Introduction
Thank you for choosing the FEICHONGHO Automatic Watch Winder. This device is designed to keep your automatic watches wound and ready to wear, simulating natural human movement to maintain their accuracy and longevity. It supports both single and dual watch winding modes and is compatible with a wide range of automatic watches.
Important Safety Information
- Keep the device away from water or other liquids.
- Do not expose the device to extreme temperatures or direct sunlight.
- Avoid dropping or subjecting the device to strong impacts.
- Use only the specified power input (≤ DC 5V/2A).
- Keep out of reach of children and pets.
- Do not attempt to disassemble or repair the device yourself. Contact customer support if issues arise.
Package Contents
Please check the package for the following items:
- Automatic Watch Winder Unit
- USB Power Cable (for DC 5V/2A input)
- User Manual (this document)
Setup
- Unpack the Device: Carefully remove the watch winder and all accessories from its packaging.
- Place the Winder: Place the watch winder on a stable, flat surface away from direct sunlight, moisture, and strong magnetic fields.
- Connect Power: Connect the provided USB power cable to the power input port on the back of the watch winder. Plug the other end into a compatible DC 5V/2A power source, such as a mobile phone adapter or a computer USB port.
- Insert Watch(es):
Figure 1: Watch holders supporting single or dual watch mode, suitable for various watch sizes. - For Single Watch Mode: If you are winding a single watch, ensure only one watch holder is attached to the rotating mechanism. Gently place your automatic watch onto the watch holder, ensuring it is securely fastened. The watch holder is designed to accommodate watches of various sizes, for both men and women.
- For Dual Watch Mode: If you are winding two watches, ensure both watch holders are attached. Gently place each automatic watch onto its respective watch holder, ensuring they are securely fastened.
Figure 2: Removing a watch holder to switch to single watch mode.
Operating Instructions
Once the watch(es) are securely placed and the power is connected, the watch winder will automatically begin its operation. The device simulates human wrist movement to keep your automatic watches wound.
- Automatic Operation: The winder operates continuously when powered, providing consistent winding for your automatic watches.
- Single Watch Mode: When only one watch holder is in place, the winder will rotate the single watch.
- Dual Watch Mode: When both watch holders are in place, the winder will rotate both watches simultaneously.
Figure 3: Watch winder operating with two watches.
Maintenance
- Cleaning: Wipe the exterior of the watch winder with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Dust Protection: Keep the device covered when not in use for extended periods to prevent dust accumulation.
- Watch Holders: Ensure the watch holders are clean and free of debris to prevent scratching your watches.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Winder is not operating. | No power or loose connection. | Check if the USB power cable is securely connected to both the winder and the power source. Ensure the power source is active. |
| Watch is not winding properly. | Watch not securely placed on holder. | Ensure the watch is firmly and correctly seated on the watch holder. |
| Device makes a faint sound. | Normal operation sound. | This is normal. The device is designed to be quiet, but a faint sound may be audible up close. It is hard to hear this sound from one meter away. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | Automatic Watch Winder |
| Brand | FEICHONGHO |
| Material | Plastics |
| Input Power | ≤ DC 5V/2A |
| Watch Capacity | Supports single or two watches |
| Weight | 350 grams |
| Magnetism | Weak (approx. 2.8Gs), designed to prevent watch magnetization. Distance from magnet to watch holder > 65mm.
|
| Working Principle | Electromagnetic drive, simulating human movement. |
User Tips
- For optimal performance, ensure your watch is fully wound before placing it on the winder, especially if it has been stopped for a long time.
- The winder is designed to be quiet, but placing it on a soft, absorbent surface can further minimize any faint operational sounds.
- Regularly check that watches are securely seated to prevent accidental dislodgement during rotation.
Warranty and Support
For any questions, technical support, or warranty claims, please contact the seller or manufacturer directly. Please retain your proof of purchase for warranty purposes.
