POWERWIN PPS320

Contents

POWERWIN PPS320 Portable Power Station User Manual

Model: PPS320

1. Product Introduction

Thank you for choosing the POWERWIN PPS320 Portable Power Station. This compact and lightweight power station is designed to meet your energy needs for various activities such as camping, fishing, and emergencies. With a robust 320Wh capacity and a built-in 300W (surge 600W) pure sine wave inverter, the PPS320 can power most of your essential outdoor appliances and electronics, including mobile phones, mini freezers, radios, projectors, laptops, and other devices below 300W.

POWERWIN PPS320 Portable Power Station
Figure 1: POWERWIN PPS320 Portable Power Station, highlighting 320Wh/300W, LiFePO4 battery, and PD100W fast charging.
Multifunctional use of POWERWIN PPS320
Figure 2: Multifunctional use of the power station, showing output to TV, gas boiler, mini fridge, laptop, and input from solar panel, car charger, AC charger, and PD100W.

2. Safety Information and Precautions

Please read and understand all safety instructions before using the POWERWIN PPS320 Portable Power Station. Failure to follow these instructions may result in electric shock, fire, or serious injury.

General Safety Guidelines:

  • Do not disassemble or attempt to repair the product without authorization. This will void the warranty and may cause damage or injury.
  • Avoid exposing the power station to extreme temperatures (outside 32-104 Fahrenheit / 0-40 Celsius) or direct sunlight for prolonged periods, especially during charging, to prevent overheating and potential power failure.
  • Keep the device in a cool and well-ventilated area during use and charging.
  • Handle the product gently; do not bend, tread on, or drop it.
  • Ensure proper ventilation around the unit to prevent overheating.
Four protection methods of POWERWIN PPS320
Figure 3: The PPS320 features four protection methods: Over-charging, Over-voltage, Over-power, and Over-heat protection.

3. Package Contents

The standard package for the POWERWIN PPS320 Portable Power Station typically includes:

  • 1x POWERWIN PPS320 Portable Power Station
  • 1x AC Power Adapter
  • 1x Car Charger Cable
  • 1x User Manual (this document)

Optional Accessory: PWS110 110W Foldable Solar Panel Package Contents:

  • 1x 110 Watt Foldable Solar Panel
  • 1x Built-in PV Connector Extension Cable (200 cm / 78.74 in)
  • 1x Built-in Voltage Regulator (DC + USB Port Adapter)
  • 1x DC 5.5*2.1 Female Adapter Set
  • 1 x 7.9*0.9 mm DC Adapter
  • 1 x 6.6*3.0 mm DC Adapter
  • 1 x 5.5*2.5 mm DC Adapter
  • 1 x 3.5*1.5 mm DC Adapter
  • 1 x L01DC001-NB-R Adapter
  • 1x User Manual (for PWS110 Solar Panel)

4. Product Overview and Setup

The POWERWIN PPS320 features a clear display and multiple input/output ports for versatile use. Familiarize yourself with the ports and controls before operation.

POWERWIN PPS320 with charging options diagram
Figure 4: Diagram showing multiple DC & AC outputs and 4 recharging options for the PPS320.

Charging the Power Station:

The PPS320 can be recharged using several methods:

  1. Wall Outlet (AC Charging): Connect the provided AC power adapter to the input port of the power station and then to a standard wall outlet.
  2. Car Charger: Use the car charger cable to charge the power station from your vehicle's 12V cigarette lighter port.
  3. Solar Panel (e.g., PWS110 Solar Panel):
    1. Expand the solar panel and its four brackets on the back.
    2. Place the solar charging board under direct sunlight, ideally vertically (90°) for maximum efficiency.
    3. Connect the solar panel to the power station's input port (DC 10.8-23.5V).
    4. For optimal charging, ensure no shelters (buildings, plants) block the sunlight.
    Solar Panel Requirement specifications
    Figure 5: Solar Panel Requirement specifications for optimal charging.
  4. PD100W Port: Utilize the PD100W port for fast charging, allowing the power station to be fully recharged in approximately 4 hours.

You can also connect multiple solar panels in series or parallel to increase charging speed. For detailed instructions on the PWS110 Solar Panel, please refer to its dedicated user manual (PDF available here).

5. Operating Instructions

The PPS320 is designed for ease of use. Follow these steps to power your devices:

  1. Power On/Off: Press the "Power On/Off" button to activate or deactivate the power station.
  2. DC Output: Press the "DC ON/OFF" button to enable the DC output ports (USB-A, USB-C, 5.5mm DC port, Car Outlet). Connect your devices to the appropriate ports.
  3. AC Output: Press the "AC ON/OFF" button to enable the AC output ports (110V/220V 60Hz). Connect your AC-powered devices.
  4. Monitoring: The informative display will show the remaining battery percentage, estimated runtime, and current power output (Watts).
  5. Special Features: The power station includes features like Lighting and SOS Lighting for emergencies. Refer to the device's physical buttons for activation.
POWERWIN PPS320 Portable Power Station powering devices
Figure 6: The PPS320 powering a laptop, phone, and tablet simultaneously.
POWERWIN PPS320 used as a home power station
Figure 7: The PPS320 can serve as a reliable home power station during outages, powering essential appliances like a TV and fan.
POWERWIN PPS320 used outdoors for camping
Figure 8: The portable design of the PPS320 makes it ideal for outdoor use, such as camping.

Estimated Device Runtimes/Charges:

The following table provides estimated runtimes or charges for common devices based on a 320Wh capacity. Actual performance may vary.

Table of device runtimes/charges with PPS320
Figure 9: Estimated runtimes and charges for various devices using the PPS320.

To calculate the full charge time for your device: (320Wh / Your Device's Power) ≈ The Full Charge Time. *Based on laboratory data, the service time may vary.

6. Maintenance

To ensure the longevity and optimal performance of your POWERWIN PPS320 Portable Power Station, follow these maintenance guidelines:

  • Battery Maintenance: The 12.8V LiFePO4 battery should be charged every 3-6 months, even if not in use, to maintain its health.
  • Storage: Store the power station in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Cleaning: Use a dry, soft cloth to clean the exterior of the power station. Do not use harsh chemicals or abrasive materials.
  • Avoid Water: Keep the power station away from water and high humidity.
Automotive-Grade LiFePO4 battery diagram
Figure 10: Diagram illustrating the Automotive-Grade LiFePO4 battery used in the PPS320.

7. Troubleshooting

If you encounter issues with your POWERWIN PPS320, try the following common troubleshooting steps:

  • Device Not Charging:
    • Ensure the power station is turned on and has sufficient battery charge.
    • Check all cable connections to ensure they are secure.
    • Verify that the output port (DC or AC) is activated.
    • Confirm that the device you are trying to charge is compatible with the power station's output specifications (voltage, wattage).
  • Power Station Not Charging:
    • Ensure the charging cable and adapter are correctly connected to both the power station and the power source (wall outlet, car, solar panel).
    • If using a solar panel, ensure it is placed in direct sunlight and not obstructed. Check the solar panel's specifications (voltage, current) against the power station's input requirements.
    • Verify the power source is active and providing power.
  • Overheating:
    • If the power station feels excessively hot, disconnect all devices and charging inputs immediately.
    • Move the unit to a cooler, well-ventilated area.
    • Allow it to cool down completely before resuming use.

If the problem persists, please contact customer service for further assistance.

8. Specifications

POWERWIN PPS320 Portable Power Station:

FeatureSpecification
Model NumberPOWERWIN PPS320
Battery/Cell ClassificationLithium Iron Phosphate, LiFePO4 (12.8V)
Capacity320Wh
Wattage (Output)300W (Surge 600W)
AC Port (Output)110V/220V 60Hz 300W Sine Wave
5.5mm Port (Output)11.2-14.6V-10A
USB Output2x USB-A, 2x USB-C (PD100W input/output, PD60W output)
Charging Port (Input)Input 5.5mm, PD100W
Solar Panel InputDC 10.8-23.5V
Fast ChargeTwo-Way Fast Charge (PD100W)
Conversion Rate80%~85%
Item Weight4KG (9 Lbs)
Dimensions230*130*202mm
Operating Usage Temp32-104 Fahrenheit (0-40 Celsius)
CertificationsCE, FCC, RoHS, UL, MSDS
Special FeaturesUSB, Lighting, Cigarette Lighter Starter, SOS Lighting

PWS110 110W Foldable Solar Panel (Accessory):

FeatureSpecification
Solar Panel Power110 Watt ±5%
Maximum Voltage18V
Maximum Current6A
Open Circuit Voltage21.2 V
Short Circuit Current7.3 A
Output InterfacePV Connecter, DC 5525 8-25V / 12A (300W MAX), USB-A 5V/2.4A, USB-C 5-12V (PD 20W MAX)
Unfold Size1600*425*8mm
Folded Size425*375*55mm
Product Net Weight3.5 kg ±5% / 7.72 lbs ±5%
Working Temperature-10~65 °C / 14~149 °F

9. User Tips

  • The POWERWIN PPS320 features a pure sine wave inverter, making it safe for sensitive electronics.
  • The nominal capacity for the 110V output is 300 watts, with support for peak loads up to 600 watts.
  • This power station can effectively power appliances like a 120W refrigerator or a gas boiler.
  • When purchasing for Mexico, select the "US Plug" option for compatibility with 110V systems.
  • Solar panels are typically sold as separate accessories (e.g., PWS110) and are not integrated into the power station itself.

10. Warranty and Support

POWERWIN provides a warranty of 12 months from the date of purchase for the PPS320 Portable Power Station and the PWS110 Solar Panel accessory.

For any questions, technical support, or warranty claims, please contact our customer service team:

  • Email: Service@iittechnology.com
  • WhatsApp: +86 18277883447 / +886 911191408

Please note that the warranty does not cover damage caused by disassembling or unauthorized modification of the product.

11. Product Video Overview

Video 1: A detailed comparison between the Energizer PPS320 and POWERWIN PPS320, demonstrating identical features and performance. The video also showcases the power station charging various devices such as a laptop, car fridge, TV, and an electric stove, highlighting its versatility and power output.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.