1. Introduction
This manual provides detailed instructions for the safe and effective operation and maintenance of your ANDELI MIG-270P PRO welding machine. This full-function double pulse MIG welder is designed for versatile welding applications, including MIG, Lift TIG, and MMA, with specialized capabilities for aluminum welding. Please read this manual thoroughly before initial use and keep it for future reference.

2. Key Features and Advantages
- Multi-functional Welding: Supports MIG, Pulse MIG, Double Pulse MIG, MMA, and Lift TIG welding processes.
- Intuitive LCD Screen: Features a clear LCD screen for humanized operation and easy parameter adjustment.
- Aluminum Welding Capability: Optimized for welding aluminum, including aluminum-silicon and aluminum-magnesium alloys.
- Compact Design: One-piece compact appearance, compatible with 5KG welding wire.
- Precision Wire Feeding: Equipped with a perfect wire feeding function suitable for 0.8-1.0mm welding wire.
- Advanced Heat Dissipation: Full-bridge movement design ensures best heat dissipation and stable power output.
- Forced Air Cooling: Features a forced air cooling duct for light industry level heavy load operation.
- Safety Protections: Includes Overload Protection, Over Temperature Protection, Over Current Warning, and VRD (Voltage Reduction Device) Anti-shock Mode for enhanced welding safety.
- 360° Rotary Switch: Allows for quick and automatic parameter matching.



3. Setup
Before operating the welding machine, ensure all connections are secure and correct for the desired welding process. Always work in a well-ventilated area and wear appropriate personal protective equipment (PPE).
3.1 Component Identification
The MIG-270P PRO typically includes the following accessories:
- Ground Clamp (2M)
- MIG Torch (3M)
- Gas Pipe (3M)
- Nozzle (x10)
- Nozzle Shield (x2)

3.2 Installation Diagrams
Refer to the diagrams below for connecting your welding accessories based on the desired welding method:

- Al Welding: Connect the Al Welding Torch and Ground Clamp.
- Spool Gun: Connect the Spool Gun and Ground Clamp.
- MIG/MAG: Connect the MIG Torch and Ground Clamp.
- Lift TIG: Connect the Ground Clamp and LIFT TIG torch.
- Flux MIG: Connect the MIG Torch and Ground Clamp.
- MMA: Connect the MMA Holder and Ground Clamp.
4. Operating Instructions
The MIG-270P PRO features an intuitive LCD screen and 360° rotary switches for easy mode selection and parameter adjustment. Follow these steps for operation:
4.1 Power On and Mode Selection
- Ensure the machine is properly connected to the power supply and all welding accessories are installed.
- Turn on the welding machine. The LCD screen will display the startup sequence.
- Use the 'MODE SELECT' button on the control panel to cycle through the available welding modes: DC MIG, Pulse MIG, Double Pulse MIG, MMA, and Lift TIG.
- Rotate the left (L-KNOB) and right (R-KNOB) rotary switches to navigate and select specific options or parameters within the chosen mode.
4.2 Parameter Adjustment
The 360° rotary switches allow for precise parameter adjustment and automatic matching for various materials and welding types.

- DC MIG (5 Modes): Select from Steel 100% CO2, Steel 25% CO2, Manual Regulation (Constant Voltage), Synergy (Flux-cored), or Manual Regulation (Spool Gun).
- Pulse MIG (6 Modes): Options include Steel 80% Ar + 20% CO2, Stainless Steel 80% Ar + 20% CO2, Stainless Steel 97.5% Ar + 2.5% CO2, Cu-Si 100% Ar, Al-Si 100% Ar, and Al-Mg 100% Ar.
- Double Pulse MIG (6 Modes): Offers the same material options as Pulse MIG for enhanced control.
- MMA: Adjust parameters such as Voltage, Current, Hot-start, Force, and activate VRD (Anti-shock Mode) for safety.
- Lift TIG: Adjust Voltage and Current settings as needed.
4.3 Spool Gun Operation
The MIG-270P PRO supports the use of a MIG spool gun, which can be configured for specific applications, particularly for aluminum welding. If you require assistance with spool gun setup or compatibility, please contact customer service.

5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your welding machine. Always disconnect the machine from the power supply before performing any maintenance.
- Cleaning: Keep the machine clean and free from dust, metal particles, and debris. Use compressed air to clear ventilation openings regularly.
- Cable Inspection: Regularly check all welding cables, torches, and ground clamps for wear, cuts, or damage. Replace damaged components immediately.
- Ventilation: Ensure the machine's ventilation openings are unobstructed during operation to prevent overheating.
- Storage: Store the welding machine in a dry, clean environment when not in use.
6. Troubleshooting
If you encounter issues with your MIG-270P PRO, please follow these basic troubleshooting steps:
- No Power: Check the power cord connection, wall outlet, and circuit breaker. Ensure the machine's power switch is in the 'ON' position.
- No Arc: Verify that the ground clamp is securely attached to the workpiece. Check the welding torch connections and ensure the correct welding mode and parameters are selected.
- Poor Weld Quality: Adjust welding parameters (voltage, current, wire feed speed) according to the material and thickness. Ensure proper gas flow (if applicable) and check for contaminated consumables.
- Overheating Warning: If an overheating indicator appears, stop welding and allow the machine to cool down. Ensure adequate ventilation around the machine.
- Spool Gun Issues: If the spool gun is not working, check its connection to the machine and ensure the wire is feeding correctly. Refer to the spool gun's specific instructions if available.
For persistent issues or error codes displayed on the LCD screen, consult the full user manual (if available) or contact customer support.
7. Specifications
The following table outlines the technical specifications for the ANDELI MIG-270P PRO:

| Function | MIG | LIFT TIG | MMA |
|---|---|---|---|
| Power Supply Voltage(V) | AC 220V ± 15% | ||
| Input Current(A) | 39 | 29 | 40 |
| Welding Current Range(A) | 30-200 | 15-200 | 15-200 |
| Rated Output Voltage(V) | 16.5/24 | 10.4/18 | 20.4 / 27.2 |
| Power Factor | 0.75 | 0.73 | 0.77 |
| Duty Cycle (% 40 C 10min) | 30% 200A 100% 110A | 30% 200A 100% 110A | 30% 200A 100% 110A |
| No-Load Voltage(V) | 64 | ||
| Load Duration(%) | 30 | ||
| Efficiency(%) | 77 | ||
| Wire Diameter(MM) | 0.8 / 1.0 | ||
| Insulation Class | H | ||
| Protection Class | IP21S | ||
| Dimension(MM) | 495x210x330 | ||
| Net Weight(KG) | 12.1 | ||
8. User Tips
- Spool Gun Compatibility: Based on user inquiries, ensure your spool gun is compatible with the MIG-270P PRO. It is recommended to verify compatibility with the seller or manufacturer if you plan to use a non-standard spool gun.
- AC/DC Selection: The machine's capabilities are primarily DC for MIG, Lift TIG, and MMA. If AC/DC selection is a critical requirement for your specific welding needs, please confirm the exact features of your model with the seller.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase records, including the date of purchase and model number, for reference when seeking support.