1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your KCQ Scooter Controller with LED Display and APP. This controller is specifically designed for 8.5-inch electric scooters and features Bluetooth connectivity for app-based control and monitoring. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Safety Information
⚠️ Please mind potential fire risk and strictly follow the instruction manual for charging and storage.
Always ensure all connections are secure and correctly wired before powering on the scooter. Incorrect wiring can lead to damage to the controller, motor, or battery, and poses a safety risk. Do not operate the scooter if any components are damaged or malfunctioning. Keep the controller dry and away from water to prevent electrical damage.
3. Product Overview and Components
The KCQ Scooter Controller kit includes the main controller unit, an LED display with integrated wiring, and various accessories for your electric scooter. This system allows for advanced control and monitoring via a dedicated mobile application.

Figure 3.1: Overview of the KCQ Scooter Controller kit components, including headlight, taillight, accelerator, controller, display part, and screen. A QR code for the KCQ Scooter APP is also visible.

Figure 3.2: The LED display unit and controller, showing the main components and wiring.

Figure 3.3: Close-up of the LED display unit, indicating connections for the accelerator, headlight, and brake.
4. Specifications
| Feature | Specification |
|---|---|
| Voltage | DC 36V |
| Rated Power | 350W |
| Undervoltage Protection | 30V |
| Current Limit | 15A |
| Max Speed | 30 km/h |
| Type | LED Display with APP |
| Origin | Mainland China |
| Authentication | CE |
| Controller Dimensions (approx.) | 9 cm (Length) x 4.8 cm (Width) x 3.6 cm (Height) |

Figure 4.1: Approximate dimensions of the controller unit.

Figure 4.2: Certificate of Conformity for the electric scooter controller (Models: XFY-PRO, KCQ-PRO).
5. Setup and Installation
Important: This controller is designed for 8.5-inch scooters only. Ensure your scooter is compatible before proceeding.
5.1 Wiring the Controller
Carefully follow the wiring diagram below to connect the controller to your scooter's motor, battery, and display unit. Pay close attention to the color coding and connector types.

Figure 5.1: Detailed motor wiring diagram showing phase lines (Y, G, B) and Hall lines. Ensure red and black Hall wires are placed outside.
Motor Wiring Steps:
- Connect with Motor: Connect the main motor wires (usually thicker wires) to the corresponding terminals on the controller.
- Connect with Hall Wire of the Motor: Connect the Hall sensor wires. The red and black wires should be placed outside.
- Connect Battery: Connect the battery wires to the controller.
- Connect with Display Screen: Connect the display unit cable to the controller.
- Connect Taillight: Connect the taillight wire.
- Connect Headlight: Connect the headlight wire.
- Connect Accelerator: Connect the accelerator wire.
- Ensure all connections are firm and insulated.
Motor Adjustment (if noise or reversal occurs):
If the motor runs with noise, vibrates but doesn't run smoothly, or runs in reverse, you may need to adjust the Hall wire or phase wire connections.
- Hall Line Adjustment: Test the 6 possible Hall wire connection methods one by one until the motor runs smoothly.
- Phase Line Adjustment: If the motor runs smoothly but in reverse, change the phase wire connection until it runs well.

Figure 5.2: Example of internal scooter wiring with the controller and battery installed.
5.2 APP Installation and Bluetooth Connection
The controller supports a mobile application for enhanced control. To install the app:
- Scan the QR code provided on the product packaging or in Figure 3.1 to download the KCQ Scooter APP for Android/iOS.
- Install the application on your smartphone.
- Turn on your scooter and enable Bluetooth on your smartphone.
- Open the KCQ Scooter APP and follow the on-screen instructions to connect to your scooter controller via Bluetooth. The app will adapt to your mobile phone's system language.

Figure 5.3: Diagram illustrating Bluetooth connection between a smartphone and the scooter for app control.
6. Operating Instructions
Once the controller is installed and connected to the app, you can control various functions of your scooter.
6.1 LED Display Functions
The integrated LED display shows essential information such as speed, battery level, and riding mode.
6.2 Mobile Application Functions
The KCQ Scooter APP provides comprehensive control and monitoring features:

Figure 6.1: Screenshot of the mobile application interface showing speed control, riding time, mileage, total mileage, map, lock/unlock, and on/off functions.
- Speed Control: Adjust speed gears (1st, 2nd, 3rd).
- Riding Data: View riding time, current mileage, and total mileage.
- Map: Access map features (if available in the app).
- Lock/Unlock: Electronically lock or unlock your scooter.
- On/Off: Power the scooter on or off.
- Front Light: Control the scooter's front light.
6.3 Settings via APP
Access the settings menu in the app to customize your riding experience:

Figure 6.2: Screenshot of the mobile application settings menu, highlighting 'Zero start' and 'Non-zero start' options.
- Start Mode: Choose between 'Zero start' (no initial speed needed to start) or 'Non-zero start' (requires a kick-off to engage motor).
- Unit Setting: Switch between mph and km/h for speed display.
- Tail Light: Toggle the tail light on or off.
- Fixed Speed Cruise: Enable or disable cruise control.
- Connection Password: Set a password for Bluetooth connection.
- Other options include Personal Center, Serial Number, Modify Bluetooth name, User manual, Troubleshooting, About us, Reset, User Agreement, and Privacy Agreement.
7. Maintenance
To ensure the longevity and optimal performance of your scooter controller and accessories, follow these maintenance guidelines:
- Regular Inspection: Periodically check all wiring connections for looseness or damage. Ensure no wires are frayed or exposed.
- Cleanliness: Keep the controller and display unit clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using harsh chemicals or excessive moisture.
- Moisture Protection: Protect the controller from water exposure. While some components may have basic water resistance, prolonged exposure to moisture can cause damage.
- Battery Care: Follow the manufacturer's instructions for battery charging and storage to prevent undervoltage or overvoltage issues.
- Component Check: Regularly check the brake lever, accelerator, headlight, and taillight for proper function. Replace any damaged parts promptly.
8. Troubleshooting
The LED display may show error codes to indicate specific issues. Refer to the table below for common error codes and their solutions.
| Error Code | Description | Solution |
|---|---|---|
| E0 | Temperature protection | Motor has reached set temperature. Allow motor to cool down below the set value for normal riding. |
| E1 | Motor Hall failure | Motor Hall sensor is damaged. Replace the motor. |
| E2 | MOS tube failure | 1. Motor phase wires are short-circuited. 2. Internal components of the controller are damaged. Solution: 1. Check motor phase wires for damage; replace motor if necessary. 2. Replace the controller. |
| E3 | Brake failure | 1. Brake lever is damaged. 2. Brake lever not returned before starting. Solution: 1. Replace the brake lever. 2. Release brake lever to return to position; if error persists, replace brake lever. |
| E4 | Accelerator failure | 1. Speed control handle is damaged. 2. Speed control handle not returned before starting. Solution: 1. Replace the speed control handle. 2. Loosen speed control handle to return to original position; if error persists, replace handle. |
| E5 | Undervoltage protection | Supply voltage is lower than the controller's minimum. Solution: Charge or replace the battery. |
| E6 | Controller/instrument communication failure | Instrument and controller cannot communicate. Solution: 1. Check communication line connection. 2. Check motor phase line or Hall line for damage/leakage. 3. Replace the motor. |
| E7 | Overvoltage protection | Power supply voltage is higher than the controller's maximum. Solution: Replace the battery or motor phase wire that matches the controller's voltage. Short circuit with Hall wire leads to leakage. |
| E8 | Controller operational amplifier failure | Controller damaged due to water ingress or internal component damage. Solution: Replace the controller. |
| E9 | Stalled rotor fault | 1. Obstacle preventing motor rotation. 2. Incorrect wiring sequence between motor and controller. Solution: 1. Remove obstacle. 2. Re-match motor and controller wiring with manufacturer guidance. |
9. User Tips
- Compatibility Check: Always confirm that this controller is compatible with your scooter model, especially the wheel size (this model is for 8.5-inch scooters).
- Wiring Precision: Take extra care when connecting the motor's Hall wires and phase wires. Incorrect connections are a common cause of motor issues (noise, vibration, or reverse operation).
- App Features: Explore all features of the KCQ Scooter APP, including 'Zero start' and 'Non-zero start' options, to customize your riding experience.
- Firmware Updates: Check the app or manufacturer's website periodically for any available firmware updates for the controller to ensure optimal performance and new features.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.