1. Introduction
The Staniot SecPanel 7 H700-4G is an advanced wireless home alarm system designed to provide comprehensive security for your property. Featuring a 7-inch HD IPS full-color touch screen, built-in 115dB siren, and a 5000mAh backup battery, this system offers reliable protection and smart home integration through WiFi and 4G connectivity. It supports a wide range of accessories and can be controlled remotely via a mobile application or voice commands with Alexa and Google Assistant.

Figure 1: Staniot SecPanel 7 Home Alarm System
2. Key Features
- 7-inch HD IPS Full-color Touch Screen: Enjoy a crystal clear visual experience with 1024x600px resolution.
- Built-in 115dB Siren & Buzzer: Loud and penetrating sound to deter intruders.
- 5000mAh Built-in Lithium Battery: Provides backup power for continuous protection.
- Multiple Installation Methods: Can be wall-mounted or placed on a desktop.
- OTA Online Upgrade: Continuous system optimization and new features via timely updates.
- APP Remote Control: Arm/disarm, monitor sensors, and customize settings from your mobile device.
- Voice Control Integration: Compatible with Amazon Alexa and Google Assistant.
- Extensive Accessory Support: Supports up to 150 wireless accessories.
- 8 Wired Zones: For integration with pre-installed wired sensors.
- 10 Built-in Languages: English, Dutch, Spanish, Russian, French, Polish, German, Italian, Portuguese, Chinese.
- Anti-fingerprint Screen: Maintains a clean and clear display.

Figure 2: Key Features Overview
3. Package Contents
Your Staniot SecPanel 7 H700-4G Home Alarm System typically includes the following components. Specific kits may vary:
- Staniot SecPanel 7 H700-4G Alarm Panel
- Power Adapter (DC12V 1A or Type-C 5V 2A)
- Desktop Bracket
- Wireless Door/Window Sensors
- Wireless Motion Sensors
- Remote Controls
- User Manual (this document)
4. Setup Guide
4.1 Physical Installation
The SecPanel 7 offers versatile installation options:
- Desktop Placement: Use the included desktop bracket to place the panel on any flat surface.
- Wall Mounting: The panel can be securely mounted to a wall. Ensure the chosen location provides good WiFi and 4G signal strength.

Figure 3: Versatile Design for Desktop or Wall Mounting
4.2 Power Connection
Connect the alarm panel to a power source using either the DC12V 1A adapter or a Type-C 5V 2A cable. Important: Do not connect both DC12V/1A and Type-C 5V/2A charging ports simultaneously.
4.3 SIM Card Installation
The SecPanel 7 supports a Nano SIM card for 4G connectivity, enabling SMS alerts and alarm calls. To install the SIM card:
- Locate the SIM card slot on the back of the panel.
- Open the protective cover.
- Insert the Nano SIM card into the designated slot, ensuring correct orientation.
- Close the protective cover.
Refer to the product video for a visual guide on SIM card insertion.
Video 1: Staniot SecPanel 7 Product Overview and SIM Card Installation
4.4 Wired Zones and Ports
The back panel of the SecPanel 7 includes 8 wired zones for connecting traditional wired sensors, as well as a speaker, siren, anti-disassembly switch, and battery switch.

Figure 4: Back Panel Diagram with Ports and Features
Note: The DC 12V/1A port and 8 Wired Sensors are suitable for families with pre-installed embedded lines.
4.5 Accessory Pairing
The system supports up to 150 wireless accessories (e.g., door/window sensors, motion sensors, remote controls). Refer to the specific accessory's manual for pairing instructions. Generally, you will put the alarm panel into pairing mode and then activate the accessory to link it.
5. Operating Instructions
5.1 Touch Screen Interface
The 7-inch IPS touch screen provides an intuitive interface for managing your security system. Key functions include:
- Away: Arms the system for when you are leaving your home.
- Disarm: Disarms the system.
- Home: Arms the system for when you are at home (e.g., perimeter protection).
- SOS: Triggers an immediate emergency alarm.
- Settings: Access system configurations.

Figure 5: Main Touch Screen Interface
5.2 APP Remote Control
Download the mobile application (Tuya Smart or Smart Life) to remotely control your alarm system. After connecting the alarm panel to the mobile APP via WiFi, you can:
- Remotely arm or disarm the system.
- View the status of door and window sensors in real-time.
- Modify accessory names for easier identification.
- Receive alarm notifications directly on your phone.

Figure 6: APP Remote Control Interface
5.3 Alarm Phone Numbers and SMS Alerts
You can configure up to five phone numbers in the security panel. In the event of an alarm:
- The security panel will automatically send text messages to these five phone numbers.
- It will then call these phone numbers one by one until answered.

Figure 7: Alarm Notification via Phone Call and SMS
5.4 Voice Control (Alexa & Google Assistant)
The system is compatible with Amazon Alexa and Google Assistant. To use voice control:
- Set up the integration within the mobile APP.
- Bind the alarm system with your Alexa or Google device.
- You can then arm and disarm the security system using voice commands.
Note: A PIN code is required when disarming the device via voice command. This PIN is preset in the Alexa/Google APP settings.

Figure 8: Voice Control with Alexa and Google Assistant
5.5 Language Settings
The SecPanel 7 supports 10 built-in languages. You can change the language through the system settings on the touch screen.

Figure 9: Multi-language Support
6. Maintenance
6.1 Battery Management
The SecPanel 7 features a built-in 5000mAh lithium battery, providing reliable backup power during outages. Ensure the panel is regularly connected to power to keep the battery charged. The battery life of individual wireless sensors will vary depending on usage and environmental factors. The system should alert you when sensor batteries are low.

Figure 10: 5000mAh Built-in Battery
6.2 OTA Online Upgrades
Staniot provides continuous system optimization and new features through Over-The-Air (OTA) online upgrades. When an update is available, you will be notified. Follow the on-screen instructions to perform the upgrade. Ensure the device is connected to a stable power source and network during the update process. No extra fees or contracts are needed for these updates.

Figure 11: OTA Online Upgrade Process
6.3 Cleaning
To clean the anti-fingerprint touch screen, use a soft, lint-free cloth. Avoid abrasive cleaners or harsh chemicals that could damage the screen surface.
7. Troubleshooting
- Sensors Not Connecting/Working:
- Check the battery in the sensor.
- Ensure the sensor is within the wireless range of the main panel.
- Re-pair the sensor with the main panel according to its specific instructions.
- Verify that the sensor's frequency (433MHz) is compatible with the system.
- SIM Card Not Functioning (No SMS/Calls):
- Ensure the SIM card is correctly inserted and unlocked (if applicable).
- Check if the SIM card has an active plan and sufficient balance. (Note: Checking SIM balance directly from the panel might be limited; you may need to temporarily insert it into a phone).
- Verify 4G signal strength in the panel's location.
- False Alarms:
- Review the placement of motion sensors to avoid areas with pets, drafts, or direct sunlight.
- Ensure door/window sensors are properly aligned and securely attached.
- Adjust sensitivity settings for motion sensors if available.
- Wired Siren/Sensors Connection:
- Ensure all wired connections are secure and follow the correct wiring diagram for the 8 wired zones.
- The system supports wired sirens; ensure it is connected to the appropriate output.
- System Unresponsive:
- Try restarting the panel by turning off and on the battery switch on the back.
- If issues persist, perform a factory reset (refer to system settings, note this will erase all configurations).
8. Specifications
| Parameter | Value |
|---|---|
| Model Number | SecPanel 7 H700-4G |
| Brand Name | staniot |
| Display | 7 inch 1024x600px HD IPS Screen |
| Input Power | DC12V 1A (external cable), DC5V 2A (Type-C USB) |
| Built-in Battery | 3.7V/5000mAh lithium battery |
| Working Power Consumption | <5W |
| Working Temperature | -10°C ~ +50°C |
| Relative Humidity | <95% (no condensation) |
| Wireless Parameters | 433MHz, eV1527 |
| Mobile System | 4G |
| WiFi Standard | IEEE802.11b/g/n 2.4G band |
| Zone Number | 150 (wireless) + 8 (wired) |
| Alarm Type | The Alarm, SMS, Apps Control |
| Arming Type | APP |
| Video Interface | Yes |
| Password Keyboard | Yes |
| Smart Home Platform | Tuya |
| Certification | CE, RoHS |
| Product Size | 183mm x 135mm x 18mm |

Figure 12: Product Parameters

Figure 13: Product Dimensions
9. User Tips
- Sensor Range: Users have reported good connectivity in a 350sqm single-story house, indicating a decent range for wireless sensors.
- Wired Siren: It is possible to connect a wired siren to the system for additional alarm output.
- Third-Party Compatibility: The system is based on the Tuya platform, suggesting compatibility with other Tuya-enabled devices and sensors, though specific testing may be required for non-Staniot branded accessories.
- Alarm Zones: The system allows for the creation of specific alarm zones, enabling you to activate or deactivate sensors in particular areas (e.g., only bedroom or garage sensors).
- Sensor Supervision: The central panel can alert you if a connected sensor stops communicating, providing an extra layer of security.
- Disarming Password: The system includes a password feature to disable the alarm, enhancing security against unauthorized access.
10. Warranty and Support
For warranty information, technical support, or any inquiries regarding your Staniot SecPanel 7 H700-4G Home Alarm System, please contact the official Staniot store or authorized reseller where you purchased the product. Ensure you retain your proof of purchase for warranty claims.