1. Product Overview
The Tuya Smart WiFi Solar Infrared Motion Detector is a versatile security device designed for outdoor and indoor use. It features solar charging, a loud siren, and a sensitive PIR motion sensor to detect movement and deter intruders. The CT80WR model offers smart control via the Tuya Smart or Smart Life mobile application, while the CT80R model is controlled by a remote.

Product Components
- Solar charging panel
- Speaker
- Detection window
- LED indicator light
- Swivel bracket bayonet
- USB power supply port
- Function keys
- Button silicone (for adjusting detection distance)

2. Setup and Installation
2.1 Charging the Device
The device can be charged via its solar panel or a USB power supply.
- Solar Charging: Ensure the solar panel receives at least 4 hours of direct sunlight exposure. The built-in LED indicator will light up slightly when charging.
- USB Charging: Connect a USB cable to the USB power supply port on the back of the device.

2.2 Fixed Installation
Follow these steps to securely mount your motion detector:
- Punch two holes on the wall at the desired installation location.
- Insert expansion pipes into the drilled holes.
- Secure the fixed bracket to the wall using screws.
- Align the device with the swivel bracket bayonet on the fixed bracket and slide it downwards to secure.

2.3 Recommended Installation Height
The optimal installation height and detection distance can vary based on the environment. Refer to the guidelines below:
| Installation Height | Daytime Vertical Distance | Night Detection Distance | Notes |
|---|---|---|---|
| 1.8m | ≤5mm (Max 10m) | 9-12m | Standard detection |
| 2.0m | ≤6mm (Max 9m) | 9-12m | Slightly reduced range |
| 2.2m | ≤9mm (Max 10m) | 9-12m | Optimal for wider coverage |
The detection angle is 110° horizontally and 20° vertically. For best results, install the device where movement crosses the detection zone rather than directly towards or away from it.


3. Operating Modes
The device offers multiple operating modes, selectable via the function key on the back of the alarm or the remote control.
3.1 Mode Selection via Function Key (on device)
Short press the function key to cycle through modes. The LED indicator will flash and beep to confirm the selected mode:
- Mode 1: Full Day Flash/Alarm (1 "Di" beep, LED flashes once). The alarm will sound and flash for 20 seconds upon motion detection, day or night.
- Mode 2: Night Flash/Alarm (2 "Didi" beeps, LED flashes twice). The alarm will sound and flash for 20 seconds upon motion detection only at night. During the day, it charges without sensing or alarming.
- Mode 3: Night Flash Only (3 "Dididi" beeps, LED flashes three times). The device will flash for 20 seconds upon motion detection only at night, without sounding an alarm. During the day, it charges without sensing or alarming.
- Mode 4: Remote Control Pairing (4 "Didididi" beeps, LED slowly flashes). Use this mode to pair a new remote control.
- Mode 5: Power Off (LED remains on for 3 seconds). The device will power off.

3.2 Remote Control Operation (for CT80R and CT80WR)
The remote control allows convenient mode switching and arming/disarming within a 10-meter range.
- Arming Key (24/Sun icon): Activates Mode 1 (Full Day Flash/Alarm).
- Disarm Key (OFF/Lock icon): Disarms the alarm. No sensing or alarm will occur. The LED indicator flashes twice ("Didi").
- Night Flash/Alarm Key (Moon/Speaker icon): Activates Mode 2 (Night Flash/Alarm).
- Night Flash Only Key (X icon): Activates Mode 3 (Night Flash Only).

3.3 Remote Control Pairing
Remote controls are pre-paired at the factory. If you need to pair a new remote or control multiple alarms with one remote:
- On the alarm device, short press the function key until it enters Mode 4 (Remote Control Pairing). You will hear four "Didididi" beeps, and the LED indicator will slowly flash.
- Within 20 seconds, press any key on the remote control.
- A single beep will confirm successful pairing. The LED indicator will go out, and the device will automatically return to Mode 1.
Note: One remote control can be paired with up to 500 alarms.
4. Mobile App Connection (CT80WR Model Only)
The CT80WR model can be connected to the Tuya Smart or Smart Life mobile application for remote monitoring and control.
- Download the App: Download "Tuya Smart" or "Smart Life" from your device's app store (App Store for iOS, Google Play for Android).
- Register/Login: Open the app and register a new account or log in to an existing one.
- Enable Wireless Functions: Turn on your phone's Wi-Fi and Bluetooth functions.
- Add Device: In the app, tap "Add Device" or the "+" icon.
- Enter Pairing Mode: On the alarm device, long press the function key for approximately 5 seconds until the LED light flashes slowly. This indicates it's in network pairing state.
- Connect to Wi-Fi: The app will discover the device. Select it and enter your 2.4G Wi-Fi network name and password (5G Wi-Fi is not supported).
- Complete Connection: Follow the on-screen prompts to complete the connection. Once added successfully, you can monitor and control the device via the app.
Note: The app will push low-voltage alarms if the solar infrared power drops below 20%.

5. Specifications
| Feature | Specification |
|---|---|
| Model Number | CT80WR (WiFi), CT80R (Remote Control) |
| Product Name | Outdoor PIR Alarm Detector |
| Detecting Angle | 110 degrees (Horizontal), 20 degrees (Vertical) |
| Detection Distance | 6-9m (up to 12m at night, up to 39ft with high sensitivity) |
| Alarm Volume | 120dB |
| Charging Mode | Solar charging / USB Power |
| Backup Battery | 3.7V 600mAH lithium battery |
| Waterproof Rating | IP65 |
| Network (CT80WR) | Wi-Fi (IEEE 802.11 b/n/g 2.4G) |
| Remote Control Frequency | 433.92MHz (1527 protocol) |
| Remote Control Distance | ≤10 meters |
| Solar Charging Time | > 10 hours (depends on sun intensity) |
| Standby Time | Up to 30 days on a full charge |
| Certifications | CE, FCC |
6. Troubleshooting
- Alarm not sounding/flashing:
- Check if the device is in the correct operating mode (Mode 1 or Mode 2 for alarm).
- Ensure the device is sufficiently charged (solar or USB).
- Verify the detection distance setting is appropriate for the environment.
- Remote control not working:
- Ensure the remote control is within the 10-meter operating range.
- Re-pair the remote control following the instructions in Section 3.3.
- CT80WR not connecting to mobile app:
- Confirm your phone's Wi-Fi and Bluetooth are enabled.
- Ensure you are connecting to a 2.4G Wi-Fi network, not 5G.
- Verify the Wi-Fi name and password are entered correctly.
- Make sure the device is in pairing mode (LED slowly flashing) before attempting to add it in the app.
- False alarms:
- Adjust the detection distance using the button silicone on the back of the device.
- Ensure the device is not pointed at moving objects like tree branches or reflective surfaces.
- Consider the installation height; refer to Section 2.3 for optimal placement.
- Alarm duration: The alarm sounds and flashes for 20 seconds upon detection. This duration is fixed and cannot be changed.
7. User Tips
- For optimal solar charging, place the device in an area that receives direct sunlight for at least 4 hours daily.
- If using multiple alarms, a single remote control can be paired with up to 500 devices, simplifying control.
- The CT80WR model's mobile app connectivity allows for remote monitoring and instant notifications to your phone when motion is detected.
- When installing, consider the detection angle and direction of potential intruders. Positioning the sensor to detect movement across its field of view (rather than directly towards it) can improve accuracy.
- The device is suitable for various outdoor environments like gardens, yards, farms, and orchards, providing effective deterrence against both human intruders and animals.
8. Warranty and Support
For warranty information and technical support, please refer to the official product page or contact the seller directly. A detailed user manual in PDF format is available for download: User Manual (PDF).