1. Setup
1.1 Unboxing and Package Contents
Carefully unpack the controller and verify that all accessories are included:
- 1 x COOLMOON ARGB Controller
- 1 x Wireless Remote Control
- 1 x SATA Power Cable
- 1 x Motherboard Sync Line (5V 3-Pin ARGB)
- 1 x PWM Temperature Control Signal Line
- 1 x Instruction Manual
1.2 Installation
The controller features a magnetic design for easy installation within your PC chassis.

Figure 1.1: Controller bottom showing magnetic design for easy chassis attachment.
1.3 Wiring Diagram
Connect all components according to the diagram below. Ensure correct polarity and interface type to prevent damage.

Figure 1.2: Controller Installation Diagram. Connect fans, ARGB light strips, SATA power, motherboard sync, and temperature signal cable.
WARNING: Please do not plug into the wrong power supply interface, otherwise it will burn out equipment!
Interface Overview:

Figure 1.3: Detailed view of controller interfaces including PWM, ARGB, power, and sync ports.
- SATA Power Cable: Connect to your power supply unit (PSU) for controller power.
- Motherboard Sync (5V 3-Pin ARGB): Connect to your motherboard's 5V ARGB header for software control and synchronization.
- PWM Temperature Control Signal Line: Connect to your motherboard's CPU FAN header to receive temperature signals for intelligent fan speed control.
- Fans (PWM1-8): Connect up to 8 PWM fans.
- ARGB Devices (ARGB1-10): Connect up to 10 5V ARGB devices (fans, light strips).
- Computer Restart Button: Optionally connect your PC's restart button to the controller to cycle through lighting modes.
2. Operating Instructions
2.1 Wireless Remote Control
The controller is equipped with a wireless remote control (RF frequency: 433.92MHz) that allows you to manage lighting effects and fan speeds from a distance, even if the controller is inside the PC case.

Figure 2.1: Remote control layout and button functions.
- Power Button (On/Off Light): Turns the ARGB lighting on or off.
- R/M Button (Mainboard / Remote Control Switching): Toggles between motherboard ARGB sync mode and the controller's remote control mode.
- Speed +/-: Adjusts the speed of dynamic lighting effects.
- Mode: Cycles through the 368 built-in light effect modes.
- Brightness +/-: Adjusts the brightness of the ARGB lighting.
- R, G, B Buttons: Cycles through predefined red, green, and blue static colors.
- Color Palette Buttons: Selects various monochrome static colors. Press and hold for 3 seconds to pause the light.
- Music Mode Buttons (1-6): Activates different music rhythm modes.
2.2 Motherboard ARGB Sync (5V Aura Sync)
The controller supports 5V 3-pin ARGB motherboards from brands like ASUS, MSI, Gigabyte, and ASRock. When connected to the motherboard's ARGB header and switched to motherboard mode via the remote, you can control the lighting synchronization through your motherboard's software (e.g., ASUS Aura Sync, MSI Mystic Light Sync).

Figure 2.2: Example of a motherboard ARGB software interface for lighting control.
2.3 Music Rhythm Mode
The controller features a built-in sound sensing source that reacts to ambient music. To use this feature, play music through external speakers or a mobile phone. The ARGB lights will then move and change in rhythm with the music. There are 6 distinct music rhythm modes available.

Figure 2.3: PC setup demonstrating ARGB lights synchronized with music.
Video 2.1: Demonstration of the controller's music rhythm modes with various lighting effects.
2.4 PWM Intelligent Temperature Control
When the PWM temperature control signal line is connected to your motherboard's CPU FAN header, the controller will automatically adjust the speed of connected fans based on your CPU temperature. This intelligent control helps maintain optimal cooling, saves power, and reduces noise.

Figure 2.4: Graph illustrating how fan speed adjusts with CPU temperature to optimize cooling and reduce noise.
2.5 Host Restart Button Control
If you have connected your PC's restart button to the controller, you can press the restart button to cycle through the available lighting modes without using the remote control.
3. Maintenance
- Keep the controller and its components clean and free from dust. Use a soft, dry cloth for cleaning.
- Avoid exposing the controller to liquids or excessive moisture.
- Ensure proper airflow around the controller within your PC chassis to prevent overheating.
4. Troubleshooting
- Lights not responding: Check all power connections (SATA cable) and ensure the controller is receiving power. Verify that ARGB devices are correctly plugged into the controller.
- Remote control not working: Ensure the remote's battery is functional. If the controller is in motherboard sync mode, switch it back to remote control mode using the R/M button.
- Lights not syncing with motherboard: Ensure the 5V 3-pin ARGB sync cable is securely connected to both the controller and the motherboard. Verify that the controller is switched to motherboard sync mode via the remote. Check your motherboard's ARGB software settings.
- Fan speed not adjusting: Confirm the PWM temperature control signal line is correctly connected to the motherboard's CPU FAN header. Ensure fans are properly connected to the PWM ports on the controller.
- Brightness adjustment stuttering: Verify that the total power draw of your connected ARGB devices and fans does not exceed the controller's maximum load power (60W).
5. Specifications
| Product Name | Temperature control ARGB controller (music rhythm version) |
| Brand | COOLMOON (YSRSAI) |
| Rated Voltage | 12V (fan motor) + 5V (lamp beads) |
| Max. Current | 10A |
| Max. Load Power | 60W |
| PWM Interfaces | 8 (4-Pin) |
| ARGB Interfaces | 10 (3-Pin) |
| Control Modes | PWM intelligent remote control, Mainboard 5V ARGB Aura Sync, Air-sensing music rhythm, Wireless remote control, Host restart button |
| Remote Control RF Frequency | 433.92MHz |
| Controller Dimensions | 118mm (L) x 55mm (W) x 24mm (H) |
| Material | Plastics |
| Certification | CCC, CE, FCC |
6. User Tips
- Music Sync Experience: For the best music rhythm synchronization, ensure your external audio source (speakers or phone) is placed reasonably close to the controller to allow its built-in sound sensor to pick up the audio clearly. Users have noted its very good response to music.
- Motherboard Compatibility: If your motherboard does not have a native 5V 3-pin ARGB header, you might need an ARGB adapter or converter to utilize the motherboard sync features. Otherwise, the remote control mode offers extensive lighting options independently.
- Cable Management: Utilize the magnetic base and the compact design of the controller to neatly manage your fan and ARGB cables within your chassis for a clean build.
7. Warranty and Support
This COOLMOON ARGB Fan Hub and Controller comes with a 1-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
For technical support, troubleshooting assistance, or warranty inquiries, please contact your retailer or the official COOLMOON support channel.