP button to toggle between 12-hour and 24-hour formats.
Operating Instructions
Chronograph (Stopwatch) Mode
- Press the MODE button until "CHRONO" or "STW" appears on the display.
- Press the START/STOP button to start the stopwatch.
- Press the START/STOP button again to stop the stopwatch.
- Press the RESET button to clear the stopwatch to zero.
Alarm Mode
- Press the MODE button until "ALARM" appears on the display.
- Press the START/STOP button to adjust the hour.
- Press the RESET button to move to minutes, then use START/STOP to adjust.
- Press the MODE button to set the alarm.
- To turn the alarm ON/OFF, press the START/STOP button while in Alarm mode. An alarm icon will appear/disappear.
Countdown Timer Mode
- Press the MODE button until "COUNT DOWN" or "TMR" appears on the display.
- Press the START/STOP button to set the countdown time (hours, minutes, seconds).
- Press the RESET button to move to the next setting item.
- Once the time is set, press MODE to confirm.
- Press START/STOP to begin the countdown. Press again to pause/resume.
- Press RESET to stop and reset the countdown.
LED Backlight
Press the LIGHT button (top left) to illuminate the display for a few seconds.
Maintenance and Care
Water Resistance (30M / 3BAR)
This watch is rated for 30 meters (3 BAR) water resistance. This means it is suitable for daily use, such as splashes, rain, and brief immersion in water. It is NOT suitable for showering with hot water, steam, swimming, or diving. Do not operate buttons while the watch is wet or submerged.
Image: Water resistance specifications, indicating suitability for daily use but not for hot water, steam, swimming, or diving.
Cleaning
Wipe the watch regularly with a soft, dry cloth to remove dirt and moisture. For the stainless steel band, a slightly damp cloth can be used, followed by a dry cloth. Avoid using chemical cleaners.
Battery Replacement
The watch uses a CR2025 battery. When the display dims or functions become erratic, it may be time to replace the battery. It is recommended to have battery replacement performed by a qualified watch technician to ensure proper sealing and water resistance.
Image: Close-up of the watch's back cover, indicating "BATTERY CODE CR2025".
Troubleshooting
- Display is blank or dim: Check battery. Replace if necessary.
- Buttons are unresponsive: Ensure the watch is not in a locked mode (if applicable, though not specified for this model). Try a soft reset by holding all buttons for a few seconds (if applicable, consult specific model instructions if available). If issues persist, battery may be low.
- Time is inaccurate: Re-set the time and date following the instructions in the "Setup" section.
- Water inside the watch: Immediately take the watch to a professional for inspection and repair to prevent further damage.
Specifications
| Feature | Detail |
|---|---|
| Brand | SKMEI |
| Model Number | 1611 |
| Display Type | Digital |
| Movement | Digital |
| Case Material | Zinc Alloy |
| Dial Window Material Type | Glass |
| Band Material Type | Stainless Steel |
| Clasp Type | Bracelet Clasp |
| Water Resistance Depth | 3Bar (30 meters) |
| Dial Diameter | 43mm |
| Case Thickness | 12mm |
| Band Width | 20mm |
| Band Length | 22cm (220mm) |
| Weight | 108g |
| Features | Stop Watch, Back Light, LED Display, Luminous, Auto Date, Chronograph, Water-Resistance, Alarm, Week Display, 2 Time, Count Down, 12/24 hour clock |
Image: Detailed product parameters including dimensions and functions.
Warranty and Support
SKMEI watches are designed for durability and functionality. For any issues or support, please refer to the following:
- Quality Assurance: SKMEI guarantees the original quality of its products.
- After-Sales Service: If you encounter any problems within 3 months after receiving the watch, and the damage is not due to human factors, please contact the seller for assistance.
- Returns: Free returns are available within 90 days of purchase.
- Late Delivery: A $1.00 coupon may be available for late delivery.
- Lost/Damaged Package: Refunds are available if the package is lost or items are damaged during transit.
For further inquiries, please contact your point of purchase or the official SKMEI support channels.
