STARESSO Mirage SP300 Plus

Contents

STARESSO Mirage SP300 Plus Portable Espresso Maker

User Instruction Manual

Introduction

Welcome to the world of portable espresso with the STARESSO Mirage SP300 Plus. This manual provides detailed instructions for setting up, operating, and maintaining your new espresso maker, ensuring you can enjoy rich, creamy espresso wherever you go. The SP300 Plus features a new single spout design for improved performance and convenience.

Video: STARESSO Mirage SP300 Plus Product Demonstration

Product Overview

The STARESSO Mirage SP300 Plus is a compact and versatile manual espresso maker designed for coffee enthusiasts on the go. Its innovative design allows for easy portability and high-quality espresso extraction.

Key Features:

  • Flexible Rocket Design: Detachable, unfoldable, and foldable components for ultimate portability.
  • Easy to Use: Simple four-step process to brew espresso in minutes.
  • Sturdy Construction: Internal stainless steel for high pressure and oxidation prevention; external BPA-free silicone for anti-skidding and heat protection.
  • High Compatibility: Supports ground coffee, tea powder (Teapresso), hot water (Espresso), and iced water (Cold Brew).
  • Golden Creamy Espresso: Capable of producing rich, creamy espresso shots.
  • New Version: Features a single spout design, an upgrade from the older two-spout version, without changing core functionality.
STARESSO NEW SP300 Plus with single spout design
Figure 1: STARESSO Mirage SP300 Plus (New Version)
Flexible Rocket Design showing detachable, unfold, and foldable configurations
Figure 2: Flexible Rocket Design for Portability
Comparison of old (two spouts) vs new (single spout) design
Figure 3: Old (two spouts) vs New (single spout) Design

Specifications

FeatureSpecification (PRO / SP-300)
Folded Size3.3" x 2.7" x 7.5" (8.5 x 7 x 19 CM)
Unfold Size5.9" x 2.7" x 9" (15 x 7 x 23 CM)
Net Weight1.5 LB (680 G)
Water Capacity6.1 FL OZ (180 ML)
CompatibilityCoffee Grounds, Tea Powder, Hot Water, Iced Water
Max Grounds0.77 OZ (22 G)
Working Pressure217 - 290 PSI (15 - 20 BAR)
Internal MaterialStainless Steel
External MaterialBPA-free Silicone
CertificationFCM
Detailed specifications table for PRO (MIRAGE) / SP-300
Figure 4: Product Specifications

Setup Instructions

Before first use, disassemble all removable parts and wash them with warm soapy water. Rinse thoroughly and dry.

Components:

  • STARESSO Mirage SP300 Plus Espresso Maker
  • Coffee Spoon
  • Espresso Cup (integrated)
Disassembled components of the espresso maker
Figure 5: Disassembled Components

Operating Instructions

Follow these simple steps to brew a perfect espresso:

  1. Prepare Coffee Grounds: Unscrew the bottom part of the espresso maker to access the filter basket. Fill the filter basket with your desired amount of fine coffee grounds (up to 22g). Ensure the grind size is appropriate for espresso, ideally a fine grind similar to salt.
  2. Visual guide for coffee grind sizes (Espresso size Okay, Salt size The BEST)
    Figure 6: Recommended Coffee Grind Size
  3. Assemble Filter Basket: Tamp the coffee grounds lightly and screw the filter basket back onto the main body of the espresso maker.
  4. Fill Water: Unscrew the top cap and remove the pumping rod. Fill the water chamber with hot water (for espresso) or cold water (for cold brew) up to the 180ml mark.
  5. Reassemble: Insert the pumping rod back into the water chamber and screw on the top cap securely.
  6. Position and Pump: Unfold the legs of the espresso maker and place it on a stable surface with the integrated espresso cup underneath the spout. Begin pumping the rod slowly and steadily. You will feel resistance as pressure builds. Continue pumping until espresso starts to flow into the cup.
  7. Easy To Use steps: Fill Coffee Grounds, Fill Water, Pump It, Make Coffee
    Figure 7: Easy Brewing Steps
    Close-up of espresso extraction
    Figure 8: Espresso Extraction
  8. Enjoy: Once the desired amount of espresso is brewed, stop pumping. Your fresh, creamy espresso is ready to enjoy!

Maintenance and Cleaning

Regular cleaning is essential to maintain the performance and longevity of your STARESSO Mirage SP300 Plus.

  • After Each Use: Disassemble all parts. Rinse the filter basket, water chamber, pumping rod, and cup under running water. Remove any residual coffee grounds.
  • Deep Cleaning: Periodically, wash all components with warm soapy water. Use a soft brush to clean hard-to-reach areas. Ensure all soap residue is thoroughly rinsed off.
  • Drying: Allow all parts to air dry completely before reassembling or storing to prevent mold or odors.
  • Seals and Gaskets: Inspect rubber seals and gaskets regularly for wear and tear. Replace if necessary to maintain proper pressure during brewing.
  • Storage: Store the espresso maker in a clean, dry place. Its foldable design makes it compact for storage.
Sturdy Coffee Maker materials: Stainless steel interior, BPA-free silicone exterior
Figure 9: Internal Stainless Steel and External BPA-free Silicone Materials

Troubleshooting

  • No or Weak Espresso Flow:
    • Check if the coffee grounds are too fine, causing clogging. Adjust grind size.
    • Ensure the filter basket is not overfilled or tamped too hard.
    • Verify all parts are securely tightened to prevent pressure loss.
    • Check rubber seals for damage or improper seating.
  • Espresso Tastes Bitter/Sour:
    • Bitter: Coffee grounds might be too fine, water too hot, or extraction too long.
    • Sour: Coffee grounds might be too coarse, water not hot enough, or extraction too short.
  • Difficulty Pumping:
    • Coffee grounds may be too fine or over-tamped.
    • Ensure the pumping mechanism is clean and free of debris.

User Tips

  • Grind Consistency: For the best results, use fresh coffee beans and grind them just before brewing. A proper espresso grind (fine, like salt) is crucial. Experiment with grind size to find your preferred taste.
  • Pre-infusion: Some users find that a short pre-infusion (pumping gently until a few drops appear, then pausing for a few seconds before continuing to pump) can enhance flavor extraction.
  • Unpressurized Basket: For those looking to level up their espresso game, consider purchasing an unpressurized basket. This allows for more control over the extraction process and can yield a richer, more nuanced espresso, especially with fresh, high-quality beans.
  • Pumping Technique: Develop a consistent and steady pumping rhythm. The pressure range of 15-20 BAR is achieved through manual pumping, and practice will help you achieve optimal extraction.
  • Scale Compatibility: Be aware that the SP300's support legs might interfere with larger coffee scales. Consider compact scales or alternative methods for measuring espresso yield if precise measurements are desired.
  • Authenticity: Always purchase from reputable sellers to ensure you receive an original STARESSO product.

Warranty and Support

For warranty information and customer support, please refer to the official STARESSO website or contact the retailer where you purchased your product. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.