1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Haier YR-E17 Wired LCD Touch Panel Controller. This controller is designed for use with Haier Central Air-Conditioning Duct Type Indoor Units, offering convenient and precise control over your air conditioning system. Please read this manual thoroughly before using the product to ensure proper function and safety.
2. Parts and Functions
The Haier YR-E17 controller consists of the main LCD touch panel and its internal components, designed for wired communication with your air conditioning unit.
2.1 Controller Components
- Front Panel: Features an LCD touch screen for user interaction and display of system status.
- Rear Panel: Contains wiring terminals for connection to the indoor unit and mounting points for installation.
- Internal Circuit Board: Houses the electronic components responsible for processing commands and communicating with the air conditioning system.

Figure 1: Front view of the Haier Wired LCD Touch Panel Controller, showing the LCD screen and touch area.

Figure 2: Internal circuit board of the controller, displaying various electronic components.

Figure 3: Rear view of the controller, indicating the 'PRESS TO OPEN' mechanism and labeled wiring terminals (AC, DC, COM, GND, DATA).
2.2 Package Contents
Upon opening the package, you should find the following items:
- Haier YR-E17 Wired LCD Touch Panel Controller
- Mounting Screws
- Wire Connectors
- Operation & Installation Manual (this document)

Figure 4: Package contents, showing the controller, mounting hardware, and the included manual.
3. Specifications
Below are the technical specifications for the Haier YR-E17 Wired LCD Touch Panel Controller:
| Feature | Specification |
|---|---|
| Model Number | 0150401331H (YR-E17) |
| Wireless Communication | IR (Infrared) |
| Use | Air Conditioner, Universal |
| Support APP | No |
| Frequency | 433 MHz |
| Channel | 1 |
| Color | White |
| Battery Type | Not included |
| Condition | New |
| Origin | Mainland China |
| Certification | NONE |
| Note on Cable | Only the panel, no cable inside. Cable needs to be purchased separately. |
4. Setup and Installation
Proper installation is crucial for the optimal performance of your wired controller. It is recommended that installation be performed by a qualified technician.
4.1 Important Pre-installation Notes
- Cable Requirement: The necessary connection cable is NOT included with this product and must be purchased separately. Ensure the cable length is appropriate for your installation distance.
- Power Disconnection: ALWAYS ensure that the power supply to the air conditioning indoor unit is completely disconnected before beginning any installation or wiring work to prevent electric shock.
4.2 Mounting the Controller
- Choose a suitable location for the controller, typically at eye level in a central area of the room, away from direct sunlight, heat sources, or drafts.
- Carefully open the controller's rear panel by pressing the designated area (refer to Figure 3: 'PRESS TO OPEN').
- Secure the rear panel to the wall using the provided mounting screws. Ensure it is level and firmly attached.
4.3 Wiring Instructions
Refer to Figure 3 for the terminal layout on the rear panel. Connect the communication cable from your Haier indoor unit to the controller's terminals as follows:
- AC: Connect the Alternating Current (AC) power line.
- DC: Connect the Direct Current (DC) power line.
- COM: Connect the Common communication line.
- GND: Connect the Ground line.
- DATA: Connect the Data communication line.
Use the provided wire connectors to ensure secure and insulated connections. Double-check all wiring for correctness before proceeding.
4.4 Finalizing Installation
- Once wiring is complete, carefully reattach the front panel of the controller to the mounted rear panel.
- Restore power to the air conditioning indoor unit. The controller's LCD screen should illuminate, indicating successful power-up.
5. Operation
The Haier YR-E17 controller features an intuitive LCD touch panel for easy operation of your air conditioning system.
5.1 Basic Functions
- Power On/Off: Tap the designated power icon on the screen to turn the air conditioner on or off.
- Temperature Adjustment: Use the up/down arrows or a slider on the touch screen to set your desired temperature.
- Mode Selection: Tap the mode icon to cycle through available operating modes (e.g., Cool, Heat, Fan, Dry, Auto).
- Fan Speed: Adjust the fan speed (e.g., Low, Medium, High, Auto) by tapping the fan icon.
5.2 Advanced Settings
Depending on your specific Haier indoor unit model, the controller may offer additional features such as:
- Timer functions (On/Off scheduling)
- Sleep mode
- Swing function for louvers
- Error code display
Refer to the on-screen menus and your air conditioning unit's manual for detailed instructions on these advanced features.
6. Maintenance
The Haier YR-E17 controller requires minimal maintenance to ensure long-lasting performance.
6.1 Cleaning the Controller
- Wipe the LCD touch screen and the controller's casing with a soft, dry, or slightly damp cloth.
- Do NOT use abrasive cleaners, solvents, or chemical sprays, as these can damage the screen and plastic components.
- Ensure no liquid enters the controller's openings.
6.2 General Care
- Avoid exposing the controller to extreme temperatures, high humidity, or direct sunlight for extended periods.
- Do not attempt to open the controller or perform any repairs yourself. There are no user-serviceable parts inside.
7. Troubleshooting
If you encounter issues with your Haier YR-E17 controller, try the following basic troubleshooting steps before contacting support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Controller screen is blank / No power | No power supply to the AC unit or controller; Loose wiring connection. | Check if the AC unit has power. Verify all wiring connections (AC, DC, COM, GND, DATA) are secure. Ensure power is restored to the AC unit. |
| Controller unresponsive to touch | Temporary software glitch; Screen obstruction. | Restart the AC unit by cycling its power. Ensure the screen is clean and free from debris. |
| Air conditioner not responding to commands | Communication error; AC unit issue. | Check wiring connections between the controller and the indoor unit. Ensure the indoor unit is powered on and functioning correctly. |
| Incorrect temperature readings | Sensor obstruction or malfunction. | Ensure the controller is not exposed to direct heat sources or drafts that could affect its internal temperature sensor. |
If the problem persists after attempting these solutions, please contact customer support.
8. User Tips
- Optimal Placement: For accurate temperature sensing, install the controller in a location that represents the average temperature of the room, avoiding direct sunlight or areas near windows/doors.
- Cable Management: When installing, ensure the communication cable is routed neatly and securely to prevent accidental damage or disconnections.
- Gentle Touch: The LCD is a touch panel; operate it with a gentle touch rather than excessive force to prolong its lifespan.
9. Warranty and Support
9.1 Product Warranty
This Haier YR-E17 Wired LCD Touch Panel Controller comes with a 3-month warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by improper installation, misuse, accidents, unauthorized repairs, or natural disasters.
9.2 Customer Support
For technical assistance, warranty claims, or any questions regarding your controller, please contact your original point of purchase or the authorized Haier service center in your region. Please have your product model number (YR-E17 or 0150401331H) and purchase details ready when contacting support.