SUNBUCK AV-298BT

Contents

SUNBUCK AV-298BT Home Theater Power Amplifier

User Instruction Manual

Model: AV-298BT | Brand: SUNBUCK

1. Introduction

Thank you for choosing the SUNBUCK AV-298BT Home Theater Power Amplifier. This amplifier is designed to provide high-fidelity audio for your home entertainment system, featuring 5 channels, Bluetooth connectivity, FM radio, SD card, and USB playback, along with two microphone inputs for karaoke. Please read this manual carefully before operating the device to ensure proper use and to maximize its performance and lifespan.

Front and rear view of the SUNBUCK AV-298BT amplifier

Figure 1: SUNBUCK AV-298BT Amplifier (Front and Rear View)

2. Important Safety Instructions

  • Voltage Warning: The US Plug version of this amplifier is 110V, and the EU Plug version is 220V. Ensure you select and use the appropriate specification for your country's voltage to prevent damage to the amplifier. Connecting the wrong voltage can cause severe damage and fire hazards.
  • Do not open the amplifier casing. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.
  • Keep the amplifier away from water, moisture, and excessive heat.
  • Ensure proper ventilation around the unit. Do not block ventilation openings.
  • Use only attachments/accessories specified by the manufacturer.
  • Unplug the apparatus during lightning storms or when unused for long periods.
  • Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

3. Package Contents

Please check the box for the following items:

  • 1 x SUNBUCK AV-298BT Power Amplifier
  • 1 x Remote Control
  • 1 x English User Manual

4. Product Overview

Familiarize yourself with the controls and connections of your AV-298BT amplifier using the diagrams below.

Front and rear panel indicator diagram with numbered labels

Figure 2: Front and Rear Panel Controls and Ports

4.1 Front Panel Controls

  1. Power ON / OFF: Main power switch for the amplifier.
  2. Microphone Volume -/+: Adjusts the volume level of the connected microphones.
  3. Mic 1 / 2: 6.3mm jack inputs for microphones.
  4. Echo: Adjusts the echo effect for microphone inputs.
  5. BASS: Adjusts the low-frequency (bass) output.
  6. Treble: Adjusts the high-frequency (treble) output.
  7. Loud -/+: Activates or adjusts the loudness enhancement feature.
  8. Master Vol: Main volume control for all audio output.
  9. Exchange Input: Input source selector (e.g., Bluetooth, USB, SD, DVD, CD, Line).
  10. SD Card Slot: Insert SD cards for digital audio playback.
  11. Display: Shows current mode, track information, FM frequency, etc.
  12. USB Disk Port: Insert USB drives for digital audio playback.
  13. Prev / Play.Pause / Next / Mode: Controls for media playback and input mode selection.

4.2 Rear Panel Connections

  1. CD Input / DVD Input: RCA stereo audio inputs for CD and DVD players.
  2. Output: RCA stereo audio output (Line Out) for connecting to other audio devices.
  3. Main Channel 1 / 2 Speaker Outputs: Screw-type terminals for connecting main left and right speakers (4-16 ohms).
  4. Surround / Mid / Surround Speaker Outputs: Additional screw-type terminals for connecting surround or center speakers (4-16 ohms).
  5. Power Supply: AC power input (110V or 220V depending on model).

5. Setup Instructions

Follow these steps to connect your amplifier to your audio system.

Connection diagram showing various audio inputs, speaker outputs, microphone inputs, and USB/SD card slot

Figure 3: Amplifier Connection Diagram

5.1 Power Connection

  • Ensure the amplifier's power switch is in the OFF position.
  • Verify that the amplifier's voltage (110V for US Plug, 220V for EU Plug) matches your local power supply.
  • Connect the power cord to the amplifier's power supply input (18) and then to a suitable wall outlet.

5.2 Speaker Connection

  • Connect your passive speakers to the amplifier's speaker output terminals (16, 17).
  • Ensure correct polarity: connect the positive (+) terminal of the amplifier to the positive (+) terminal of the speaker, and the negative (-) terminal of the amplifier to the negative (-) terminal of the speaker.
  • The amplifier supports speakers with a load impedance of 4 to 8 ohms.

5.3 Audio Source Connection

  • CD/DVD Players: Connect the RCA audio output from your CD or DVD player to the corresponding CD Input / DVD Input (14) on the amplifier's rear panel.
  • Other Line-Level Devices: Use the Line Input (part of 14, often labeled 'AUX' or 'LINE') for connecting other audio sources like media players or TVs.

5.4 Microphone Connection

  • Plug your microphones into the Mic 1 / 2 inputs (3) on the front panel.
  • This amplifier supports two microphone inputs simultaneously for karaoke.
Image highlighting the two microphone inputs and karaoke features

Figure 4: Dual Microphone Inputs for Karaoke

6. Operating Instructions

6.1 Powering On/Off

  • Press the Power ON / OFF button (1) on the front panel to turn the amplifier on or off.

6.2 Input Source Selection

  • Use the Exchange Input knob (9) or the 'Mode' button (13) on the front panel/remote control to cycle through available input sources: CD, DVD, Line, Bluetooth, USB, SD, FM.

6.3 Volume and Tone Control

  • Master Volume: Adjust the Master Vol knob (8) to control the overall output volume.
  • Microphone Volume: Use the Microphone Volume -/+ knob (2) to adjust microphone levels independently.
  • Bass/Treble: Adjust the BASS (5) and Treble (6) knobs to fine-tune the audio's low and high frequencies.
  • Echo: The Echo knob (4) controls the reverb effect for microphone inputs.
  • Loudness: Use the Loud -/+ button (7) to engage or adjust the loudness compensation for enhanced bass and treble at low volumes.

6.4 Bluetooth Operation

  • Select 'Bluetooth' as the input source using the Exchange Input knob (9) or 'Mode' button (13). The display (11) will show 'BLUE' or a similar indicator.
  • On your mobile device, search for Bluetooth devices and select 'AV-298BT' to pair.
  • Once paired, you can stream audio wirelessly from your device to the amplifier.

6.5 FM Radio Operation

  • Select 'FM' as the input source.
  • The amplifier features an automatic search function for FM stations within the 87.5MHz-108MHz range.
  • Use the 'Prev' and 'Next' buttons (13) to navigate between stations.
Diagram illustrating the FM radio frequency range and antenna connection

Figure 5: FM Radio Functionality

6.6 USB/SD Card Playback

  • Insert a USB disk into the USB Disk Port (12) or an SD card into the SD Card Slot (10).
  • The amplifier will automatically switch to USB/SD mode or you may need to select it using the 'Mode' button (13).
  • Use the 'Prev', 'Play.Pause', and 'Next' buttons (13) to control playback.

7. Specifications

Technical specifications for the SUNBUCK AV-298BT amplifier:

Feature Specification
Model Number AV-298BT
Channels 5
Power Input 110V/220V 50Hz (US Plug: 110V, EU Plug: 220V)
Maximum Power Per Channel 90 W
Frequency Response 20Hz-20KHz (+/-10dB)
Input Sensitivity 150mV
Tone Control (Treble) 10dB at 10KHz
Tone Control (Mid) 8dB at 1kHz
Tone Control (Bass) 10dB at 100Hz
Surround Effect Control 0-10dB
Signal to Noise Ratio ≥ 80dB
Loudness +6dB at 100Hz / +6dB at 10KHz
Load Impedance 4 to 8 ohms
Color Options Golden/Black
Dimensions (L x W x H) 14 x 11 x 3.54 inches (approx.)

8. Troubleshooting

If you encounter issues with your amplifier, refer to the following common problems and solutions:

  • No Power:
    • Check if the power cord is securely connected to both the amplifier and the wall outlet.
    • Ensure the power switch is in the 'ON' position.
    • Verify the wall outlet is functioning by plugging in another device.
  • No Sound Output:
    • Check all audio cable connections between the source device and the amplifier.
    • Ensure speakers are correctly connected to the amplifier's output terminals with correct polarity.
    • Verify the correct input source is selected on the amplifier.
    • Increase the Master Volume and check individual source device volumes.
    • Ensure no headphones are connected (if applicable).
  • Distorted Sound:
    • Reduce the Master Volume to prevent clipping.
    • Check if the audio source is sending a clean signal.
    • Ensure speaker impedance matches the amplifier's requirements (4-8 ohms).
    • Adjust Bass and Treble controls to a neutral position.
  • Bluetooth Pairing Issues:
    • Ensure the amplifier is in Bluetooth mode.
    • Make sure your device's Bluetooth is enabled and within range.
    • Forget the device from your phone's Bluetooth list and try pairing again.
    • Restart both the amplifier and your Bluetooth device.
  • Microphone Not Working:
    • Ensure microphones are securely plugged into Mic 1 / 2 inputs.
    • Increase the Microphone Volume knob.
    • Check if the microphones are switched on (if they have an on/off switch).

9. User Tips

  • Ventilation: Always ensure adequate airflow around the amplifier to prevent overheating. Avoid placing it in enclosed spaces or on soft surfaces that might block vents.
  • Cable Management: Organize your cables neatly to prevent interference and accidental disconnections. Use cable ties if necessary.
  • Remote Control: Keep the remote control in a safe place and replace batteries regularly for uninterrupted operation.

10. Maintenance

  • Cleaning: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the exterior of the amplifier. Do not use liquid cleaners or abrasive materials.
  • Storage: If storing the amplifier for an extended period, unplug it from the power outlet and store it in a cool, dry place, away from direct sunlight and extreme temperatures.

11. Warranty and Support

For any issues not covered in this manual or for technical support, please contact your retailer or the manufacturer's customer service. Keep your purchase receipt as proof of purchase for warranty claims.

© 2023 SUNBUCK. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.