PHYEE 16P2MIT20P-WC

Contents

PHYEE 20Pin/20Pin Wiring Harness CAN Bus Decoder Instruction Manual

Model: 16P2MIT20P-WC

1. Product Overview

This PHYEE 20Pin/20Pin Wiring Harness with CAN Bus Decoder is designed to facilitate the installation of an Android car radio with a 16-pin socket into specific Mitsubishi Pajero models. It ensures Steering Wheel Control (SWC) retention and provides a plug-and-play solution for seamless integration.

Main product image: Wiring harness with CAN Bus decoder
Figure 1: PHYEE 20Pin/20Pin Wiring Harness with CAN Bus Decoder

Important Note: This wiring harness is specifically designed for Mitsubishi Pajero models from 2011 to 2013 that come with an original amplifier and a 20-pin connector cable. Please verify your vehicle's specifications before installation.

2. Package Contents

  • 1 x 16-pin to 20-pin Harness Adapter
  • 1 x CAN Bus Decoder

3. Installation Guide

3.1. Pre-Installation Check

  1. Ensure your vehicle is a Mitsubishi Pajero (2011-2013) with an original amplifier.
  2. Verify that your factory original radio has the required 20-pin connectors. Refer to Figure 2.
  3. Confirm your new Android radio has a 16-pin socket.
Rear view of factory original radio showing 20-pin connectors (A and B)
Figure 2: Factory original radio with 20-pin connectors (A and B)

3.2. Connecting the Harness and CAN Bus Decoder

  1. Locate the 20-pin connectors on your vehicle's factory wiring.
  2. Connect the 20-pin harness adapter to the corresponding connectors in your vehicle.
  3. Connect the 16-pin plug of the harness to the 16-pin socket on your Android radio. Refer to Figure 3 for visual identification of the CAN Bus decoder and 16-pin connector.
  4. Integrate the CAN Bus decoder into the wiring as shown in Figure 3.
  5. Ensure all connections are secure and properly seated.
CAN Bus decoder and 16-pin connector for Android radio
Figure 3: CAN Bus decoder and 16-pin Android radio connector
Wiring harness connected to an Android radio
Figure 4: Example of wiring harness connected to an Android radio

3.3. Visual Installation Guide

Watch this video for a step-by-step visual guide on connecting the wiring harness and CAN Bus decoder.

Video 1: Product demonstration and connection overview

4. Operating Instructions

4.1. CAN Bus Setting Operation

After physical installation, you may need to configure the CAN Bus settings within your Android system to ensure proper communication and functionality, especially for Steering Wheel Controls (SWC).

  1. Enter the Android system's factory settings menu.
  2. Select the 'CAN Bus decoder type' option.
  3. Choose the car brand (e.g., Mitsubishi).
  4. Select the specific car model and year (e.g., Pajero 2011-2013).
CAN Bus setting operation steps on an Android system
Figure 5: CAN Bus setting operation steps

4.2. Steering Wheel Control (SWC) Retention

The CAN Bus decoder is designed to retain your vehicle's original steering wheel control functions, allowing you to operate your Android radio safely and conveniently without taking your hands off the wheel. Ensure the CAN Bus settings are correctly configured as described above for optimal performance.

5. Maintenance

To ensure the longevity and proper functioning of your wiring harness and CAN Bus decoder, follow these general maintenance guidelines:

  • Keep the connections dry and free from moisture.
  • Avoid exposing the components to extreme temperatures.
  • Periodically inspect the connections for any signs of wear, corrosion, or looseness.
  • Do not attempt to modify the wiring harness or CAN Bus decoder, as this may void the warranty and cause damage.

6. Troubleshooting

6.1. No Power to Android Radio

  • Check all power connections from the harness to the radio and the vehicle's power source.
  • Ensure the vehicle's ignition is on.
  • Verify the fuse for the radio circuit is intact.

6.2. No Sound from Speakers

  • Confirm all speaker wires are correctly connected to the Android radio and the vehicle's speaker system.
  • Ensure the original amplifier is functioning correctly, as this harness is designed for vehicles with an original amplifier.
  • Check the audio settings on your Android radio.

6.3. Steering Wheel Controls Not Working

  • Re-check the CAN Bus settings in your Android system as described in Section 4.1.
  • Ensure the CAN Bus decoder is properly connected.
  • Some Android radios may require manual mapping of SWC buttons after CAN Bus configuration. Refer to your Android radio's manual.

6.4. General Connection Issues

  • Double-check all plugs and connectors for secure and correct insertion.
  • If issues persist, consult a professional car audio installer.

7. Specifications

FeatureSpecification
Item TypeCables, Adapters & Sockets
Brand NamePHYEE
Model Name16P2MIT20P-WC
Voltage12 V
Item Weight0.12 kg
Item Size20 Pin Harness Adapter
MaterialCopper
16 Pin PlugYes
Dual 20 Pin ConnectorYes
Suitable forCar Android with 16 Pin Socket
CAN Bus DecoderYes
Suitable CarMitsubishi Pajero 2011-2013
OriginMainland China

8. Warranty and Support

This product comes with a 1-year warranty from the date of purchase, covering manufacturing defects. For technical support or warranty claims, please contact the seller directly.

9. User Tips

  • Compatibility Check: Always double-check the compatibility of the wiring harness with your specific car model and year, especially regarding the original amplifier and connector type, to avoid purchasing errors.
  • Professional Installation: If you are unsure about any step of the installation process, it is highly recommended to seek assistance from a qualified car audio technician to prevent damage to your vehicle or the product.
  • CAN Bus Configuration: Ensure the CAN Bus settings in your Android head unit are correctly configured for your vehicle's make and model to enable all features, particularly steering wheel controls.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.