CXG 8000W Power Spot Welder

Contents

8000W Power Spot Welder Instruction Manual

Model: 8000W Power Spot Welder | Brand: CXG

1. Introduction

This manual provides detailed instructions for the safe and effective use of your 8000W High Power Intelligent Double Pulse Spot Welder. Designed for precision spot welding, this portable device is ideal for 18650 battery packs, mobile phone batteries, and other small-scale welding applications involving nickel strips. Please read this manual thoroughly before operation to ensure optimal performance and safety.

8000W Power Spot Welder main unit with foot pedal and welding pens

Figure 1: 8000W High Power Intelligent Double Pulse Spot Welder

2. Safety Instructions

  • Always wear appropriate personal protective equipment (PPE), including safety glasses, gloves, and protective clothing, when operating the spot welder.
  • Ensure the work area is well-ventilated and free from flammable materials.
  • Do not operate the welder in wet conditions or expose it to rain.
  • Keep children and unauthorized personnel away from the operating area.
  • Never touch the welding pens or workpiece during operation, as high temperatures and electrical currents are present.
  • Only weld materials specified in this manual (nickel strips). Do not attempt to weld copper, aluminum, gold, or silver, as this can damage the machine and pose a safety risk.
  • Disconnect the power supply before performing any maintenance or cleaning.
  • If the welding pen temperature becomes too high, allow it to cool down before continuing operation.
  • Use only the provided charger for recharging the internal battery.

3. Product Overview

3.1 Components

Diagram of the spot welder's function panel, showing foot pedal, spot welding pen, knob adjustment, indicator light, charging interface, and digital display.

Figure 2: Function Panel Introduction

  • **Main Unit:** Houses the control circuitry, battery, and display. Made from ABS shell material.
  • **Foot Pedal:** Used to trigger the welding pulse.
  • **Spot Welding Pens:** Two pens with copper tips for making contact with the nickel strip and battery. Approximately 47cm long for flexible operation.
  • **Knob Adjustment:** Controls the output current size (gear).
  • **Indicator Light:** Provides status feedback.
  • **Charging Interface:** For connecting the charger.
  • **High-definition Digital Tube Display:** Shows battery voltage and other operational information.
  • **Charger:** For recharging the internal lithium battery.
  • **Frosted Sheet:** (Purpose not explicitly stated, likely for surface preparation or protection).
  • **Trial Nickel Strip:** For practice welding.

3.2 Key Features

  • **High Power Output:** 8000W double pulse spot welding for strong and reliable welds.
  • **Built-in Rechargeable Battery:** Features a 9600mA lithium battery for portable use and extended operation.
  • **Foot Switch Control:** Allows for precise and hands-free welding initiation.
  • **Compact and Portable Design:** Easy to carry and use in various locations.
  • **Adjustable Output Current:** A knob allows fine adjustment of welding power.
  • **Detachable and Replaceable Welding Needles:** Reduces maintenance costs and extends product lifespan.
  • **Digital Display:** Provides real-time monitoring of battery power.
  • **Weldable Thickness:** Supports nickel strips from 0.1mm to 0.3mm.
Infographic showing six advantages: 8000W Power, High Rate Lithium Battery, High-definition Digital Tube Display, Knob Adjusts Gear, Inlet Needle Detachable Replacement, High Power Double Pulse.

Figure 3: Key Advantages

4. Setup

  1. **Unpacking:** Carefully remove all components from the packaging. Verify that all items listed in the packing list are present.
  2. **Initial Charge:** Before first use, fully charge the spot welder's internal lithium battery using the provided charger. Connect the charger to the charging interface on the main unit and plug it into a standard 100-240V AC outlet. The digital display will indicate charging status.
    Image showing the spot welder connected to a wall outlet for fast charging.

    Figure 4: Fast Charging the Spot Welder

  3. **Connect Welding Pens:** Insert the two spot welding pens securely into their respective ports on the main unit. Ensure a firm connection for optimal conductivity.
  4. **Connect Foot Pedal:** Plug the foot pedal cable into its designated port on the main unit.
  5. **Prepare Workpiece:** Ensure the nickel strip and battery terminals are clean and free of oxidation for best welding results. Use the frosted sheet if necessary for surface preparation.

5. Operating Instructions

  1. **Power On:** Turn on the spot welder using the power switch. The digital display will illuminate, showing the current battery voltage.
  2. **Adjust Welding Power:** Rotate the knob to adjust the output current (gear) according to the thickness of the nickel strip and the type of battery. A higher value on the knob corresponds to a higher output current. Start with a lower setting and increase gradually if needed.
    Close-up of the spot welder's knob for fine adjustment of welding power.

    Figure 5: Knob Fine Adjustment

  3. **Position Welding Pens:** Place the tips of both welding pens firmly onto the nickel piece, ensuring good contact with both the nickel strip and the battery terminal. Apply slight pressure.
  4. **Initiate Weld:** Press and hold the foot switch. The red indicator light will blink three times quickly, after which the welder will output a current to complete the welding process. Release the foot switch once the weld is complete.
  5. **Inspect Weld:** Carefully remove the welding pens and inspect the weld joint. It should be solid and secure. If the weld is weak, adjust the power setting and try again on a new spot.
  6. **Monitor Battery:** The high-definition digital display monitors the remaining battery power. Recharge the unit when the voltage is low.
    Close-up of the digital display showing battery voltage.

    Figure 6: High-definition Digital Tube Display

5.1 Welding Demonstration Video

Video 1: Demonstration of spot welding nickel strips to batteries using the foot pedal.

Four images demonstrating the spot welding effect: simple operation, solidly welded, solder joint integrity, and lithium battery nickel sheet welding.

Figure 7: Spot Welding Effect Examples

6. Maintenance

  • **Cleaning:** Regularly clean the welding pen tips and the main unit with a dry, soft cloth. Ensure no debris or metal particles accumulate around the welding points.
  • **Welding Pen Replacement:** The welding pens feature detachable needles. If the tips become worn or damaged, they can be easily replaced. Unscrew the old tip and screw in a new one.
    Diagram showing the detachable welding pen tip for easy replacement.

    Figure 8: Detachable Welding Pen

  • **Battery Care:** To prolong battery life, avoid fully discharging the unit frequently. Recharge promptly when the low voltage indicator appears. Store the unit in a cool, dry place when not in use for extended periods.
  • **Storage:** Store the spot welder and its accessories in a dry, dust-free environment, away from direct sunlight and extreme temperatures.

7. Troubleshooting

ProblemPossible CauseSolution
No power/Unit does not turn onBattery is discharged; Power switch is off.Charge the battery fully; Ensure the power switch is in the 'ON' position.
Weak or inconsistent weldsInsufficient power setting; Poor contact with workpiece; Worn welding tips; Oxidized nickel strip/battery.Increase the power knob setting; Ensure firm contact with both pens; Replace welding tips if worn; Clean nickel strip and battery terminals.
Overheating of welding pensContinuous use at high power; Insufficient cooling time between welds.Allow the pens to cool down; Reduce welding frequency; Lower power setting if possible.
Red light blinks but no weld occursPoor contact; Welding pens not properly connected.Ensure firm and proper contact; Check that welding pens are securely plugged in.

8. Specifications

Product parameter diagram showing dimensions: wire length 1500mm, machine size 150x98x50mm, spot welding pen length 470mm.

Figure 9: Product Dimensions

ParameterValue
Product Name8000W High Power Intelligent Double Pulse Spot Welder
Input Voltage100-240V
Output VoltageApprox. 8.4V (maximum)
Battery TypeBuilt-in rechargeable Lithium battery
Contained Battery Capacity9600mA
Spot Welding Current1200A (maximum)
Maximum Output Power8000W
Thickness of Spot Welded Nickel Tape0.1mm, 0.15mm, 0.2mm, 0.25mm, 0.3mm (Cannot weld copper/aluminum/gold/silver)
Machine Size (L*W*H)150mm * 98mm * 50mm
Spot Welding Pen LengthApprox. 47cm
Total Product Weight900g (including packaging box accessories)
Machine + Pen + Foot Weight700g
Shell MaterialABS
CertificationCE

9. User Tips

  • For best results, ensure the nickel strip is clean and flat against the battery terminal before welding.
  • Practice on the included trial nickel strip and scrap batteries to find the optimal power setting for your specific materials before working on your main project.
  • When welding, apply consistent, moderate pressure to both welding pens to ensure good electrical contact and a strong weld.
  • If welding multiple spots, allow a brief pause between welds to prevent excessive heat buildup in the pens and workpiece.
  • Always check the battery voltage on the digital display before starting a welding session to ensure sufficient power.

10. Warranty and Support

The manufacturer provides a standard warranty for this product against defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or warranty inquiries, please contact your retailer or the manufacturer's customer service department. Contact information can typically be found on the product packaging or the seller's website.

© 2023 CXG. All rights reserved.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.