1. Product Overview
The XHORSE XKGHG3EN Masker Style 4 Buttons Garage Remote is a second-generation universal remote key designed for various applications, including garage door control and vehicle remote functions. It features an all-new V2 design with enhanced capabilities.
Key Features:
- All-new V2 Design
- Supports Wireless Programming
- Lower Power Consumption
- Enhanced Anti-static Protection
- Supports auto frequency adaptation
- Supports ASK & FSK copying, including non-standard codes

2. Package Contents
Upon receiving your XHORSE XKGHG3EN remote key, please verify that all components are present:
- Remote Key Shell
- Circuit Board
- Battery (CR2032 - not included)
- Key Blade (not included)

3. Setup and Assembly
3.1 Unpacking and Initial Assembly
The remote key comes disassembled to allow for battery insertion and key blade installation. Follow these steps for initial assembly:
- Carefully remove the remote key shell and circuit board from their packaging.
- Insert a CR2032 battery into the battery socket on the circuit board.
- Align the circuit board within one half of the remote key shell.
- If using a key blade, insert it into the designated slot in the shell.
- Carefully snap the two halves of the remote key shell together until they are securely closed.
3.2 Programming the Remote Key
The XHORSE XKGHG3EN supports both wireless and wired programming methods using compatible devices like the VVDI Key Tool. The internal chip design may vary across different remote key types, influencing the connection method.
Wireless Programming:
- Place the remote key into the designated slot on your VVDI Key Tool.
- Follow the instructions on the VVDI Key Tool's display or its connected mobile application to initiate the 'Remote Program' or 'Generating remote' process.
- The tool will detect the remote and begin generating the necessary codes.
Wired Programming:
- Connect the remote key's circuit board to the VVDI Key Tool using the appropriate wired adapter.
- Follow the instructions on the VVDI Key Tool's display or its connected mobile application for wired programming.
- Ensure a stable connection throughout the programming process.
4. Operating the Remote Key
Once programmed, the XHORSE XKGHG3EN remote key functions like a standard remote for your garage or vehicle. It typically features four buttons for common actions:
- Lock Button: To lock your vehicle or garage door.
- Unlock Button: To unlock your vehicle or garage door.
- Trunk/Auxiliary Button: For opening the trunk or other programmable auxiliary functions.
- Panic/Auxiliary Button: For activating a panic alarm or another programmable auxiliary function.

5. Maintenance
5.1 Battery Replacement
The remote key uses a CR2032 coin cell battery. When the remote's range decreases or it stops responding, it's likely time to replace the battery.
- Disassembly: Refer to Video 2 for detailed instructions on how to safely disassemble the remote key. You may need a small tool (like a flathead screwdriver or a specialized key tool) to pry open the casing.
- Remove Old Battery: Once the casing is open, carefully remove the old CR2032 battery from its socket on the circuit board.
- Insert New Battery: Place a new CR2032 battery into the socket, ensuring correct polarity (+ side up).
- Reassembly: Carefully snap the remote key casing back together, ensuring all parts are aligned and secure.

5.2 Cleaning and Storage
- Clean the remote key with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
- Store the remote key in a dry place, away from extreme temperatures and direct sunlight.
- Avoid dropping the remote key or exposing it to water, as this can damage internal components.
6. Troubleshooting
If you encounter issues with your XHORSE XKGHG3EN remote key, try the following troubleshooting steps:
- Remote Not Responding: Check the battery. Replace it if it's low or dead (refer to Section 5.1).
- Reduced Range: A weak battery is a common cause for reduced range. Replace the battery. Ensure there are no obstructions between the remote and the receiver.
- Remote Not Programming: Double-check that you are using a compatible VVDI Key Tool and following the programming instructions precisely. Ensure the remote is correctly placed for wireless programming or securely connected for wired programming.
- Buttons Not Working: Ensure the remote is fully assembled and the circuit board is correctly seated. If only specific buttons are not working, there might be an issue with the button contacts or the circuit board itself.
If problems persist after attempting these steps, please contact Xhorse customer support for further assistance.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | Xhorse |
| Model | XKGHG3EN |
| Transponder | NO |
| Product Size | 2.71 x 1.57 x 0.58 inches (approx. 6.88 x 3.99 x 1.47 cm) |
| Product Weight | 32g |
| Battery Model | CR2032 (Not included) |
| Origin | Mainland China |
| Certification | NONE |
| Quality | Excellent |
| Condition | New |

8. Warranty and Support
For warranty information, technical support, or service inquiries regarding your XHORSE XKGHG3EN Masker Garage Remote Key, please contact Xhorse Direct Store or your authorized Xhorse dealer. Ensure you have your product model number (XKGHG3EN) available when seeking support.