1. Introduction
This manual provides essential information for the safe and efficient operation of your ISDT Air 8 or Q8 Max Smart Charger. These chargers are designed for high-performance battery management, supporting various battery types including LiFe, LiIon, LiPo, LiHV, Pb, and NiMH, with advanced features like BattAir technology and app connectivity.

2. Safety Precautions
- Always operate the charger in a well-ventilated area, away from flammable materials.
- Ensure correct battery type and cell count settings before charging. Incorrect settings can lead to battery damage or fire.
- Do not leave the charger unattended during operation.
- Keep the charger away from moisture, dust, and direct sunlight.
- Use only approved power supplies and cables.
- Children should be supervised when near the charger.
3. Product Overview
3.1 ISDT Air 8

The Air 8 is a compact smart charger featuring a clear display and intuitive controls. It supports BattAir technology for enhanced battery management.
3.2 ISDT Q8 Max

The Q8 Max is a high-power smart charger offering robust performance for demanding charging and discharging tasks. Its display provides detailed battery information, including internal resistance.
4. Setup and Connections
4.1 Power Connection
Connect the charger to a DC power source (10-34V for Q8 Max, 10-34V for Air 8) using the DC IN port. Ensure the power supply can provide sufficient current for your charging needs.
4.2 Battery Connection
- Connect the main discharge lead of your battery to the main battery port on the charger.
- Connect the balance lead of your battery to the balance port on the charger. Ensure the balance lead is correctly oriented.

4.3 BattAir Technology (Air 8)
The Air 8 supports BattAir technology. This allows for wireless communication with compatible BattAir-enabled batteries for automatic battery identification and optimized charging parameters. Ensure your BattAir Plugin is correctly connected to the battery.

4.4 App Connectivity (Air 8)
The Air 8 can connect to a mobile application via Bluetooth for wireless operation and monitoring. Download the official ISDT app and follow the in-app instructions to pair your device.

5. Operating Instructions
5.1 Basic Operation
- Power on the charger.
- Navigate the menu using the control buttons (up/down arrows, circle button for selection).
- Select the desired battery type (LiPo, LiFe, LiIon, LiHV, Pb, NiMH).
- Set the cell count (e.g., 1-8S for LiPo).
- Set the charge or discharge current.
- Confirm settings and start the process.
5.2 Charging
Once the battery type, cell count, and current are set, initiate the charging process. The display will show real-time information such as voltage, current, charged capacity (mAh), and individual cell voltages (for balanced charging).

5.3 Discharging
Select the discharge function, set the discharge current, and confirm. The charger will safely discharge the battery to the set voltage. Note the maximum discharge capacity for each model.
5.4 Balance Charging
Both chargers perform balance charging to ensure all cells in a multi-cell battery pack are charged to the same voltage, prolonging battery life and improving safety. Ensure the balance lead is connected.

6. Maintenance
6.1 Cleaning
Regularly clean the charger's exterior with a soft, dry cloth. Do not use solvents or abrasive cleaners. Ensure ventilation openings are free from dust and debris.
6.2 Firmware Upgrade
Periodically check for firmware updates to ensure optimal performance and access to new features. Firmware can often be updated via the mobile app or by connecting the charger to a computer.
7. Troubleshooting
- Charger not powering on: Check DC input voltage and connections. Ensure the power supply is adequate.
- Battery not detected: Verify battery main and balance lead connections. Ensure the battery is not severely over-discharged.
- Charging error: Double-check battery type, cell count, and current settings. Inspect battery for damage.
- Overheating: Ensure adequate ventilation around the charger. Reduce charge/discharge current if necessary.
8. Specifications
8.1 ISDT Q8 Max Specifications
| Feature | Specification |
|---|---|
| Input Voltage | DC 10-34V |
| Max Input Current | 33A |
| Output Voltage | DC 1-34V |
| Charge Current | 0.2A-30A |
| Discharge Current | 0.2A-3A |
| Max Charge Capacity | 1000W |
| Max Discharge Capacity | 30W |
| Balance Current | 1.5A/Cell Max |
| Balance Cells | 2-8S |
| Color | Black |
| Support Battery Types | LiFe, Lion, LiPo: 1-8S; LiHV: 1-7S; Pb: 1-12S; NiMH: 1-16S |
| Display | 2.8" 240x320 IPS LCD |
| Size | 95x95x45mm |
| Weight | 288g |
8.2 ISDT Air 8 Specifications
| Feature | Specification |
|---|---|
| Max Charge Capacity | DC 500W |
| Charge Current | 0.1A-20.0A |
| Max Discharge Capacity | 15W |
| Discharge Current | 0.1A-1.5A |
| Input Voltage | DC 10-34V |
| Output Voltage | DC 1-35V |
| Support Battery Types | LiFe, Lion, LiPo: 1-8S; LiHV: 1-7S; Pb: 1-12S; NiMH: 1-16S |
9. Warranty and Support
For warranty claims or technical support, please contact the retailer or manufacturer directly. Keep your proof of purchase for warranty validation.