Introduction
Thank you for purchasing the Wishcolor Heareal-Z2 Lossless Audio Switcher. This manual provides essential information for the safe and efficient use of your device. Please read it thoroughly before operation and retain it for future reference.
Safety Warnings
Electrical Safety
- Use only the power adapter provided with the product or a compliant power supply.
- Do not use in humid environments (unless the product specifically states a waterproof rating).
- If the power cord is damaged, do not continue to use it and contact support immediately for a replacement.
- Always disconnect the power before cleaning.
Usage Environment
- Operating temperature range: -10°C to 40°C (subject to model specifications).
- Avoid direct sunlight, high temperatures, and dusty environments.
- Keep the ventilation good and do not block the heat dissipation holes.
Operational Safety
- Do not disassemble or modify the product yourself, as there are no user-repairable parts inside.
- Prevent liquid from entering the product interior.
- If the product emits smoke, unusual odors, or abnormal noise, immediately disconnect the power and contact after-sales service.
Setup
Unpacking Inspection
After opening the package, please check that all items are complete. If you find any items missing or damaged, please contact us immediately.
First Use
- Please ensure the product is fully charged before use (if applicable).
- Check if the power supply voltage is consistent with the product specifications (AC100-240V, 50/60Hz, applicable worldwide).
Connecting the Audio Switcher
The Heareal-Z2 features 4 input and 4 output RCA channels, along with a DC12V power input. Connect your audio sources (e.g., PC, CD player, music player, vinyl record player) to the 'IN' ports and your audio output devices (e.g., power amp, active speakers, mixer, headphones, headphone amp) to the 'OUT' ports. Ensure all connections are secure.


Operating Instructions
Basic Operations
- Power On/Off: Use the 'ON/OFF' toggle switch located on the front panel.
- Input Selection: Rotate the 'INPUT SWITCH' knob on the front panel to select one of the 4 available input channels.
- Output Selection: Rotate the 'OUTPUT SWITCH' knob on the front panel to select one of the 4 available output channels.
- LED Indicators: LED lights on the front panel indicate the currently active input and output channels.
Key Features
- Mute Switching: The device utilizes original Panasonic relays for mute switching, ensuring a smooth transition between channels without any popping sound.
- Lossless Audio: The design ensures direct connection between input and output, providing lossless audio signal transmission.
Maintenance and Care
- Cleaning: Wipe the outer casing with a soft, dry cloth. Do not use chemical solvents.
- Storage: When not in use for an extended period, clean and store the device in a cool, dry place.
- Battery (if applicable): If the product contains a battery and is not used for an extended period, please remove the battery to prevent leakage.
Troubleshooting
If you encounter any issues, please refer to the following common problems and solutions:
1. Noise, Hum, or Current Sound
Most often caused by input signal or signal line interference.
- Common Ground Interference:
- Connect only one input and one output channel to the switcher.
- Use a dual RCA to 3.5mm adapter (often included) to connect to headphones and listen for noise.
- Test each input/output path one by one.
- If noise persists on a specific path, consider adding a ground loop isolator to that equipment or using a linear power supply.
- Output Line Interference:
- Disconnect all output lines from the switcher.
- Connect the provided dual RCA to 3.5mm adapter to headphones and listen for noise.
- If no noise is present, replace the output audio cable with a shielded one.
- Input Line Interference:
- Replace the input audio cable with a shielded one.
- If the noise disappears, the original input cable was the source of the problem.
2. Unbalanced Left/Right Channel or Single Channel Output
- Troubleshooting Steps:
- Swap the input/output connections between the left and right channels.
- If the channel imbalance or single channel issue follows the swap, it indicates a problem with the input signal or the audio cable. Adjust the input signal or replace the audio cable.
3. Indicator Light Not On After Power On
- Troubleshooting Steps:
- Check if the power adapter is securely plugged into both the device and the power outlet.
- Ensure the 'ON/OFF' toggle switch on the front panel is in the 'ON' position.
General Troubleshooting
- Unable to power on: Check the power connection and ensure the power adapter is functioning correctly.
- No display/Display error: Check for poor connections or incorrect settings. Try restarting the device and re-checking all connections.
- Inaccurate measurement values (instrument-related): Confirm the measurement range and contact calibration services if necessary.
- Other faults: For any other issues, please contact customer service for technical support.
Specifications
| Parameter | Value |
|---|---|
| Model Number | Heareal-Z2 |
| Brand Name | Wishcolor (TZT) |
| Signal Format | Stereo 2.0 signal L/R |
| Input Voltage | DC12V (100-240V) |
| Port Type | RCA sockets (8 sockets: 4 inputs + 4 outputs) |
| Shell Material | All-aluminum CNC shell |
| Dimensions (WxDxH) | 150 x 135 x 60mm / 5.9 x 5.3 x 2.4" |
| Net Weight | 500g / 1.1 lb |
| Compatible Audio & Video Equipment Style | Amplifier, Professional Audio Equipment |
| Origin | Mainland China |
| Certification | NONE |
| Operating Temperature | -10°C ~ 40°C |
| Storage Temperature | -20°C ~ 60°C |
| Protection Level | IP20 (for indoor use, except for waterproof models) |
| Authentication Information | CE, RoHS (Compliant with EU directives) |
User Tips
No specific user tips were available from provided reviews or Q&A content.
Warranty and Support
Warranty Policy
The product comes with a 12/24 month warranty from the date of purchase (subject to store announcement).
Technical Support
For detailed technical documentation, calibration certificates, or hard copies of the manual, please contact the seller via AliExpress internal message or email at wishcolor@126.com. The typical response time is within 24 hours during working days.
A user manual in PDF format is also available. Please refer to the product page for the link to download the 'User manual (PDF)'.
Disclaimer
This instruction manual is a general version; the actual product functions and parameters shall prevail. The manufacturer reserves the right to change product designs and specifications without prior notice.