DRAGINO LPS8N

Contents

Dragino LPS8N Indoor LoRaWAN Gateway User Manual

Model: LPS8N

Brand: DRAGINO

1. Introduction

The Dragino LPS8N is an open-source indoor LoRaWAN Gateway designed to bridge LoRa wireless networks to an IP network via WiFi or Ethernet. It enables users to send data over extremely long ranges at low data rates, making it ideal for various Internet of Things (IoT) applications.

The gateway utilizes a Semtech packet forwarder and is fully compatible with the LoRaWAN protocol. It incorporates an SX1302/03 LoRa concentrator, providing 10 programmable parallel demodulation paths for efficient data handling.

The LPS8N comes with pre-configured standard LoRaWAN frequency bands for different countries, and users have the flexibility to customize these frequency bands for their specific LoRa network requirements. An optional cellular version is available, offering 3G/4G connectivity for enhanced network flexibility.

2. Product Overview

The LPS8N gateway features essential ports and indicators for easy setup and operation.

Front view of the Dragino LPS8N LoRaWAN Gateway, highlighting power, Ethernet, USB ports, and toggle button.
Figure 1: Front view of LPS8N showing PWR 5V-2A, Ethernet, USB, and Toggle button.
Angled view of the Dragino LPS8N LoRaWAN Gateway with two antennas installed.
Figure 2: Angled view of LPS8N with two antennas.
Front view of the Dragino LPS8N LoRaWAN Gateway with one long and one short antenna.
Figure 3: Front view of LPS8N with one long and one short antenna.
Close-up image of the SIM card slot on the LPS8N gateway.
Figure 4: Close-up of the SIM card slot (for cellular versions).

3. Setup Instructions

  1. Antenna Installation: Carefully screw the provided LoRa and WiFi antennas into their respective connectors on the gateway. Ensure they are finger-tight.
  2. Power Connection: Connect the 5V-2A power adapter to the 'PWR 5V-2A' port on the gateway and plug it into a power outlet. The power indicator LED should light up.
  3. Network Connection:
    • Ethernet (Recommended for initial setup): Connect an RJ45 Ethernet cable from the gateway's Ethernet port to your router or network switch.
    • Diagram showing the LPS8N connected to a router via an RJ45 cable.
      Figure 5: Ethernet connection diagram.
    • WiFi: The LPS8N can operate as a WiFi Access Point (AP) or connect to an existing WiFi network. For initial setup, you may connect to the LPS8N's default WiFi network from your computer.
    • Diagram illustrating the LPS8N gateway creating a WiFi network for connection.
      Figure 6: WiFi network connection from LPS8N.
    • Cellular (Optional for 3G/4G versions): If you have the cellular version, insert a compatible SIM card into the SIM card slot (refer to Figure 4). Ensure the SIM card is correctly oriented.
  4. Initial Configuration: Access the gateway's web interface via its IP address (if connected via Ethernet) or by connecting to its WiFi network and navigating to the default gateway IP (usually 192.168.1.1). Follow the on-screen instructions to configure LoRaWAN parameters, network settings, and any cellular options.

4. Operating the Gateway

The LPS8N acts as a bridge, forwarding LoRaWAN packets from end nodes to a LoRaWAN Network Server (LNS) and vice-versa.

System Overview diagram for the LPS8N, showing connections to Internet, LoRaWAN IoT Server, LoRa End Nodes, and WiFi AP.
Figure 7: LPS8N System Overview and Connectivity.
Diagram illustrating the LPS8N's role in a LoRaWAN IoT Network, showing uplink and downlink communication.
Figure 8: LPS8N in a LoRaWAN IoT Network.

4.1 LoRaWAN Functionality

  • Packet Forwarding: The gateway receives LoRa packets from LoRaWAN end nodes and forwards them to the configured LoRaWAN Network Server via the internet (Ethernet, WiFi, or Cellular).
  • Downlink Communication: It also handles downlink messages from the LNS, transmitting them back to the LoRaWAN end nodes.
  • Frequency Bands: Ensure the gateway's configured frequency band matches that of your LoRaWAN end nodes and LNS.

4.2 Network Modes

  • Ethernet: Provides a stable wired internet connection.
  • WiFi: Can operate as a client to connect to an existing WiFi network or as an Access Point (AP) to provide a local WiFi network for configuration.
  • 3G/4G (Optional): For cellular versions, it provides internet connectivity using a mobile data network, suitable for remote deployments.

5. Maintenance

  • Environmental Conditions: Keep the gateway in a dry, indoor environment, away from direct sunlight, extreme temperatures, and high humidity.
  • Cleaning: Use a soft, dry cloth to clean the exterior of the device. Do not use liquid cleaners or aerosols.
  • Firmware Updates: Periodically check the manufacturer's website for firmware updates to ensure optimal performance and security. Follow the provided instructions for updating.
  • Antenna Care: Ensure antennas are securely attached and not bent or damaged, as this can affect LoRa signal strength.

6. Troubleshooting

  • No Power: Check the power adapter connection and the power outlet. Ensure the power LED is illuminated.
  • No Internet Connection:
    • Ethernet: Verify the RJ45 cable is properly connected to both the gateway and the router. Check router status.
    • WiFi: Ensure the gateway is connected to the correct WiFi network and the password is correct. If in AP mode, ensure your device is connected to the gateway's WiFi.
    • Cellular: Check SIM card insertion, cellular signal strength, and data plan activation.
  • Cannot Access Web Interface / Forgot WiFi Password: If you cannot access the web interface or have forgotten the WiFi password, a factory reset may be necessary. Refer to the device's specific documentation or manufacturer's support for the factory reset procedure. This typically involves pressing and holding the 'Toggle' button for a certain duration during power-up.
  • LoRa Communication Issues:
    • Verify that the LoRaWAN frequency band configured on the gateway matches your end nodes and LoRaWAN Network Server.
    • Check antenna connections.
    • Ensure end nodes are within range and transmitting correctly.

7. Specifications

Detailed product image with specifications and features text.
Figure 9: LPS8N Features and Specifications Overview.
CategorySpecification
Model NumberLPS8N
LoRa Interfaces1 x SX1302/03 LoRa Transceiver
Max Output Power27dBm
Sensitivity-140dBm
General Interfaces1 x 10M/100M RJ45 ports
1 x 2.4G WiFi (802.11 bgn)
1 x USB host port
1 x USB Type-C port for power
Power Input5V, 2A
Optional Feature4G Cellular Version
Frequency Bands (868)EU868, IN865
Frequency Bands (915)US915, AU915, AS923, KR920
4G Cellular OptionsE: EMEA, Korea, Thailand, India
A: North America, Mexico, Brazil, Australia, New Zealand, Taiwan
J: Japan (DOCOMO/SoftBank/KDDI)
Dimensions (L x W x H)15 cm x 15 cm x 10 cm (approximate package size)
Weight0.6 kg (approximate package weight)

8. User Tips

  • Frequency Band Selection: It is crucial to select the correct frequency band for your region. The 868MHz frequency band typically includes EU868 and IN865. The 915MHz frequency band typically includes AU915, KR920, US915, and AS923. Ensure your gateway's configuration matches your local regulations and LoRaWAN end devices.
  • Important notices regarding 868MHz and 915MHz frequency bands and their regional inclusions.
    Figure 10: Important Frequency Band Notices.
  • Power Plug Compatibility: Ensure you select the correct power plug type (EU, AU, US, UK) for your region to avoid compatibility issues.
  • OpenWrt System: The LPS8N runs on an open-source OpenWrt system, allowing for advanced customization and flexibility for experienced users.

9. Warranty and Support

For warranty information, technical support, or further assistance, please contact the manufacturer or your authorized reseller. Keep your purchase receipt for warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.