COOLMOON YSR-DIM

Contents

COOLMOON ARGB PWM Fan Hub User Manual

Model: YSR-DIM | Brand: COOLMOON

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your COOLMOON 5V/3Pin ARGB 4Pin Fan PWM HUB. This intelligent controller is designed to enhance your PC's cooling performance and aesthetic appeal with advanced ARGB lighting, music rhythm synchronization, and precise temperature control.

2. Safety Information

⚠ WARNING: Not suitable for children under three years of age.

Always ensure proper handling and installation to prevent damage to the device or other components. Do not attempt to disassemble or modify the controller.

3. Package Contents

Please check the package for the following items:

  • 1 x COOLMOON ARGB PWM Fan Hub Controller
  • 1 x Wireless Remote Control
  • 1 x SATA Power Cable
  • 1 x Motherboard Sync Line (5V 3-pin ARGB)
  • 1 x PWM Temperature Control Signal Line
  • 1 x Instruction Manual (this document)

4. Key Features

  • Music Rhythm Synchronization: Features 6 kinds of musical rhythms. The lights move with external music played via stereo or mobile phone.
  • PWM Intelligent Temperature Control: Connects to the motherboard CPU FAN interface to automatically adjust fan speed based on CPU temperature, optimizing cooling and reducing noise.
  • 5V ARGB Aura Sync: Supports 5V 3-pin ARGB motherboards (ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync) for software-controlled lighting synchronization.
  • Wireless Remote Control: Strong signal radio frequency (433.92MHz) remote allows control even when the controller is inside the PC case.
  • 368 Built-in Light Effect Modes: Offers a wide range of lighting effects, adjustable speed, and brightness.
  • Multi-Interface Design: Provides 8x 4-pin PWM interfaces for fans and 10x 3-pin ARGB interfaces for lighting devices.
  • Restart Button Control: Connect the host's restart button to switch lighting effects conveniently.
  • Magnetic Installation: The controller's bottom features a large area magnet for easy and secure attachment to the chassis.

5. Specifications

Attribute Value
Brand NameCOOLMOON (YSRSAI)
ModelYSR-DIM
Item TypeRGB Controller
MaterialPlastics
Connection ModeWire
Power SourceDC
Rated Voltage12V (fan motor) + 5V (lamp beads)
CurrentMax 10A
Wattage / Max. Load Power60W
Applicable Lights5V LED STRIP
Light ColorARGB
Controlled MethodRemote, Motherboard Sync, Music Rhythm, Host Restart Button
Number of Interfaces8x 4-pin PWM, 10x 3-pin ARGB
RF Frequency (Remote)433.92MHz
Controller Dimensions (LxWxH)118 x 55 x 24 mm (4.65 x 2.17 x 0.94 in)
Total WeightApprox. 0.15 kg
CertificationCCC, CE, UL
OriginMainland China

6. Setup Instructions

  1. Unpack and Inspect: Carefully unpack the controller and all accessories. Verify that all items listed in the "Package Contents" section are present and undamaged.
  2. Mount the Controller: Utilize the magnetic design on the bottom of the controller to securely attach it to any iron surface inside your PC chassis.
  3. Connect Power: Connect the provided SATA Power Cable from your PC's power supply unit (PSU) to the SATA power input on the controller.
  4. Connect Fans: Connect your 4-pin PWM fans to the 8 available 4-pin PWM interfaces on the controller.
  5. Connect ARGB Devices: Connect your 5V 3-pin ARGB lighting devices (e.g., LED strips, ARGB fans) to the 10 available 3-pin ARGB interfaces on the controller.
  6. Motherboard Synchronization (Optional): If you wish to synchronize lighting with your motherboard's ARGB software (e.g., ASUS Aura Sync), connect the Motherboard Sync Line from the controller to your motherboard's 5V 3-pin ARGB header.
  7. Temperature Control Signal (Optional): For intelligent PWM temperature control, connect the PWM Temperature Control Signal Line from the controller to your motherboard's CPU FAN interface.
  8. Restart Button Connection (Optional): To use your PC's restart button to cycle through lighting effects, connect the host's restart button cable to the designated restart button input on the controller.
Controller installation diagram showing connections for fans, ARGB devices, SATA power, motherboard sync, and restart button.
Figure 1: Controller Installation Diagram. Please ensure correct power supply interface connection to avoid equipment damage.
Diagram showing the various interfaces on the controller: CPU cooler, PWM1-8, ARGB1-10, power supply, motherboard synchronization, and temperature control signal input.
Figure 2: Controller Interface Layout.
Magnetic design of the controller for easy installation inside a PC chassis.
Figure 3: Magnetic Design for Easy Installation.

7. Operating Instructions

7.1. Using the Wireless Remote Control

The controller is equipped with a wireless remote control for convenient adjustment of lighting effects and fan speeds. The remote operates on an RF frequency of 433.92MHz, allowing control even when the controller is hidden inside the PC case.

Detailed remote control layout with button functions for light modes, speed, brightness, and music modes.
Figure 4: Remote Control Button Functions (Example Layout).
Remote control functions including automatic mode, on/off, speed, brightness, next mode, and monochrome static mode.
Figure 5: Remote Control Functions.
  • Power Button: Turn lights On/Off.
  • R/M Button: Switch between Motherboard Mode and Remote Control Mode.
  • Speed +/-: Adjust the speed of dynamic lighting effects.
  • Mode +/-: Cycle through the 368 built-in light effect modes.
  • Brightness +/-: Adjust the brightness of the lighting.
  • Color Buttons (R, G, B, White, etc.): Select static colors or monochrome modes.
  • Music Mode Buttons (1-6): Activate different music rhythm synchronization modes.
  • Lock/Unlock: Long press for 3 seconds to make the controller and remote control one-to-one, preventing interference. Long press again for 3 seconds to release and restore original code.

7.2. Music Rhythm Synchronization

The controller features a built-in sound sensing source. To activate music rhythm effects:

  1. Ensure the controller is in Remote Control Mode (if not using motherboard sync).
  2. Play music externally using a stereo system or mobile phone near the PC chassis.
  3. Select one of the 6 music rhythm modes using the remote control. The lights will synchronize with the rhythm of the music.
The ARGB PWM Fan Hub's music rhythm feature, synchronizing lighting with external audio.
Figure 6: Music Rhythm Feature in Action.

7.3. PWM Intelligent Temperature Control

When the PWM Temperature Control Signal Line is connected to the motherboard's CPU FAN interface, the controller intelligently manages fan speeds:

  • As CPU temperature increases, fan speeds automatically increase to enhance cooling.
  • As CPU temperature decreases, fan speeds automatically reduce, saving power and minimizing noise.
Graph illustrating PWM intelligent temperature control, showing fan speed, CPU temperature, and host noise relationship.
Figure 7: PWM Temperature Control Dynamics.

7.4. 5V ARGB Aura Sync

If the Motherboard Sync Line is connected to a compatible 5V 3-pin ARGB header on your motherboard, you can control the lighting effects directly through your motherboard's software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync).

  1. Ensure the controller is set to Motherboard Mode using the R/M button on the remote.
  2. Install and open your motherboard's ARGB control software.
  3. Customize lighting effects, colors, and patterns directly from the software interface.
5V ARGB Aura Sync compatibility with motherboard software for synchronized lighting control.
Figure 8: ARGB Aura Sync Software Interface.

7.5. Host Restart Button Control

If connected, pressing your PC's physical restart button will cycle through the various built-in lighting effects on the controller.

7.6. Product Demonstration Video

Video 1: Demonstration of COOLMOON ARGB PWM Fan Hub's lighting effects and music synchronization.

8. Maintenance

  • Keep the controller and remote control clean and free from dust. Use a soft, dry cloth for cleaning.
  • Avoid exposing the device to excessive moisture or extreme temperatures.
  • Ensure all cable connections are secure and free from kinks or damage.

9. Troubleshooting

  • Lights not responding to remote:
    • Check if the controller is receiving power (SATA power cable connected).
    • Ensure the remote control has working batteries.
    • Verify the controller is in Remote Control Mode (press R/M button).
    • If multiple controllers are present, try re-pairing the remote by long-pressing the lock button for 3 seconds.
  • Lights not synchronizing with motherboard software:
    • Ensure the Motherboard Sync Line is correctly connected to a 5V 3-pin ARGB header.
    • Verify the controller is set to Motherboard Mode (press R/M button).
    • Check your motherboard's ARGB software settings.
  • Fan speed not adjusting with temperature:
    • Confirm the PWM Temperature Control Signal Line is connected to the CPU FAN header on your motherboard.
    • Check BIOS/UEFI settings for fan control to ensure PWM mode is enabled for the CPU fan header.
  • Brightness adjustment stutters:
    • Verify power rating compatibility. Ensure the total wattage of connected LED strips and fans does not exceed the controller's 60W maximum load.
  • Music rhythm not working:
    • Ensure external music is playing loudly enough for the controller's sound sensor to detect it.
    • Check if the controller is in a music rhythm mode.
  • General dimming issues:
    • If dimming fails to respond, check network connectivity (if using a Wi-Fi/Zigbee variant, though this product is RF remote controlled).

10. User Tips

  • For optimal music rhythm synchronization, place your audio source (speaker/phone) close to the PC chassis where the controller is installed.
  • When connecting many ARGB devices, ensure the total power consumption does not exceed 60W to prevent damage.
  • If you experience any issues with lighting effects, try switching between Motherboard Mode and Remote Control Mode to isolate the problem source.

11. Warranty and Support

This product comes with a 1-year warranty from the date of purchase.

For further assistance or to view the official user manual in PDF format, please refer to the following document:

View User Manual (PDF)

For technical support, please contact your retailer or the manufacturer (YSRSAI / COOLMOON) directly.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.