1. Introduction
The PowMr Pstar series solar charge controller is a versatile and lightweight device designed for efficient energy management in solar systems. It supports a wide range of system voltages (12V, 24V, 36V, 48V) and various battery types, including lithium-ion and lead-acid. Featuring a three-stage PWM charging algorithm, it optimizes battery performance and extends battery life. The integrated LCD display and keypad provide easy parameter configuration and real-time system monitoring. With robust built-in protection features and an accurate fault code reporting system, it ensures stable and safe operation for your solar power needs.
Product Overview
2. Key Features
- Compatible with lithium-ion and lead-acid batteries, with support for user-defined battery types.
- Automatic identification of 12V/24V/36V/48V system voltage.
- Multiple protection functions to ensure safe operation and extend battery life.
- Natural air cooling for silent heat dissipation.
- LCD screen for real-time monitoring and parameter configuration.
- Compact size, lightweight, and easy installation.
- Built-in dual USB ports (5V/2A*2) for charging mobile devices.
- User-friendly setup via the front panel LCD.
Note: Do not charge Li-iron batteries if the battery temperature is below 0°C.
3. Specifications
The following table details the technical specifications for the PowMr Pstar series solar charge controllers (30A, 60A, 80A models).

| Feature | Pstar-30A | Pstar-60A | Pstar-80A |
|---|---|---|---|
| PV Input | |||
| Max Open Voltage of PV Module | 100V | ||
| PV Operation Voltage Range | >System voltage and ≤100V | ||
| Max. Input Power: | |||
| For 12V system | ≤360W | ≤720W | ≤960W |
| For 24V system | ≤720W | ≤1440W | ≤1920W |
| For 36V system | ≤1080W | ≤2160W | ≤2880W |
| For 48V system | ≤1440W | ≤2880W | ≤3840W |
| Charge Mode | |||
| Charging technology | PWM | ||
| Charge Algorithm | 3-Stages | ||
| Self-consumption | ≤20mA | ||
| Nominal System Voltage | 12V/24V/36V/48V | ||
| Rated Charging Current | 30A | 60A | 80A |
| DC Output | |||
| Rated Output Current | 20A | 35A | 50A |
| USB Interface | 5V/2A*2 | ||
| Environment | |||
| Operating Temperature Range | -20℃~+55℃ | ||
| Humidity Range | ≤90%, Non-condensing | ||
| General Specification | |||
| Protection Class | IP30 | ||
| Dimension | 187*94*49mm | 187*132*60mm | 187*132*60mm |
| Net weight | 0.49kg | 0.7kg | 0.725kg |
4. Setup and Installation
4.1 Component Identification

| No. | Component | No. | Component |
|---|---|---|---|
| 1 | LCD display | 5 | Load port |
| 2 | Function keys | 6 | USB port |
| 3 | PV input port | 7 | Mounting hole (4 x Ø5mm) |
| 4 | Battery port | 8 | Heat sink |
4.2 Wiring Diagram
Follow the steps below to correctly connect your solar charge controller to the battery, solar panels, and load.

- Connect the Battery (lead-acid and Lithium batteries) to the battery port.
- Connect the PV (Solar Panels) to the PV input port. Ensure the Max Open Voltage of PV is 100V.
- Connect the Load or connect an inverter to the load port, and then connect the inverter to the AC Output.
5. Operating Instructions
5.1 3-Stage PWM Charging Technology

The controller utilizes an advanced 3-stage PWM charging algorithm for fast, efficient, and safe battery charging, effectively extending battery life. The stages are:
- Bulk Charge: The battery is charged at maximum charge current until the voltage increases to the configured boost charging voltage.
- Boost Charge: The battery is charged at the configured boost charging voltage until it reaches a full charge state, with the charge current slowly decreasing.
- Float Charge: The controller reduces the battery voltage by reducing the charging current, maintaining the battery continuously at the floating charging voltage set value to keep it fully charged.
- Return to Bulk Charge: If the load uses excessive power, the system will return to the Bulk charge stage.
5.2 LCD Screen Display and Navigation

The built-in backlit LCD screen allows for real-time monitoring and control of charging parameters. It displays charging current, generated energy, temperature, battery voltage, and error codes. The display will automatically return to the default screen after 100 seconds of inactivity.
- Checking PV Input Information: Press the "PV ▲" key to cycle through PV input voltage, PV input current, and PV input power.
- Checking Battery Information: Press the "BAT ▼" key to cycle through current battery voltage, equipment temperature, battery calibration voltage, battery type, low DC cut-off, recovery voltage, float charging voltage, and boost charging voltage.
- Configuring Load Enable Duration: Press and hold the "SET" key to enter the load mode setting.
- 00H: Solar light control mode (DC output enabled when solar energy is sufficient).
- 24H: Load is turned on immediately (Default).
- 01H-23H: Adjust the load enable duration for a specific number of hours.
5.3 Battery Type Compatibility

The controller is compatible with various 12V, 24V, 36V, or 48V batteries, including SEL, USE, FLD, GEL, LiFePO4, and ternary lithium batteries. Clear and special icons for various lithium batteries are displayed on the LCD screen for easy selection. It also supports user-defined battery settings.
5.4 Battery Voltage Calibration

To calibrate the battery voltage:
- Navigate the LCD display until the parameter switches to the "battery calibration voltage" item. Press and hold the "BAT ▼" key to enter the battery voltage calibration setting.
- Use the "PV ▲" or "BAT ▼" keys to adjust the battery voltage parameters on the controller to match the battery voltage measured by an external multimeter.
- Finally, press "Set" to confirm the calibration.
6. Maintenance
6.1 Heat Dissipation

The PowMr Pstar series controller features natural air cooling for heat dissipation, ensuring totally silent operation. To maintain optimal performance, ensure that the heat sink fins are not obstructed and allow for adequate airflow around the unit.
6.2 General Care
- Regularly inspect the controller for any visible damage or loose connections.
- Keep the controller clean and free from dust and debris. Use a dry, soft cloth for cleaning.
- Ensure the operating environment is within the specified temperature and humidity ranges.
7. Troubleshooting and Protections
7.1 Multiple Protections

The controller is equipped with comprehensive safety features to protect your PV system:
- Reverse Polarity Connection Protection: Prevents damage from incorrect battery or solar panel polarity.
- Over Discharging Protection: Protects the battery from excessive discharge, prolonging its lifespan.
- Overheating Protection: Automatically stops charging if the controller's temperature exceeds safe limits.
- Output Short Circuit Protection: Safeguards against short circuits in the load output.
- Maximum Charging Current Limit Protection: Ensures the charging current does not exceed the controller's rated capacity.
7.2 Fault Code Reporting
The LCD display provides accurate fault code reporting to help diagnose and resolve issues quickly. Refer to the full user manual (if available) for a complete list of fault codes and their corresponding troubleshooting steps. In case of persistent issues, contact customer support.
8. Warranty and Support
8.1 Free Returns and Delivery Guarantee
- Free Returns: Enjoy free returns within 15 days of delivery.
- Fast Delivery: If delivery is delayed, you may be eligible for a $1.00 coupon code.
- Refunds for Issues: Refunds are provided if the package is lost, items are damaged, or if there is no delivery within 30 days.
8.2 Security & Privacy
- Safe Payments: Your personal details are not shared with any third parties without your consent.
- Secure Personal Details: Your privacy is protected, and personal details are kept safe and secure.
8.3 Customer Support
For any questions, technical assistance, or warranty claims, please contact the PowMr Official Store customer support. Provide your product model and purchase details for efficient service.
9. Statement of Compliance
9.1 Disclaimer
⚠️Warning: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information go to www.P65Warnings.ca.gov/.