1. Introduction
The MicMol THOR Series T-60 is a smart-controlled 60W LED lighting system designed for saltwater marine and reef aquariums. This manual provides detailed instructions for the safe and efficient setup, operation, and maintenance of your new aquarium light. Featuring advanced control options and a powerful LED array, the THOR T-60 ensures optimal lighting conditions for your aquatic environment.
Figure 1: MicMol THOR T-60 LED Light with adjustable arm.
2. Safety Information
Please read and understand all safety instructions before operating the MicMol THOR T-60 LED light. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always disconnect the power supply before performing any maintenance or installation.
- Do not immerse the light fixture or power adapter in water.
- Ensure your hands are dry when handling electrical components.
- Keep the light away from flammable materials.
- This product is designed for indoor use only, specifically for aquariums.
- Do not operate the light if any part is damaged. Contact support for assistance.
- Ensure proper ventilation around the light fixture to prevent overheating.
3. Package Contents
Verify that all items listed below are included in your package:
- MicMol THOR T-60 LED Light
- Pro stand bracket (Clip-On fixture)
- Smart controller (iMOS 4.0)
- Connect cable
- Standard power cord
- Power adapter (DC24V, 2~5A)
- Tool sets
- Instruction Manual (this document)
4. Product Overview
The MicMol THOR T-60 is a high-performance LED light for marine and reef aquariums, offering smart control and a customizable spectrum. It features a compact design and an advanced iMOS 4.0 Smart Controller for comprehensive lighting management.
4.1 Key Features
- 60W power output with CREE XP-E LEDs.
- iMOS 4.0 Smart Controller with Bluetooth (2.4G) and Broadcast (2.4G) for multi-device control.
- 4 independent lighting channels and 6 time points for diversified settings.
- HD OLED display on the controller for clear readability.
- Simulates natural lighting effects: Lunar, lightning, cloudy.
- Expandable plugs for integrating other devices like pumps and fans.
- Adjustable Clip-On pro stand bracket for flexible mounting.
4.2 Components
Figure 2: iMOS 4.0 Smart Controller. Features include DC Output, Touch Button, Indicator, and DC Input.
Figure 3: Bottom view of the THOR T-60 LED light, showcasing the LED array.
5. Setup Instructions
Follow these steps to properly set up your MicMol THOR T-60 LED light.
5.1 Mounting the Light
- Attach the pro stand bracket to the light fixture using the provided tool sets.
- Secure the Clip-On bracket to the edge of your aquarium. Ensure it is firmly attached and stable.
- Adjust the arm of the light fixture to the desired height and angle over your aquarium. The fixture offers various gear angles for optimal positioning.
Figure 4: THOR T-60 LED light mounted on an aquarium using the Clip-On bracket.
Figure 5: Various mounting configurations and dimensions for the THOR T-60 light fixture.
5.2 Electrical Connection
- Connect the light fixture to the smart controller using the provided connect cable.
- Connect the power adapter to the smart controller's DC Input.
- Plug the standard power cord into a suitable electrical outlet.
- Ensure all connections are secure before powering on the device.
6. Operating Instructions
The MicMol THOR T-60 is controlled via the iMOS 4.0 Smart Controller and its dedicated mobile application.
6.1 App Connection and Initial Setup
- Download the MicMol iMOS 4.0 app from your device's app store.
- Ensure Bluetooth is enabled on your mobile device.
- Open the app and follow the on-screen instructions to pair with your smart controller. The controller uses both Bluetooth (2.4G) and Broadcast (2.4G) for easy and fast connection.
- Once connected, the app dashboard will display the status of your device.
Figure 6: MicMol iMOS 4.0 App interface, displaying dashboard, control, and settings screens.
6.2 Lighting Modes and Settings
The app offers various control options:
- Dashboard: Quickly access presets, switch ON/OFF lighting intensity, effects, and expander devices.
- Auto Mode: Program automated lighting cycles with 4 channels and 6 time points for customized light intensity and duration throughout the day.
- Manual Mode: Manually adjust the intensity of each of the 4 channels in real-time.
- Effects: Simulate natural phenomena such as Lunar cycles, lightning storms, and cloudy days to enhance the aquarium environment.
Figure 7: Example LED spectrum and PAR distribution for a Marine setup, showing channel distribution.
Figure 8: Example PAR distribution for a Blue setup, indicating light intensity over a 12x12 inch area at 10 inches height.
6.3 Expands Settings
The smart controller includes expander plugs that allow you to connect and control additional devices such as pumps or fans, helping you build a comprehensive tank system through a single interface.
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your MicMol THOR T-60 LED light.
- Cleaning: Periodically wipe the light fixture and lens with a soft, damp cloth to remove salt creep, dust, and water spots. Ensure the light is unplugged before cleaning. Do not use abrasive cleaners.
- Ventilation: Ensure the ventilation slots on the fixture are clear of obstructions to allow for proper heat dissipation.
- Cable Inspection: Regularly check the power cord and connect cables for any signs of wear or damage. Replace immediately if damage is found.
8. Troubleshooting
If you encounter issues with your MicMol THOR T-60, refer to the following common troubleshooting steps:
- Light not turning on:
- Check if the power adapter is securely plugged into both the controller and the electrical outlet.
- Ensure the connect cable between the light and controller is properly seated.
- Verify the electrical outlet is functioning by plugging in another device.
- App not connecting to controller:
- Ensure Bluetooth is enabled on your mobile device.
- Make sure the controller is powered on and within range of your mobile device.
- Restart the app and try connecting again.
- If issues persist, try restarting the controller by unplugging and replugging the power.
- Inconsistent light output or flickering:
- Check all cable connections for looseness.
- Ensure the light fixture has adequate ventilation and is not overheating.
- If using automated programs, verify the settings in the app.
If these steps do not resolve the issue, please contact MicMol customer support for further assistance.
9. Specifications
Detailed specifications for the MicMol THOR T-60 LED light:
| Feature | Detail |
|---|---|
| Power (W) | 60 W (21*3 W) |
| LEDs | CREE XP-E |
| Weight | 1.5 kg |
| Dimensions | 105*105*28 mm |
| Coverage | 20~60 cm |
| Cable Plug | Standard 5 Pin Waterproof Plug |
| Voltage | DC24V, 2~5A |
| Control | Smart Controller (iMOS 4.0) |
| Fixture Type | Clip-On |
| Origin | Mainland China |
| High-concerned chemical | None |
| Battery Included | No |
9.1 LED Array Configuration
The THOR T-60 offers different LED configurations optimized for various aquarium types:
Figure 9: Detailed LED array configurations for Marine, Blue, and Planted aquarium setups.
- Marine: 7x White (CH-A), 7x Royal Blue (CH-B), 3x Deep Blue (CH-C), 1x Deep Red (CH-D), 1x Green (CH-D), 2x UV (CH-D)
- Blue: 3x White (CH-A), 7x Royal Blue (CH-B), 7x Deep Blue (CH-C), 1x Deep Red (CH-D), 1x Green (CH-D), 2x UV (CH-D)
- Planted: 3x White (CH-A), 4x Blue (CH-B), 7x Green (CH-C), 7x Red (CH-D)
10. User Tips
Here are some tips to enhance your experience with the MicMol THOR T-60 LED light:
- Experiment with Settings: Utilize the 4 channels and 6 time points in Auto Mode to create a dynamic lighting schedule that best suits your specific corals and fish.
- Monitor Coral Response: Observe your corals' growth and coloration to fine-tune light intensity and spectrum. Adjust gradually to avoid shocking sensitive inhabitants.
- Utilize Expander Plugs: If you have compatible pumps or fans, connect them to the controller's expander plugs for centralized management through the app.
- Regular App Updates: Keep your iMOS 4.0 app updated to ensure access to the latest features and performance improvements.
11. Warranty and Support
MicMol products are manufactured to the highest quality standards. For warranty information, technical support, or service inquiries, please refer to the official MicMol website or contact your authorized dealer. Keep your purchase receipt as proof of purchase.
For more information, please visit www.micmol.com.
12. Product Video
Watch this video for a visual overview of the MicMol THOR T-60 LED light and its features.
Video 1: MicMol THOR T-60 Product Demonstration.
