SUNON SL28DD-3H

Contents

SUNON SL28DD-3H Quartz Watch Movement Instruction Manual

Model: SL28DD-3H | Brand: SUNON

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the SUNON SL28DD-3H Quartz Watch Movement. This movement is designed with three hands (hour, minute, second) and features both day and date display functions. It is recognized as a viable alternative to the Miyota 2105 movement.

Front view of SUNON SL28DD-3 movement with date and day wheels, and crown stem.
Figure 1: Front view of the SL28DD-3H movement, showing the day and date wheels, and the crown stem.
Back view of SUNON SL28DD-3 movement, revealing the battery compartment and internal components.
Figure 2: Rear view of the SL28DD-3H movement, illustrating the battery compartment and internal circuitry.

2. Specifications

FeatureDetail
ModelSL28DD-3H
TypeQuartz Movement
Diameter (Φ)23.7mm
Height4.15mm
Accuracy±60 seconds per month
Function3 Hands (Hour, Minute, Second), Day, Date
CompatibilityCan replace Miyota 2105 movement
Detailed technical drawings of the SUNON SL28DD-3H movement, including dimensions for casing, hand fitting, and battery placement.
Figure 3: Technical drawings and dimensions for the SL28DD-3H movement, essential for installation and repair.

3. Components Overview

The SL28DD-3H movement features standard watch display components and a multi-position crown for adjustments.

Diagram illustrating the watch display with hour, minute, and second hands, along with the crown positions (Normal, 1st, 2nd) and indicators for Date and Day of the week.
Figure 4: Display diagram of the SUNON SL28DD-3H, showing hands, crown positions, and day/date indicators.
  • Hour Hand: Indicates the hour.
  • Minute Hand: Indicates the minute.
  • Second Hand: Indicates the second.
  • Crown: Used for setting time, date, and day. It has three positions:
    • Normal Crown Position: The crown is fully pushed in. The watch runs normally.
    • 1st Position: The crown is pulled out one click. Used for setting the date and day of the week.
    • 2nd Position: The crown is pulled out two clicks. Used for setting the hour and minute hands.
  • Date Display: Shows the current date.
  • Day of the Week Display: Shows the current day of the week.

4. Setup and Installation

Installation of a watch movement requires specialized tools and expertise. It is highly recommended that installation be performed by a qualified watchmaker or technician to prevent damage to the movement or watch case.

  • Preparation: Ensure your workspace is clean and dust-free. Have all necessary watchmaking tools readily available.
  • Casing: Carefully place the movement into the watch case, ensuring proper alignment with the dial and crown opening. Refer to the technical drawings (Figure 3) for precise dimensions and fitting details.
  • Hand Fitting: Attach the hour, minute, and second hands to their respective pinions. Ensure they are securely fitted and do not touch each other or the dial.
  • Crown Stem Insertion: Insert the crown stem into the movement. Ensure it clicks into place and allows for proper crown operation.

5. Operating Instructions

5.1 Setting the Time

  1. Pull the crown out to the 2nd position (fully extended).
  2. Turn the crown in either direction to set the hour and minute hands to the desired time.
  3. Once the time is set, push the crown back to the normal position. The second hand will begin to run.

5.2 Setting the Date

  1. Pull the crown out to the 1st position (one click out).
  2. Turn the crown counter-clockwise to set the date.
  3. Important Note: If the date is set between approximately 9:00 PM and 1:00 AM, the date may not change correctly on the following day. Adjust the time outside of this window if possible, or re-adjust the date after this period.
  4. After the date has been set, push the crown back to the normal position.

5.3 Setting the Day of the Week

  1. Pull the crown out to the 1st position (one click out).
  2. Turn the crown clockwise to set the day of the week.
  3. Important Note: Similar to the date, if the day of the week is set between approximately 9:00 PM and 1:00 AM, it may not change correctly on the following day. Adjust the time outside of this window if possible, or re-adjust the day after this period.
  4. After the day of the week has been set, push the crown back to the normal position.

6. Maintenance

  • Battery Replacement: The quartz movement is powered by a watch battery. When the watch stops or the second hand begins to skip, it indicates a low battery. Battery replacement should be performed by a professional watchmaker to ensure the correct battery type is used and the movement is not damaged during the process.
  • Cleaning: Keep the movement free from dust and moisture. If the movement requires cleaning, it should be done by a professional.
  • Storage: If the watch is not going to be used for an extended period, consider having the battery removed by a professional to prevent potential leakage and damage to the movement.

7. Troubleshooting

  • Date/Day Not Changing: If the date or day of the week does not change at midnight, ensure that you did not set it between 9:00 PM and 1:00 AM. If this occurs, manually advance the time past 1:00 AM and then reset the date/day.
  • Watch Not Running: Check if the crown is fully pushed into the normal position. If it is, the battery may need replacement.
  • Inaccurate Time: While the movement has an accuracy of ±60 seconds per month, significant deviation may indicate a need for servicing or battery replacement.

8. User Tips

  • This movement is a reliable and precise replacement, often used as an alternative to the Miyota 2105. Users report good quality and functionality.
  • For optimal performance and longevity, always handle the movement with care and avoid exposing it to strong magnetic fields or extreme temperatures.
  • When replacing the movement, ensure all components are clean and properly seated for a perfect fit and function.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.