1. Introduction
This manual provides essential information for the safe and effective use, installation, and maintenance of your Avhrit Mini Chainsaw Replacement Chains. These chains are designed for homeowners and landscapers, offering low-vibration and low kickback performance. They feature hardened rivets for durability and chrome-plated cutters for sharp, efficient cutting. Each chain comes with protective oil and includes sharpening tools for extended life.
Please read this manual thoroughly before use and keep it for future reference.
2. Safety Warnings
2.1 General Power Tool Safety
WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury. Save all warnings and instructions for future reference.
- Work Area Safety:
- Keep work area clean and well-lit. Cluttered or dark areas invite accidents.
- Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
- Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
- Electrical Safety:
- Power tool plugs must match the outlet. Never modify the plug in any way. Unmodified plugs and matching outlets will reduce risk of electric shock.
- Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
- Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
- Do not abuse the cord. Never use the cord for carrying, pulling, or unplugging the power tool. Keep cord away from heat, oil, sharp edges, or moving parts. Damaged or entangled cords increase the risk of electric shock.
- Personal Safety:
- Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication.
- Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
- Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool.
- Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
- Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
- Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
- Power Tool Use and Care:
- Do not force the power tool. Use the correct power tool for your application.
- Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
- Disconnect the plug from the power source and/or remove the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
- Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
- Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use.
- Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
- Use the power tool, accessories, and tool bits, etc., in accordance with these instructions, taking into account the working conditions and the work to be performed.
- Keep handles and grasping surfaces dry, clean, and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.
- Battery Tool Use and Care:
- Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
- Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
- When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws, or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
- Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
- Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
- Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130°C (265°F) may cause explosion.
- Follow all charging instructions and do not charge the battery pack or tool outside of the temperature range specified in the instructions. Improperly charging or at temperatures outside the specified range may damage the battery and increase the risk of fire.
- Service:
- Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
- Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.
2.2 Chainsaw Specific Safety Instructions
WARNING: Cutting chain can cause injury if incorrectly fitted to a chainsaw or if the saw is used improperly. Install, adjust and maintain the chain as recommended.
- Keep all parts of the body away from the saw chain when the chainsaw is operating. Before you start the chainsaw, make sure the saw chain is not contacting anything. A moment of inattention while operating a chainsaw may cause entanglement of your clothing or body with the saw chain.
- Always hold the chainsaw with your right hand on the rear handle and your left hand on the front handle. Holding the chainsaw with a reversed hand configuration increases the risk of personal injury and should never be done.
- Hold the chainsaw only by insulated gripping surfaces, because the saw chain may contact hidden wiring or its own cord. Saw chains contacting a “live” wire may make exposed metal parts of the chainsaw “live” and could give the operator an electric shock.
- Wear eye protection. Further protective equipment for hearing, head, hands, legs, and feet is recommended. Adequate protective equipment will reduce personal injury caused by flying debris or accidental contact with the saw chain.
- Do not operate a chainsaw in a tree, on a ladder, from a rooftop, or on any unstable support. Operating a chainsaw in this manner could result in serious personal injury.
- Always keep proper footing and operate the chainsaw only when standing on a fixed, secure, and level surface. Slippery or unstable surfaces may cause a loss of balance or control of the chainsaw.
- When cutting a limb that is under tension, be alert for spring back. When the tension in the wood fibers is released, the spring-loaded limb may strike the operator and/or throw the chainsaw out of control.
- Use extreme caution when cutting brush and saplings. The thin material may catch in the saw chain and be whipped toward you or pull you off balance.
- Carry the chainsaw by the front handle with the chainsaw switched off and away from your body. When transporting or storing the chainsaw, always fit the guide bar cover. Proper handling of the chainsaw will reduce the likelihood of accidental contact with the moving saw chain.
- Follow instructions for lubricating, chain tensioning, and changing guide bar and chain. An improperly tensioned or lubricated chain may break or increase the chance for kickback.
- Cut wood only. Do not use the chainsaw for purposes not intended. For example: do not use the chainsaw for cutting plastic, masonry, or non-wood building materials. Use of the chainsaw for operations different from intended could result in a hazardous situation.
- Do not attempt to fell a tree until you understand the risks and how to avoid them. Serious injury to the operator or bystanders can occur during tree felling.
- Follow all instructions when clearing jammed material, storing, or servicing the chainsaw. Ensure the switch is off and the battery is removed. Unexpected operation of the chainsaw while clearing jammed material or servicing may result in serious personal injury.
2.3 Causes and Prevention of Kickback
Kickback may occur when the nose or tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut. Tip contact in some cases may cause a sudden reverse reaction, kicking the guide bar up and back towards the operator. Pinching the saw chain along the top of the guide bar may push the guide bar rapidly back towards the operator. Either of these reactions may cause you to lose control of the saw which could result in serious personal injury. Do not rely exclusively upon the safety devices built into your saw. As a chainsaw user, you should take several steps to keep your cutting jobs free from accident or injury.
- Maintain a firm grip, with thumbs and fingers encircling the chainsaw handles, with both hands on the saw and position your body and arm to allow you to resist kickback forces. Kickback forces can be controlled by the operator, if appropriate precautions are taken. Do not let go of the chainsaw.
- Do not overreach and do not cut above shoulder height. This helps prevent unintended tip contact and enables better control of the pruning saw in unexpected situations.
- Only use replacement guide bars and saw chains specified by the manufacturer. Incorrect replacement guide bars and saw chains may cause chain breakage and/or kickback.
- Follow the manufacturer’s sharpening and maintenance instructions for the saw chain. Decreasing the depth gauge height can lead to increased kickback.
3. Explanation of Symbols
| Symbol | Description |
|---|---|
| ! | Warning: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. |
| Read the operator's manual. Read and follow all safety precautions contained in the owner's manual. Failure to follow instructions may result in serious injury to the user. | |
| Wear safety glasses/face shield, protective helmet, and hearing protection. | |
| Wet conditions warning. Do not expose to rain. | |
| Do not touch the moving saw chain. | |
| Hold the garden pruner firmly with both hands. | |
| Remove the battery during work breaks, transport, storage, maintenance, or repair. | |
| Keep bystanders away. | |
| Gloves. Wear non-slip, heavy-duty gloves. | |
| Correct direction of cutting teeth. | |
| Beware of chainsaw kickback and avoid contact with the tip of the bar. |
4. Technical Specifications
| Specification | Value |
|---|---|
| Model (Chainsaw) | AC60 (OLC-402) |
| Nominal Voltage | 21V |
| Standard Battery Cartridge | SE2000F (T1820-5) |
| Net Weight (with battery) | 1.36kg |
| Standard Guide Bar Length | 152.4 mm (6") |
| Battery Capacity | 2000 mAh |
| Charge Time | 2-3 hours |
| Working Time | 15-25 min |
| AC Input Voltage | 100-240 V |
| Input Frequency | 50/60 Hz |
Chain Specifications:
- 4-inch Chain: Bar Length 4'', Chain Gauge 0.43, Chain Pitch 1/4'', Drive Links 28.
- 6-inch Chain (example 36DL): Bar Length 6'', Pitch 1/4'', Gauge .043'', Drive Links 36.
- 8-inch Chain (example 47DL): Bar Length 8'', Pitch 1/4'', Drive Links 47, Gauge .043''.
Note: Please verify your chainsaw chain BAR LENGTH, PITCH, GAUGE AND DRIVE LINKS before purchasing, as the same mini chainsaw model may be equipped with different chains. If you are unsure, please contact your chainsaw seller.
5. Assembly
WARNING: Insert the rechargeable battery only after the device is completely assembled. If the device is accidentally switched on, there is a risk of injury.
The assembly process is similar for all models, using the CH600 as an example.

- Unscrew: Use the wrench to unscrew the bolts counter-clockwise.

Figure 5.2: Unscrewing the bolts. - Open Cover and Remove Chain: Open the cover and remove the existing chain.

Figure 5.3: Opening the cover and removing the chain. - Position Chain: Position the new chain as shown in the figure, ensuring the guide goes in front, the cutter faces forward, and the drive link points forward.

Figure 5.4: Correct chain positioning. 
Figure 5.5: Detailed view of chain installation direction. - Install Chain on Guide Plate: Install the chain onto the guide plate.

Figure 5.6: Installing the chain onto the guide plate. - Adjust Pin: Adjust the pin with a wrench.

Figure 5.7: Adjusting the pin. - Align Pin with Hole: Align the pin with the corresponding hole.

Figure 5.8: Aligning the pin. - Close Cover: Place the cover back.

Figure 5.9: Closing the cover. - Tighten Screw: Tighten the screw to secure the cover.

Figure 5.10: Tightening the screw.
6. Setup: Chain Tension Adjustment
A new chain will stretch during its initial use. It is crucial to frequently check and adjust the chain tension, as a loose chain can easily derail, leading to rapid wear of the chain and guide plate.
To adjust the tension, turn the adjustment screw clockwise to tighten the chain, and counter-clockwise to loosen it.
- Loosen the Nut: Before adjusting the chain, loosen the nut. A slightly loose space is necessary for chain adjustment.

Figure 6.1: Loosening the nut. - Tighten the Screw: Use a screwdriver to tighten the adjustment screw.

Figure 6.2: Tightening the adjustment screw. - Check Tension Gap: The correct tension is achieved when there is a 3mm-5mm gap when lifting a single link from the bar.

Figure 6.3: Checking the 3mm-5mm tension gap. 
Figure 6.4: Visual guide for correct chain tension. - Tighten the Nut: Once the desired tension is achieved, tighten the nut to secure the adjustment.

Figure 6.5: Tightening the nut after adjustment.
Note: If the chain cannot be adjusted, please check if the chain has fallen off. If it has, follow the first step of reinstallation.
7. Operation
7.1 General Usage Tips
- Do not press hard on the chainsaw during use.
- Try to avoid branches that might cause the chain to jam.
- To prevent overheating of the guide plate and chain, add lubricating oil to the guide plate slot and chain before use. For every approximately 10 sections of sawing, lubricating oil should be added.
- When operating, keep your other hand at least 15 cm away from the cutting area of the blade, and your hand should not be placed in the knife edge.
- To ensure the best service life of the chainsaw, do not overload the equipment and do not cut branches with a diameter exceeding 150 mm. Otherwise, the chain may get stuck.
- Do not use this equipment on rainy days.
7.2 Battery Installation and Removal
IMPORTANT: Ensure the exterior of the battery is clean and dry before connecting it to the charger or the machine.
- Installation: Insert the battery into the base of the machine as shown in the figure. Push the battery further forward until it clicks into place. (Ensure to align the slots and inserts.)

Figure 7.1: Inserting the battery into the chainsaw. - Removal: Press the battery release button. Pull the battery out of the chainsaw.

Figure 7.2: Removing the battery from the chainsaw.
7.3 Battery Charging
WARNING: Do not expose the battery to extreme conditions such as high temperatures or shocks. Otherwise, personal injury may result due to electrolyte leakage.
- Before charging, ensure the battery surface is clean and dry.
- Before first use, the battery must be fully charged.
- The most suitable temperatures for charging the battery are between 20°C and 27°C (68°F-77°F). During charging, batteries must be placed in a well-ventilated area.
- Do not charge non-rechargeable batteries.

| Indicator Light | Status |
|---|---|
| Red | Charging |
| Green | Charging completed |
8. Maintenance
WARNING: Before cleaning and maintenance, always switch off the machine and remove the battery from the machine.
- Clean the chain thoroughly after each use.
- Rub the chain with lubricating oil and spray with a metal protective spray.

Figure 8.1: Oiling the chainsaw chain. - Do not spray water on the equipment or immerse it in water. Otherwise, it could cause electric shock.
- Regularly clean the machine casings with a soft cloth, preferably after each use. Keep the fan, machine room, and equipment handle clean.
- Remove very stubborn dirt using a soft, damp cloth. For very stubborn dirt, use a soft cloth soaked in soapy water.
- Do not use solvents such as gasoline, alcohol, ammonia, etc. Chemicals like these will damage the synthetic components.
- When the machine is not used for a long time, it is best to store the battery in a charged state. The battery is used to ensure that it is recharged at least once every 3 months.
8.1 Chain Sharpening
The product includes a small file for sharpening the chain teeth. Regular sharpening helps maintain cutting performance and extends the life of the chain.

9. Troubleshooting
The machine may stop for the following reasons:
- Motor Overheating Protection: To prevent the motor from burning out, a temperature protection mechanism (120°C) is set. If the machine stops due to overheating, wait for it to cool down (typically about 20 minutes) before resuming use.
- Battery Over-discharge or Empty Battery: If the battery is over-discharged or empty, replace it with a charged battery to continue working.
- Battery Overheating Protection: If the battery overheats, place it in a cool place and wait for it to cool down (typically 20-30 minutes) before continuing to use it.
- Battery Temperature for Charging: If the cell temperature is above 45°C, the battery cannot be charged, and the charger will show a green light. Cool the battery to below 45°C before charging (cooling time is usually 20-30 minutes).
- Chain Jamming: If the chain gets stuck, it might be due to overloading or cutting branches larger than 150mm in diameter. Reduce the load and ensure proper cutting technique.
10. User Tips
- Always verify your chainsaw chain BAR LENGTH, PITCH, GAUGE, and DRIVE LINKS before purchasing a replacement to ensure compatibility.
- Regularly oil your chain, especially after every 7 uses, to extend its life and maintain smooth operation.
- Utilize the included sharpening file to keep your chain teeth sharp for optimal cutting performance and durability.
- Ensure the chain is correctly installed and tensioned (3mm-5mm gap) to prevent derailment and excessive wear.
11. Disposal
11.1 Disposal of the Appliance
This product is marked with a symbol indicating that it should not be discarded with household waste. It must be returned to a collection system for electrical and electronic waste. This ensures proper recycling and reduces environmental impact, as electrical and electronic equipment can contain hazardous substances.
11.2 Disposal of an Exhausted Battery Pack
To preserve natural resources, please recycle or dispose of the battery pack properly. This battery pack contains Li-ion batteries. Consult your local waste authority for information regarding available recycling and/or disposal options. Discharge your battery pack by operating your tool, then remove the battery pack from the tool housing and cover the battery pack connections with heavy-duty adhesive tape to prevent short circuit and energy discharge. Do not attempt to open or remove any of the components.
11.3 Disposal of the Packaging
The packaging consists of cardboard and correspondingly marked plastics that can be recycled. Make these materials available for recycling.
12. Warranty and Support
12.1 Warranty Policy
Every Avhrit tool is thoroughly inspected and tested before leaving the factory. It is guaranteed to be free from manufacturing and material defects for a period of ONE YEAR from the original purchase date.
If a problem occurs within this one-year period, return the COMPLETE tool to Avhrit service centers. If inspection shows that the problem is caused by faulty workmanship or material, Avhrit will repair (or, at our discretion, replace) it free of charge.
This warranty does not apply if:
- Repairs have been carried out or attempted by others.
- Repairs are necessary due to normal wear and tear.
- The tool has been abused, misused, or improperly maintained.
- Modifications have been made to the tool.
12.2 Support
For after-sales support, please contact: support@avhritus.com
You can also refer to the official user manual (PDF) for the Avhrit Mini Chainsaw OLC-402 for additional details: View User Manual (PDF)