Introduction
Thank you for choosing the LEHX Pro Android 14 Car Radio Multimedia Player. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and a safe driving experience. Please read this manual thoroughly before using the product.
Before installation, it is recommended to test the unit to ensure it functions correctly after transit.
Safety Information
- Ensure all wiring is correctly connected to prevent damage to the unit or vehicle.
- Do not attempt to operate the unit in a way that distracts you from driving.
- Consult a professional for installation if you are unsure about any steps.
- Keep the unit away from water and excessive heat.
Product Overview
The LEHX Pro is an advanced 2-DIN Android 14 car multimedia player designed for Honda HR-V, HRV, XRV, and Vezel models from 2013 to 2019. It features a QLED 1280*720 touch screen, built-in GPS navigation, wireless CarPlay and Android Auto, Bluetooth 5.x, DSP for enhanced audio, and support for various multimedia formats.
Key Features:
- Operating System: Android 14
- Display: 9-inch QLED 1280*720 resolution, Touch Screen
- Processor: 4-Core or 8-Core 64BIT (depending on model variant)
- Memory (RAM/ROM): Various configurations (e.g., 1GB/32GB, 2GB/32GB, 4GB/64GB, 6GB/128GB)
- Connectivity: Wi-Fi (2.4G/5G), 4G LTE (for 8-Core models), Bluetooth 5.x
- Audio: Built-in HiFi DSP (Digital Sound Processor), Subwoofer output
- Navigation: Built-in GPS with offline map support (Navitel/Igo), Google Maps
- Special Features: Wireless CarPlay, Android Auto, Steering Wheel Control, Voice Control, Reversing Input, Split Screen, Mobile Phone Mirror Link (iPhone & Android), OBD2 support, TPMS support, USB ports (2 or 3 depending on model)
- Digital Media Formats: CD, DVD-R/RW, DVD-RAM, VIDEO CD, Mp3, MP4, WMA, JPEG
- Voltage: 12 V
- Output Power: 50x4
- Material: ABS+
- Certification: CE
Setup and Installation
Pre-Installation Check:
Before installing the product in your car, please perform a preliminary test. Due to potential impacts during long transit, the unit might be affected. Testing it beforehand ensures proper functionality.
Adapter Compatibility:
Ensure your car's original radio adapter is compatible. The product is shipped with a standard adapter (Figure 1). If your original car radio's rear interface matches Figure 2 (not suitable), please do not proceed with installation.

Rear Interface Description:
Familiarize yourself with the power plug and other rear connections.

Important Wiring Notes:
- When the yellow B+ wire and the red ACC wire both receive 12V positive power, the unit will turn on normally.
- The yellow B+ wire maintains power for memory function.
- Ensure speaker cables are not grounded, shared, or touching other wires to prevent sound distortion, no sound output, or overheating.
CANBUS Connection:
For high-end models, disconnect the original CANBUS and connect the new CANBUS. For low-end models, connect directly. If the CANBUS box and black buckle are connected simultaneously, it may prevent the radio from shutting down after the car is turned off.

Reversing Camera Installation:
This section details the wiring for the reversing camera. The camera is installed at the rear of the car.

Wiring Steps:
- Connect the yellow cable (1) to the navigation reversing video input socket.
- Connect the red cable (2) to the reverse detection line of the navigation adapter (BACK or REVERSE).
- Connect cables (3) and (4) together, then connect to the positive pole of the reverse light power supply.
- Connect the black cable (5) to the body screw (ground) or the negative pole of the reverse light power supply.
If the reversing camera is not installed, do not connect the REVERSE/BACK cable anywhere. Leave it unconnected. Otherwise, the unit may not display correctly or automatically enter reverse mode, potentially causing malfunction. If this occurs, disconnect the REVERSE/BACK line as soon as possible.

Operating Instructions
User Interface (UI) Display:
The newly released UI version of L6 Pro is designed for convenience and aesthetics, meeting daily driving needs.

Steering Wheel Control Learning:
To configure steering wheel controls:
- Press and hold a button on your car's original steering wheel.
- Find the corresponding button icon on the car radio's screen.
- Click the icon to change its color. Successful learning is indicated by the color change.

CarPlay and Android Auto:
The unit supports both wired and wireless CarPlay and Android Auto. For Android Auto, "Google Play" services must be available locally, and Android 6.0 or higher is required.
Wired Connection: Connect your device via USB cable to automatically enter the CarPlay/Android Auto interface.
Wireless Connection:
- Turn on Bluetooth and Wi-Fi on your mobile phone.
- Connect to the unit's Bluetooth.
- The unit will automatically enter the CarPlay/Android Auto interface.
Note: The signal is transmitted via Wi-Fi. If Bluetooth is off, transmission will still occur normally. If Wi-Fi is off, CarPlay/Android Auto will disconnect.
Video: Demonstration of CarPlay and Android Auto functionality, including navigation, music, and phone calls.
Bluetooth Functionality:
The LEHX L6 Pro supports BT5.1 for mobile phone pairing, music streaming, and hands-free calling, ensuring driving safety.

Voice Control:
The unit supports voice commands for various functions, such as navigation, radio, music, and Bluetooth. This allows for hands-free operation.

Split Screen Functionality:
The split-screen feature allows you to run two applications simultaneously, such as navigation and music, or DVR and music.

DSP (Digital Sound Processor):
The LEHX Pro features a 5.1 channel DSP with DTS HiFi digital audio authorization. It offers various sound modes like Surround Sound, Trubass, and Phantom Center for a rich audio experience. The DSP allows adjustment of surround sound, reduces noise, and maximizes sound conversion for high-quality music performances.

OBD2 Support:
The unit supports OBD2 functionality for engine management diagnostics and tools. It can display real-time information, fault codes, and other vehicle data.

TPMS (Tire Pressure Monitoring System) Support:
The intelligent four-tire pressure detector provides real-time temperature visualization. An alarm will activate immediately if tire pressure or temperature limits are exceeded.

Video Output:
4-core models support headrest connection video output. 8-core models do not support rear-view headrests directly but can with additional USB adapters. This feature allows passengers to enjoy visual content.

SIM Card Slot (L6 Pro):
The L6 Pro model supports the installation of two SIM cards: one integrated and one in an external cable.

Maintenance
- Keep the screen clean using a soft, dry cloth.
- Avoid exposing the unit to extreme temperatures or direct sunlight for prolonged periods.
- Ensure all connections are secure and free from corrosion.
Troubleshooting
1. Cannot Boot Normally:
- Wiring Check: Ensure the "Yellow" (B+), "Red" (ACC), and "Black" (Ground) wires are correctly connected. Yellow to positive, Red to key control, Black to negative. If only two wires are connected, it won't boot.
- Original Car Wiring: If the original car wiring color does not match the unit's standard, it might not boot or could burn out.
- Original Car Plug: The original car plug cannot be directly plugged into the new unit. Even if it fits, it may not work or could cause damage.
- Fuse Check: If the 3 wires are correctly connected but it doesn't boot, check the fuse on the yellow wire. If the fuse is fine, twist the yellow and red wires together, turn the key, and press the power button to test.
- Repeated Fuse Blowing: If the fuse blows repeatedly, stop changing it. This indicates a short circuit in the unit's protection circuit. The unit may require professional repair.
- Final Test: If all checks fail, connect the yellow and red wires to a 12V battery's positive terminal and the black wire to the negative terminal. Press the power button. If it boots, the issue is with the car's wiring. If not, the unit is faulty.
2. Automatic Shut-down:
- Cable Error: If the blue automatic antenna power supply cable is connected to the unit's power cable, it will automatically shut down. Correct the wiring.
- Unstable Voltage: Test the power supply with a stable 12V-5A source. If it still shuts down automatically, replace the power supply. If not, the unit is faulty.
3. Noise Issues:
- Speaker Power: If the original speaker power is too low, increasing the unit's volume may cause noise. Avoid excessively high volume.
- Grounded Speaker Cable: If the speaker cable is grounded, connect the iron speaker cable directly to the unit's speaker cable.
4. Remote Control Not Working:
- Test Method: Use a mobile phone camera to check the remote control's infrared light. Point the remote at the camera and press a button. If the light flashes, the remote is working, and the issue might be with the unit. If no light, replace the battery.
5. Settings Not Saved (No Memory):
- Ensure the yellow and red wires are connected together (yellow to positive, red to key control).
- If yellow and red wires are reversed, simply swap their positions.
6. Bluetooth Not Functioning:
- Turn on the unit, search for its Bluetooth name on your mobile phone, and connect. After connecting, you should be able to make calls and play music.
7. Product Emits Smoke:
- Replace the FUSE. If the problem persists, the internal circuit is likely burned. After-sales service is required.
8. Sound Cannot Be Adjusted:
- Reset the unit or unplug and replug the power cord.
- If the volume knob is broken, it needs to be replaced.
9. Reversing Camera Not Displaying:
- Wrong or Missing Wiring: Refer to the "Reversing Camera Installation" section for correct wiring.
- Faulty Camera: If the camera's light does not illuminate when correctly wired, the camera is faulty and needs replacement.
10. USB Devices Not Playing:
- Format the USB flash drive to FAT32. Re-download one or two songs and try again. If it still doesn't work, replace the USB flash drive.
11. FM Not Receiving Radio Stations:
- Antenna Connection: Ensure the antenna plug is fully inserted. Check if the antenna is disconnected or the line is broken.
- Station Search: Use the "AS" button for automatic search or the "before/after" buttons for manual tuning.
- Antenna Replacement: If the above steps don't work, unplug the antenna plug and insert a screwdriver or metal strip in its place to test.
12. No Sound Immediately After Installation:
- This usually indicates a wiring error or a short-circuited original car speaker wire.
- Check if the speaker cable is short-circuited and connected. Reconnect if necessary.
- Verify the number of speaker cables. If only 2 speaker cables are present, and your original car line requires 4, you need to re-route the original car line. One speaker requires 2 cables; two speakers require 4 cables.
13. No Sound After a While:
- Disconnect all speaker cables from the unit (do not remove them). Connect an external speaker to the gray and purple wires of the tail line. Test any group with green. If there is sound, the car's speaker line is short-circuited or the speaker is damaged. If there is no sound, the unit is broken.
Specifications
| Feature | Specification |
|---|---|
| Operating System | Android |
| RAM | 6G |
| ROM | 128G |
| Display Size | 9" |
| Resolution | QLED 1280*720 |
| Is touch screen | Yes |
| Built-in Screen | Yes |
| Din | Double Din |
| Out Power | 50x4 |
| Voltage | 12 V |
| Item Weight | 1.5 kg |
| Max External Memory | 128G |
| TF/Micro SD Slot | 0 |
| Interface | For Honda Hr-V Hrv, 2*USB RCA Bluetooth |
| Special Features | WiFi function, Support steering wheel control, Support 4G Network, Built-in GPS, Mobile Phone, MP3 players, Voice Control, dsp, CarPlay, android auto, Reversing Input, Split Screen |
| Digital Media Format | CD, DVD-R/RW, DVD-RAM, VIDEO CD, Mp3, MP4, WMA, JPEG |
| OSD Language | Chinese (Simplified), Chinese (Traditional), Albanian, Arabic, Azeri, Irish, Estonian, Belarusian, Bulgarian, Icelandic, Polish, Persian, Boolean text (Dutch South Africa), Danish, German, Russian, French, Filipino, Finnish, Georgian, Haitian Creole, Korean, Dutch, Galicia, Catalan, Czech, Croatian, Latin, Latvian, Lithuanian, Romanian, Maltese, Malay, Macedonian, Norwegian, Portuguese, Japanese, Swedish, Serbian, Slovak, Slovenian, Swahili, THAI, Turkish, Welsh, Ukrainian, Hebrew, Greek, Spain's Basque, Spanish, Hungarian, Armenian, Italian, Yiddish, Hindi, Urdu India, Indonesia, English, Vietnamese (Full list) |
| Brand Name | LEHX |
| Origin | Mainland China |
| For Vehicle Brands/Model | Honda HR-V HRV XRV Veze (2013-2019) |
| Certification | CE |
| Material | ABS+ |
| Subwoofer Output | Support |
| AV-OUT | WiFi version support, 4G version not support |
| RCA cable | 7 channels including subwoofer cable |
| Screen Display | 2.5D 9inch QLED 1280*720 resolution |
| Mirror Link | Iphone & Android |
| Microphone | Built-in (external microphone optional) |
| GPS Navigation Map | Built-in offline map free update (support navitel/Igo) |
| Bluetooth Phone Book | Support |
| Bluetooth Music | Support |
| OS Language | Support 46 countries, Russian, Spanish, Portuguese, French, Hebrew, etc. |
| System | Android |
| Carplay | Support |
| Android Auto | Support |
User Tips
- Performance Over Time: Some users inquire about long-term performance. Regular software updates and ensuring proper ventilation can help maintain optimal performance.
- Installation Assistance: If you are unsure about the installation process, especially regarding wiring or CANBUS connections, it is highly recommended to consult a professional installer to avoid potential damage to the unit or your vehicle.
- Voice Activation: If you encounter issues with voice activation, ensure the microphone is properly connected and configured. Refer to the Q&A section for specific activation and troubleshooting steps for "Toppal Voice" if applicable.
- Troubleshooting Resources: For common issues, always refer to the troubleshooting section first. If the problem persists, contact customer service for further assistance.
Warranty and Support
The product comes with a 1-year warranty. For any issues or technical assistance, please contact customer service. It is recommended to have professional installation to avoid voiding the warranty due to improper setup.
Contact Information:
If you need more help, please contact our customer service. You can find contact details via the QR codes provided in the product packaging or on the seller's official store page.

PDF User Manual: A detailed user manual in PDF format is available for download. View User Manual (PDF)